SIEMENS FHA2041-R1 Enclosure Cover Instruction Manual
- June 9, 2024
- SIEMENS
Table of Contents
SIEMENS FHA2041-R1 Enclosure Cover Instruction Manual
INSTALLATION INSTRUCTIONS
The Model FHA2041-R1 enclosure cover from Siemens Industry, Inc., is used in the Desigo FV2025/2050 and Cerberus PRO FV922/924 systems as a protective cover over the ventilation holes in the top of the FHB2005-R1 backbox to meet code requirements restricting openings at the top of the enclosure.
NOTES
- The FHA2041-R1 enclosure cover is designed for indoor use only in dry, protected environments.
- The “R1” extension to the Desigo and Cerberus PRO part numbers identifies the paint color and sales channel through which the part is marketed. The “R” the part number extension designates parts painted red to meet local code requirements. The numeral following the color designation identifies the sales channels for the part, as follows:
a. 1: All channels
b. 2: Desigo
c. 3: Cerberus PRO
INSTALLATION
- Refer to Figure 1, insert the two #6-32 x ⅜” screws (provided) into the backbox as shown. Do not tighten.
- Align the enclosure cover mounting slots over the screws inserted in step 1 and lower the enclosure cover into position. Tighten the screws.
COMPATIBILITY
The FHA2041- R1 enclosure cover can only be used with the FHB2005-R1 backbox.
SUPPLIED WITH PART
(Qty 2) #6-32 x ⅜” round-head screws
SPECIFICATIONS
| Physical dimensions | 2 13/16” L x 2 1 /4” D x 1 9 /16” H |
|---|---|
| Weight | 1 /2 lbs |
| Material | 16 GA. (.063) aluminum |
| Finish | Undercoating: Phosphate treatment Paint: Polyester powder coating |
Color: RAL3020 Red
Siemens Industry, Inc. Siemens Canada Limited Document ID: A6V10370383 _en–a
Building Technologies Division Building Technologies Division P/N: A5Q00058007
Florham Park, NJ 2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada