ZINC E4 Unicorn Electric Scooter Owner’s Manual
- June 16, 2024
- zinc
Table of Contents
- ZINC E4 Unicorn Electric Scooter
- Product Information
- FAQ
- PRODUCT OVERVIEW
- SAFETY WARNINGS – READ BEFORE USE
- SAFETY WARNINGS – READ BEFORE USE
- BEFORE YOU START
- HOW TO RIDE
- OPERATING RANGE
- BATTERY WARNING
- CHARGING THE BATTERY
- HARDWARE MAINTENANCE
- SCOOTER SPECIFICATIONS
- TROUBLESHOOTING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZINC E4 Unicorn Electric Scooter
Product Information
Specifications
- Model: E4 Unicorn
- Age Range: 6+
- Product Type: Electric Scooter
- Manufacturer: Hy-Pro
- Website: www.zincsports.com
Product Overview
The E4 Unicorn Electric Scooter is a fun and stylish scooter designed for
riders aged 6 and above. It features a handlebar with tassels, a folding latch
for easy storage, a deck sensor for convenient on/off control, and a rear
brake for safe stopping. The scooter also has a height-adjustable handlebar to
accommodate different riders.
Safety Warnings
Before using the E4 Unicorn Electric Scooter, it is important to read and
understand the following safety warnings:
- Ensure you are at least 6 years old to ride this scooter.
- Do not ride over speed bumps, thresholds, or other bumps at high speed.
- Do not use the scooter when it is raining or freezing.
- Watch your speed when traveling downhill.
- Avoid contacting obstacles with the tire/wheel.
- Do not hang anything on the handlebar.
- Do not ride the scooter with only one foot.
- Watch your head when passing through doorways.
- Do not ride on public roads, motorways, or highways.
- Do not rotate the handle violently while driving at high speed.
- Do not ride with multiple passengers or carry a child.
- Do not trample the rear end of the fender.
- Do not ride up and down stairs or jump over obstacles.
- Do not take your hands off the handlebar while riding. Do not ride with one hand only.
- Always make sure you are in a safe place and open area before starting your scooter.
Assembly / Height Adjustment / How to Ride
- Open the folding latch to unfold the scooter.
- Adjust the height of the handlebar using the height adjust clamp.
- To ride, place both feet on the deck and push off with one foot to start moving. Use the handlebar to steer and control your speed.
Operating Range / Battery Warning
The operating range of the E4 Unicorn Electric Scooter depends on various
factors such as rider weight, terrain, and riding conditions. It is
recommended to fully charge the battery before each use to maximize the
operating range. The battery warning indicator will alert you when the battery
is running low.
Charging the Battery / Battery Disposal
To charge the battery:
- Locate the charging port on the scooter.
- Connect the charger to the charging port.
- Plug the charger into a power outlet.
- Wait for the battery to fully charge. The charging time may vary.
- Disconnect the charger from the scooter and power outlet. When disposing of the battery, follow local regulations and guidelines for proper disposal of electronic waste.
Hardware Maintenance / Spec
Regular hardware maintenance is important to ensure the optimal performance
and longevity of your E4 Unicorn Electric Scooter. Refer to the User Manual
for detailed instructions on how to maintain the scooter’s hardware. The
specifications of the scooter are subject to change without notice.
Troubleshooting Guide / Spare Parts
If you encounter any issues with your E4 Unicorn Electric Scooter, refer to
the Troubleshooting Guide in the User Manual for possible solutions. If
replacement parts are needed, please visit our website or contact our customer
service team for assistance.
Warranty
To ensure that your warranty is valid, please register your E4 Unicorn
Electric Scooter on our website within 30 days of receiving the product. For
more information about the warranty, please refer to the Warranty section in
the User Manual.
FAQ
Q: Where can I register my warranty?
A: You can register your warranty at
www.zincsports.com within 30 days of receiving
the product.
Q: How can I contact customer support?
A: You can contact our customer service team by calling +44(0) 800 731 0006
or emailing customerservices@zinchq.com.
Q: Can I ride the scooter in the rain?
A: No, it is not recommended to use the scooter when it is raining or freezing.
WARRANTY
SO THAT YOUR WARRANTY IS VALID PLEASE REGISTER AT WWW.ZINCSPORTS.COM WITHIN
30 DAYS OF RECEIVING THE PRODUCT.NOTE: MANUAL ILLUSTRATIONS ARE FOR REFERENCE
ONLY.
ILLUSTRATIONS MAY NOT REFLECT THE EXACT APPEARANCE OF THE ACTUAL PRODUCT.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE RIDING! CUSTOMER HELPLINE
Hy-Pro advises you to contact us directly and not to return this item to the
place of purchase. Hy-Pro has taken great care to ensure this item has reached
you in good condition, should you have a query please ring our helpline +44(0)
800 731 0006 where your call will be dealt with promptly. Alternatively,
please contact us by email:
customerservices@zinchq.com
PRODUCT OVERVIEW
SAFETY WARNINGS – READ BEFORE USE
WARNING: BE SURE THAT YOU ARE IN A SAFE PLACE AND OPEN AREA BEFORE STARTING YOUR SCOOTER. NEVER START THE SCOOTER UNTIL YOU HAVE TAKEN GOOD HOLD OF THE HANDLEBARS AND BALANCE YOURSELF ON THE SCOOTER.
SAFETY WARNINGS – READ BEFORE USE
WARNING
NOT FOR RIDERS UNDER THE AGE OF 6. Protective equipment should be worn. Not
to be used in traffic. 50kg max. This includes backpacks and other items that
might be carried. Exceeding the weight limit could injure the rider and damage
the E4 Unicorn Scooter. Rider weight does not necessarily mean a person’s size
is appropriate to maintain control of the scooter. Keep this product away from
small children and remember that it is intended for use only by one person
who, at a minimum, is completely comfortable and competent while operating the
E4 Unicorn Scooter.
WARNING
Follow all local laws for pedestrians and vehicles. Check local laws and
regulations to see where and how you may use your E4 Unicorn Scooter legally.
WARNING
Only use the E4 Unicorn Scooter outdoors. Avoid obstacles and slippery
surfaces as these could cause a loss of balance for yourself or the scooter
and could cause harm. Always disconnect from the charger prior to wiping down
and cleaning your scooter with a damp cloth. FAILURE TO USE COMMON SENSE AND
HEED THE ABOVE WARNINGS INCREASES THE RISK OF SERIOUS INJURY. USE WITH
APPROPRIATE CAUTION AND SERIOUS ATTENTION FOR SAFE OPERATION. Do not ride
indoors or on surfaces that could become damaged such as carpet or glossy
flooring. Be sure to regularly inspect and service the scooter and make sure
all components and warning labels are in good condition. Check all the
fasteners and bolts are securely tightened before each use. Riding the
scooter is not advisable for persons with heart disease, pregnant women,
people with illness, or disabilities, or who have recently had an operation.
There is always a risk of injury and riders should carefully assess their own
health and physical condition. If they are in any doubt as to their fitness to
ride the scooter, they should consult with their GP beforehand. After
unpacking this product and before you first ride it, remember to charge it for
at least 3 hours. Do not overcharge it, otherwise the service life of the
battery and the charger may be compromised. PLEASE NOTICE Speed and weight
limits are set for your own safety. Please do not exceed the limits listed in
the User Manual.
Weight Restrictions
Maximum Weight: 50 kg.
Max. Scooter Speed
Maximum Speed: 5mph/8kph
WARNING
THE CONTROLLER WILL AUTO-CUT THE CIRCUIT IF OVERLOADED / CLIMBING A STEEP
SLOPE, TO PROTECT THE MOTOR. THE RIDER CAN PUSH FORWARD WITH ONE FOOT AND THE
DECK SENSOR WILL RE-ACTIVATE THE MOTOR.
WARNING
BE SURE THAT YOU ARE IN A SAFE PLACE AND OPEN AREA BEFORE STARTING YOUR
SCOOTER. NEVER START THE SCOOTER UNTIL YOU HAVE TAKEN GOOD HOLD OF THE
HANDLEBARS AND BALANCE YOURSELF ON THE SCOOTER.
For your safety, please read the safety warnings carefully, and make sure you
understand and accept all the safety instructions. The user will be
responsible for any loss or damage caused by improper use.
WARNING
-
Please wear all appropriate safety and protective gear such as helmet, knee and elbow pads, and protective gloves, before operating the scooter.
-
Make sure to wear comfortable clothes and flat, closed-toe shoes when operating your scooter. Keep laces tied.
-
Please carefully read the User Manual, which will assist in explaining the basic working principles and provide tips on how to best enjoy your scooter experience.
-
Do not try to open or modify your scooter, as doing so will invalidate your manufacturer warranty, and may cause failure to your device leading to serious bodily injury or death.
-
Do not ride your scooter near motor vehicles or on public roads/highways. It’s the customer’s responsibility to ensure that their electric scooter is used in accordance with all local and country laws.
-
Do not operate the scooter while under the influence of drugs and/or alcohol.
-
Do not operate the scooter when you are restless or sleepy.
-
Use your best judgment to keep yourself out of dangerous situations with your scooter.
-
Do not ride your scooter off of curbs, or ramps, or attempt to operate in a skate park, empty pool, or in any way similar to a skateboard or stunt scooter. THE SCOOTER IS NOT A STUNT SCOOTER.
-
Do not turn sharply, especially at high speeds.
-
Do not abuse your scooter, doing so can damage your unit and cause failure to the operating system leading to injury.
-
Do not drive in or near puddles of water, mud, sand, stones, gravel, or debris or near rough and rugged terrain.
-
The scooter can be used on paved private land that is flat and even. If you encounter uneven pavement, please lift your scooter over and past the obstruction.
-
Do not ride in inclement weather: snow, rain, hail, sleek, on icy surfaces, or in extreme heat.
-
Do not ride in or near puddles, pools, or other large bodies of water.
-
Bend your knees when riding on bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance. If you are unsure if you can safely ride on a specific terrain, step off and carry your scooter.
ALWAYS RIDE WITH CAUTION. -
Do not attempt to ride over bumps or objects greater than 1.5cm even when prepared and bending your knees.
-
PAY ATTENTION – look at where you are riding and be aware of the road conditions, people, places, property, and objects around you. Draw attention to the potential hazards of using the toy in areas other than private grounds. The
-
scooter should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
-
Do not operate the scooter in crowded areas.
-
Operate your scooter with extreme consideration for people and property at all times.
-
Do not operate the scooter while talking, texting, or looking at your phone not ride your scooter where it is not permitted.
-
Do not use the scooter to place yourself or anyone else and their property in danger.
-
Do not climb or travel down steep hills with your scooter.
-
The scooter is intended for use by one person, DO NOT attempt to operate the scooter with two or more people.
-
Do not carry anything in your arms while riding the scooter.
-
Women who are pregnant should not operate the scooter.
-
Riders should not operate the scooter without proper instruction and supervision from an experienced adult user.
-
At higher speeds, always take into consideration your stopping distance is increased.
-
Do not ride the scooter in wet or icy weather and never immerse the scooter in water, as the electrical and drive components could be damaged by water or create other possibly unsafe conditions.
-
Do not attempt to jump on or off your scooter.
-
Do not ride the scooter in dark or poorly lit areas.
-
Do not operate your scooter on rough terrain.
-
Must ensure that all locking devices are engaged before every use.
-
Avoid driving the scooter in unsafe places, including near areas with flammable gas, steam, liquid, dust, and fiber, which could cause fire and explosive accidents.
-
Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death.
-
This toy is unsuitable for children under 6 years old due to its maximum speed.
-
Keep the instructions since they contain important information.
BEFORE YOU START
Before you first experience your scooter, please read the USER MANUAL thoroughly and learn the basics to ensure your safety and the safety of others.
WARNING
Failure to follow the basic instructions and safety precautions listed in
the USER MANUAL can lead to damage to your scooter, other property damage,
serious bodily injury, and even death.
Adult assembly is required.
Allow at least 3 hours for the initial charge. By not doing so you will
invalidate the warranty. WARNING! Before assembling the scooter, please check
whether the power switch is in the “OFF” position, if not, please put it in
the “OFF” position before continuing with assembly.
ASSEMBLY
- Assembly can typically be completed in up to 5 minutes, not including the initial charge time.
- Charging time is at least 3 hours for the first time.
To unfold the E4 Scooter
Release lever
- Pull up
- to release and unfold
- until the locking mechanism locks into the slot. Hand-tighten the nut on the opposite side of the quick-release lever. Close the quick-release lever
- (The degree of tension of the quick-release lever will depend on how tight the nut is. Be careful not to have the lever too loose as this may cause issues.)
Handlebar Assembly
Remove the top plate with the Allen key provided. Centrally align the
handlebar grips across the stem. Replace the top part of the clamp, ensuring
it locks together at point ‘A’. Firmly tighten the top nut with the Allen key.
To fold the E4 Scooter
Release lever
- Pull up
- to release and fold
- Hand-tighten the nut on the opposite side of the quick-release lever. Close the quick-release lever
HEIGHT ADJUSTMENT
How to adjust the height of the stem.
HOW TO RIDE
Warning: There is a risk of falling down whilst riding, so make sure to wear a helmet and protection kits all the time.
- Turn on the scooter via the switch under the footplate.
- Put one foot on the Deck Sensor and kick off with the other foot. The E4 Unicorn is kick motion activated.
- You will need to press the deck sensor continuously for the motor to engage.
- Once in motion, the motor propels the E4 Unicorn up to 5mph/8kph.
- To stop – release the deck sensor and press the rear foot brake until stopped then step off your scooter.
- Turn off the scooter via the switch under the footplate.
- Deck Sensor
OPERATING RANGE
Please notice the scooter can travel a distance of 3.1 miles/5 km on a fully charged battery in ideal conditions. The following are some of the major factors that will affect the operating range of your scooter.
- Terrain : A smooth, flat surface will increase your driving distance, while driving uphill, as well as rough or uneven terrain will reduce your distance significantly.
- Weight : The weight of the user can affect driving distance, a lighter user will have further range than a heavier user.
- Ambient temperature: Please ride and store the scooter under recommended temperatures, which will increase driving distance, battery life, and overall performance of your scooter.
- Maintenance : Reasonable battery charging and maintenance will increase the distance. Overcharging the battery can reduce range.
- Driving Style: Frequent starts, stops, idling and deceleration will reduce your overall distance.
BATTERY WARNING
Battery Specifications
BATTERY WARNING
Failure to follow the Safety Precautions listed below could lead to serious
bodily injury and death. Seek immediate medical attention if you are exposed
to any substance that is emitted from the battery.
- This product is not to be connected to more than the recommended number of batteries.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Rechargeable batteries are to be removed from the toy before being charged.
- Different types of batteries or new and used batteries are not to be mixed.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited.
- Do not disassemble or modify the battery. The battery contains safety and protection devices, which, if damaged, may cause the battery to generate heat, explode or ignite.
- Do not use your scooter if the battery begins to emit odor, overheats, smokes, changes color/shape, or appears abnormal in any other way.
- Do not touch any leaking materials, or breathe fumes emitted.
- Do not allow children and animals to touch the battery.
- The battery contains dangerous substances, do not open the battery, or insert anything into the battery.
- Do not connect the positive terminal and negative terminal of the battery to each other with any metal object (such as wire).
- Do not attempt to charge the scooter if the battery has discharged or emitted any substances. In that case, the battery should be abandoned for safety.
- Please follow all local, state, and federal laws in regards to recycling, handling, and disposing of Lithium batteries.
- Do not carry or store batteries together with necklaces, hairpins or other metal objects. Do not pierce the battery with nails, strike the battery with a hammer, step on the battery or otherwise subject it to strong impacts or shocks. Do not expose battery to water, or allow the battery to get wet.
- Do not place the battery in an environment where the ambient temperature is higher than 50°C or lower than -20°C (e.g. do not leave the scooter or the battery pack in a car under direct sunlight for an extended time). Do not throw the battery pack into fire as it may lead to battery failure, battery overheating, and even another fire. If the scooter is expected to be left idle for more than 30 days, please fully charge the battery and place it in a dry and cool place. Keep in mind to recharge it every 30 days to protect the battery from potential damage which is beyond limited warranty.
CHARGING THE BATTERY
This section is intended to provide you with basic information about your
battery and charger. Please read this section carefully to ensure your safety.
For user safety and to prolong the life of your battery, as well as improve
battery performance, please follow these instructions.
When the battery has run down, please charge your battery for 3 hours with the
charger that you received with your scooter.
- Step 1: Ensure your scooter is turned off before you attempt to charge the battery.
- Step 2: Ensure that the charging port is clean and dry.
- Step 3: Plug the charger into the power socket, and make sure the light on the charger is lit GREEN.
- Step 4: Put the male DC connector plug into the charging port of the scooter. The indicator light on the charger should change to RED, indicating that your scooter is now being charged. When the RED indicator light on your charger turns to GREEN then your scooter is fully charged. A full charge typically occurs at 3 hours.
- Step 5: Please unplug the charger from your scooter and from the power outlet.
IMPORTANT NOTES ABOUT CHARGING
If the green light on your charger does not turn RED when you plug it into
your scooter, it could mean you have to check the cables to ensure you have a
proper connection; or that your scooter is already fully charged.
- Do not overcharge as this will affect the life of the battery and may cause overheating which can lead to a fire hazard. Never charge near flammable materials or liquids.
- The best charging temperatures are between 0°C~45°C. Extreme cold and extreme heat will prevent your battery from charging fully.
- Make sure to unplug your charger before standing on or operating your scooter, as this can be very dangerous.
- Use only the charger and charging cable supplied by Hy-Pro. Use of any other charger or cable may lead to damage to the product, overheating and risk of fire. Use of any other charger or cable voids the warranty. If you spot any signs of wear and tear or damage, visit our website at zincsports.com or contact us at customerservices@zinchq.com to buy a replacement charger.
- The charger is not a toy, it should be operated by an adult.
- Once your scooter has been charged, unplug the charger from the wall outlet and then from the scooter. Do not leave the scooter on charge overnight and do not leave the scooter unattended whilst on charge.
- In an ideal situation, you would have somewhere secure to store/charge your scooter, such as a shed or garage. It would also be desirable for this area to have plugs where you can charge your scooter.
- Ensure you have working smoke alarms on every floor of your home and in the room where you charge the scooter.
- Plug the cable into a main socket rather than an extension lead.
- Do not cover the battery/product with anything while charging.
- Make sure you use the battery recommended by the manufacturer.
NOTE
The charger itself may get quite warm to the touch when charging a deeply
discharged battery.
BATTERY DISPOSAL
Do not store the battery in temperatures above 50˚C or below -20˚C.
CONTAINS SEALED LITHIUM-ION BATTERIES. BATTERIES MUST BE RECYCLED. Your Zinc
product uses sealed lithium-ion batteries which must be recycled or disposed
of in an environmentally sound manner. Do not dispose of a lithium-ion battery
in a fire. The battery may explode or leak. Do not dispose of a lithium-ion
battery in your regular household trash. The incineration, landfilling or
mixing of sealed lithium-ion batteries with household trash is prohibited by
law in most areas. Return exhausted batteries to a local, approved battery
recycler or a local seller of automobiles.
HARDWARE MAINTENANCE
INSPECTION, MAINTENANCE, AND STORAGE
Your scooter requires routine inspection and maintenance, it is a factor of
safety. This chapter describes maintenance steps and important operating tips.
Before you perform the following operations, ensure the scooter is turned off
and the charging cable is disconnected.
INSPECTING AND CLEANING YOUR SCOOTERF
- Routinely check the body of the scooter and tires for damage or excessive wear.
- Wet a clean cloth with clean water, rinse the cloth thoroughly, and wipe the body of the scooter making sure that water does not get into the power button, charging port, or tires. If water or other liquids enter the scooter, it will cause permanent damage to the internal components.
BRAKE
Check the brakes function properly.
- When you apply the brake pedal, the rear wheel should stop rotating;
- Make sure the wheels are able to rotate freely, without getting stuck/stopping when the brake is not applied.
FRAME, FORK AND STEERING HANDLE
Check the frame, fork, and steering handle for cracks or loose connections.
Check all connection elements (such as a folding system) are correctly
tightened and not broken. It is necessary and important to check the
tightening of the various bolted elements regularly.
WHEELS AND TYRES
Wear and tear are unavoidable in the wheels and the driving system in the
course of operation. The user must regularly check the wheels and the driving
system for wearing and make adjustments or replacements when necessary. Please
make sure the front wheel is able to rotate freely. It is suggested to add
lubricant (30SAE lubricating oil is recommended) to the moving parts every 6
months.
BATTERY
Always switch off the power when the scooter is not in use. Never store the
scooter at a low temperature, it may damage or degrade the battery
permanently.
STORING YOUR SCOOTER
- Fully charge your battery before storing.
- If you are storing your scooter for an extended period of time, please fully charge your scooter at least once every month.
- If the ambient temperature of the storage location is below 0°C, please do not charge. You must bring the scooter into a warmer environment before charging.
- Check under Battery Specifications for more details.
- To prevent dust from getting into your scooter, try wrapping it or sealing it with its original packaging.
- Store your scooter indoors, at a dry and suitable temperature.
CHARGER
The charger supplied with the scooter should be regularly examined for damage
to the cord, plug, enclosure, and other parts. In the event of such damage,
the scooter must not be charged until the charger has been repaired or
replaced.
WARNING –
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY DAMAGE YOUR PRODUCT AND VOID
WARRANTY.
SCOOTER SPECIFICATIONS
- Net Weight: 4.82kg
- Max. Load: 50kg
- Max. Speed Limit: 5mph/8kph
- Max Distance: 3.1 miles/5 km *The range is tested in the lab (real range depends on user weight, incline, road condition, and other factors.)
- Battery: Lithium, 21.6V 2Ah
- Power Requirement: AC100-240V ~ 50/60HZ
- Size (fold): L 67 X W 37 X H 24.5 cm
- Size (unfold): L 73 × W 37 × H (78-86) cm
- Tyre: Solid tyre
TROUBLESHOOTING
SPARE PARTS
Due to general wear and tear, occasionally you may need to purchase spare parts to keep your scooter in peak condition. It is important to use the correct spare parts for your particular model ie. ZINC E4 UNICORN ELECTRIC SCOOTER, and that you purchase them directly from us. Visit our website WWW.ZINCSPORTS.COM and go to ‘Spare Parts’. If you have any problem selecting the parts you require, contact Zinc Customer Services at +44 (0) 800 731 0006.
WARNING
ONLY USE GENUINE ZINC REPLACEMENT PARTS. The scooter has been built to
certain Zinc design specifications. The original equipment supplied at the
time of sale was selected on the basis of its compatibility with the frame,
fork, and all other parts. Certain aftermarket products may or may not be
compatible and will invalidate the warranty if used.
WARRANTY
ZINC SPORTS ELECTRIC SCOOTER WARRANTY POLICY
Thank you for purchasing a Zinc electric scooter and we hope you enjoy using
it. Please ensure that you read the following warranty. In order for your
warranty to be valid you must satisfy the following conditions.
- All products must be registered at www.zincsports.com within 30 days of receiving the product for the warranty to be valid.
- Proof of purchase is also required for your warranty to be valid.
- You must be the original purchaser who bought the product from an authorized dealer, your warranty cannot be transferred.
- You must report any defects to Zinc Sports within 30 days of discovery of said defect else the warranty will not be valid.
- The warranty will not be valid where the user is outside the recommended age group and maximum user weight. (only where specified)
Failure to follow the conditions highlighted above means that your warranty will be void. We recommend that you save your original sales receipt. Assuming that you have followed the conditions highlighted above, your product will have a 12-month limited warranty from defects in the materials used to manufacture, and/or workmanship at the time of manufacture outside the areas covered below. Our warranty includes:
All scooters have an IP rating of IPX4. The warranty will be void if the scooter has any water ingress or damage as a result of water ingress. The warranty may be void if the scooter has been used in the rain, through deep puddles, jet washing, and submersion. No warranty is provided for corrosion damages as a result of contact with water/humidity conditions. All electric scooters include Liquid Contact Indicators on the battery pack. The Liquid Contact Indicators show if the device has come into contact with water or a liquid containing water, the Liquid Contact Indicators turn red when they come into contact with water or a liquid containing water. The warranty is void if the Liquid Contact Indicators are red. Under no circumstance will Zinc Sports be obliged to provide compensation for bodily injuries, death, property damages, losses, hindrance of profits, prevention of use, or any other damage that will be caused directly or indirectly as a result of usage of this device? Zinc Sports advises that you contact your insurance company to determine whether coverage is provided for the use of this scooter, or to take out a new policy. For the full warranty policy please visit our website at www.zincsports.com PRODUCT CODE: ZC08602 E4 UNICORN ©ZINC Manufactured by Hy-Pro International Hy-Pro House, Centrus Park, Arenson Way, Dunstable, Bedfordshire, LU5 5BN, UK Made in China HY-PRO EUROPE Cube Building, Monahan Road, Cork, T12H1XY Hy-Pro Asia Room 1011, 10/F, Peninsula Centre, 67 Mody Road, Kowloon, Hong Kong
NEED HELP? Visit our website fCUSTOMERSERVICESor replacement par@ZINCHQ.COMts and product support or call our customer serWWW.ZINCSPORTS.COM vice line on 44 0Contact us at 800 730006
References
- Zinc and Flyte Official Store | Shop Kids & Adults Scooters – ZINC - UK's No 1 Scooter Brand
- Zinc and Flyte Official Store | Shop Kids & Adults Scooters – ZINC - UK's No 1 Scooter Brand
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>