ZINC 50-5726 Heavy Duty Protection Pad Set Instruction Manual
- June 4, 2024
- zinc
Table of Contents
Heavy Duty Protection Pad Set
Instruction Manual
READ THIS MANUAL
CAREFULLY AND FOLLOW THE INSTRUCTIONS COMPLETELY
Complies with EN 14120:2003+A1:2007
Users with a body mass of more than 25kg to 50kg
FITTING YOUR PROTECTION PADS
FITTING TO BE SUPERVISED BY AN ADULT.
| 
---|---
ELBOW PADS…| …KNEE PADS
- First, open the Hook and Loop fasteners.
- The protectors are marked ‘Left Knee’, ‘Right Knee’, ‘Left Elbow’, and ‘Right Elbow’.
- Pull the correct protectors with sewn stockings, over the legs and arms.
- Ensure the plastic cap is centrally placed over the knee or elbow.
- Fix the protectors in place using the elastic closure straps, pulling them around the limbs and pressing the hook and loop closure in place.
- Ensure the elastic straps hold the pads firmly in place but not so tight that the blood circulation is affected. Remove the protectors – reverse the process.
WRIST GUARDS
- First, open the Hook and Loop fasteners.
- The guards for the wrist are marked ‘Left Wrist’ and ‘Right Wrist’.
- Pass your thumbs through the opening of the guard, with the palm resting on its padded inside.
- Now hold in place with the 3 straps, pulling them around your hand and fixing them with the hook and loop fastenings.
- The curved protective rail is now located in the middle of the palm.
- They must be firmly attached but not so tight that the blood circulation is affected. To remove the guards – reverse the process.
CLEANING YOUR PROTECTION PADS
Surface wipe clean only. Do not use bleach. Do not machine wash.
Dry at room temperature, away from heat sources.
Material: 15% Elastic / 25% Polyester / 22% EVA foam / 15% Polypropylene Shell
Style / 23% Lining.
SAFETY INFORMATION
INSPECTION: Carefully inspect the protection pads before each use. If
they no longer feel secure or are showing signs of wear or damage, please
discard them – as their performance may be reduced.
WARNING: The protectors are not intended to provide protection in the
event of a serious fall when traveling at speeds in excess of 12kph or
7.46mph.
These protectors help protect against superficial grazing and minor impact.
Do not store in direct sunlight.
Adult supervision is recommended during fitting.
Please be aware that changes in environmental conditions such as temperature
can significantly reduce the performance of the protective pads.
Please use the product in the manner it was intended. Any contamination,
alteration to the protector, or misuse would dangerously reduce the
performance of the protective pads.
Please fit the protective pads so the adjustable straps provide a comfortable
but secure fit. Please note that no protection can offer full protection
against injury. The expected service life of the protectors is 2 years! After
this period, the protectors must be replaced because they might no longer
perform adequately.
Performance levels
Level 1: Protectors intended to be suitable for normal roller sports.
Level 2: Protectors intended to be suitable for use in acrobatic roller
sports.
3 ranges of body mass are as follows:
Range A: Users with up to 25 kg body mass;
Range B: Users with a body mass of more than 25 kg to 50 kg;
Range C: Users with body mass above 50 kg.
Item: 30068.
ZC07759 / 07760 / 07761, Level 1, Size L, Range B
Manufacture year: 2021
CUSTOMER HELPLINE
Hy-Pro advises you to contact us directly and not to return this item to the
place of purchase. Hy-Pro has taken great care to ensure this item has reached
you in good condition, should you have a query please ring our helpline at +44
(0) 800 731 0006 where your call will be dealt with promptly.
Alternatively, please email
[email protected].
REMOVE ALL THE PACKAGING BEFORE GIVING IT TO A CHILD.
- PLEASE RETAIN THE PACKAGING AND MANUAL FOR FUTURE REFERENCE
- COLOUR & CONTENTS MAY VARY FROM THOSE SHOWN ON THE PACKAGING
Protection pads are designed to protect against impact caused by the collision of part of the body with an obstacle while doing roller sports. It has passed EN14120:2003+A1:2007 to show conformity to the EHSR of EU 2016/425 EU Type examination conducted by:
TUV SOD
Product Service Gmbh,
Ridlerstrage 65, 80339 Munchen, Germany.
Notified Body No: 0123.
www.hy-pro.co.uk
www.zincsports.com
Hy-Pro House, Centers Park, Arenson Way,
Dunstable, Bedfordshire LU5 5BN. UK
Hy-Pro Europe: Cube Building, Monahan Road, Cork,
T12H1XY – Republic of Ireland.