ZINC 8625250 Stunt Scooter Void Instruction Manual
- June 4, 2024
- zinc
Table of Contents
Stunt Scooter Void
Instruction Manual
8625250 Stunt Scooter Void
WARRANTY
SO THAT YOUR WARRANTY IS VALID PLEASE REGISTER AT
WWW.ZINCSPORTS.COM WITHIN 30 DAYS OF
RECEIVING THE PRODUCT.
8+
Included: – Allen Key|
---|---
1 x Stunt Peg|
1 x Stunt Peg Axle
Shorter Axle – Front
Longer Axle – Back|
Place the triple clamp over the vertical tube of the T-bar.| Insert the T-bar
onto the fork stem.| Tighten the screws with the Allen key from top to bottom
securely.
---|---|---
|
|
FITTING STUNT PEGS
FRONT PEG
Remove the front wheel nut using the Allen key and remove the axle. Take care
not to lose the spacers. Place the shorter front peg axle into the large open
end of the stunt peg. Using the alien key, tighten the front stunt peg onto
the front wheel.
REAR PEG
Remove the rear wheel nut using the alien key and remove the axle. Take care
not to lose the spacers. Place the longer rear peg axle into the large open
end of the stunt peg. Using the alien key, tighten the rear stunt peg onto the
rear wheel.
TO USE
- Grip the handlebars with your hands, and place one foot on the deck and the other foot on the ground.
- Pay attention to your surroundings and make sure that your riding area is clear.
- Kick backward with your foot beside the scooter to give you motion.
- Repeat this kicking action in order to stay in motion.
- To stop or slow down, place your kicking foot on the brake pedal above the rear wheel or put your kicking foot on the ground.
- Do not over-steer as this could cause you to fall off the scooter.
MAINTENANCE
- Please rotate the bearings and wheels to check if they are rolling smoothly.
- It is suggested to disassemble, clean, and add lubricant every 6 months paying extra attention to the moving parts, and clearing them of grit and dirt so they move freely. Please make sure the specifications of the parts are correct with the dealers if some parts need to be replaced.
- Do not leave this product in high temperatures, intense sunlight, or dusty areas. Store in a dry place.
- Do not make any modifications to this product. Any modifications made to this scooter will make your consumer rights null and void.
- Self-locking nuts and other self-locking fixings may lose their effectiveness over time. If any of these components are no longer functioning how they should, it is strongly recommended that you discontinue the use of the product and seek replacement parts from the dealer or importer of this product.
- Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners as they may damage the surfaces. Do not use alcohol, alcohol-based, or ammonia-based cleaners as they may damage or dissolve some components or soften the decals or the grip surface adhesive.
- The wheels and wheel bearings can become worn after regular use and can be replaced easily. Remove the axle bolts with two Allen keys and slide the wheel off its fork. Replace with the new item, screw in the bolt through the aligned fork and wheel then tighten with an Allen key on either side and tighten securely.
IMPORTANT SAFETY INFORMATION
- Always wear protective equipment such as helmets, gloves, and elbow and knee pads. Also, long-sleeved shirts and long trousers help protect the skin.
- Always wear fully enclosed shoes with the laces tightened securely and tucked into your shoes.
- All bolts, wheels, and handlebars should be checked and tightened before and after every use.
- This scooter should only be ridden on dry, flat, level ground. Do not use the scooter on uneven, wet ground, rocks, or gravel. Do not use it at dusk or night.
- Wet weather reduces traction, braking, and visibility.
- Excessive use of the brake will cause heat to generate which can damage the wheel and can cause brake failure. Allow brake and wheels to cool if used continuously. Do not touch the brake if hot as it may cause harm.
- All children and preteens should ride with adult supervision at all times. The supervisor should check all fasteners, wheels, and handlebars and tighten them before and after every use. In addition, the supervisor should ensure the rider is wearing all appropriate safety equipment.
- All local traffic and scooter riding laws and regulations must be followed at all times. Stay away from roads and highways, cars, and pedestrians, and respect other pavement users.
- Adult supervision is required during the initial assembly and maintenance procedures due to the risk of finger entrapment. Keep fingers away from moving parts, injury may occur.
WARNING
- Protective equipment should be worn. Not to be used in traffic. 100kg max.
- The scooter should be used with caution, since it requires great skill, so as to avoid falls or collisions causing injury to the user and the third parties.
- Do not take this scooter on the road or public highway.
- Please ensure that all locking devices are engaged.
Complies with BS EN 14619:2019 / EN14619:2019. Maximum weight 100kg for Class
A.
Keep the instruction since it contains important information.
WARRANTY
Thank you for purchasing a Zinc Scooter and we hope that you enjoy using it.
Please ensure that you read the following warranty. In order for your warranty
to be valid, you must satisfy the following conditions. All products must be
registered at www.zincsports.com within 30
days of receiving the product for the warranty to be valid. Proof of purchase
is also required for your warranty to be valid. You must be the original
purchaser who bought the product from an authorized dealer, your warranty
cannot be transferred. You must report any defects to Zinc Sports within 30
days of discovery of said defect else the warranty will not be valid. Failure
to follow the conditions highlighted above means that your warranty will be
void. We recommend that you save your original sales receipt. The warranty
lasts 1 year from the date of purchase. The warranty covers any manufacturing
defects in materials or workmanship when used under normal use conditions and
in compliance with the stipulations in the instruction manual and warranty
guidelines.
The warranty does not cover wear, and tear or parts deemed to be wearing parts
such as but not limited to bearings, brakes, wheels, grip tape, or folding
mechanisms. The warranty does not cover cosmetic parts or parts deemed as
cosmetic parts such as but is not limited to paint, stickers and labels. The
warranty does not cover the loss of parts. Spare parts may be available for
purchase from Zinc Sports if you are not covered by the warranty. Under no
circumstance will Zinc Sports be obliged to provide compensation for bodily
injuries, death, property damages, losses, hindrance of profits, prevention of
use, or any other damage that will be caused directly or indirectly as a
result of usage of this device. Zinc Sports advise that you contact your
insurance company to determine whether coverage is provided for the use of
this scooter, or to take out a new policy. For the full warranty policy please
visit our website at www.zincsports.com
CUSTOMER HELPLINE
Hy-Pro advises you to contact us directly and not to return this item to the
place of purchase. Hy-Pro has taken great care to ensure this item has reached
you in good condition, should you have a query please ring our helpline at +44
(0) 800 731 0006 where your call will be dealt with promptly.
Alternatively please contact us by email:
[email protected]
PRODUCT CODE: ZC06907 STUNT SCOOTER – VOID YELLOW
Hy-Pro House, Centers Park
Arenson Way, Dunstable,
Bedfordshire LU5 5BN.
United Kingdom
Hy-Pro Asia Room 1011, 10/F, Peninsula Centre,
67 Mody Road, Kowloon, Hong Kong.| Hy-Pro Europe
Cube Building, Monahan Road,
Cork, T12H1XY, Republic Of Ireland.
Customer Care Line
Tel: +44 (0) 800 731 0006
www.hy-pro.co.uk
www.zincsports.com
---|---
Documents / Resources
| ZINC
8625250 Stunt Scooter
Void
[pdf] Instruction Manual
8625250, Stunt Scooter Void, 8625250 Stunt Scooter Void, Scooter Void, Void
---|---