MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker User Manual

June 16, 2024
Monster

SOLAR
INDOOR/OUTDOOR WIRELESS
SOLAR POWERED SPEAKER
USER MANUALMONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered
Speaker

SOLARX HIGHLIGHTS

MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker -
HIGHLIGHTS

PACKAGE CONTENTS

MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker -
PACKAGE

If any items are missing, contact our customer service team at 1-800-976-0677.

MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker -
CONTROLS

LED INDICATORS

GETTING STARTED – CHARGING THE SPEAKER

BEFORE FIRST USE:
Charge the unit for 6.5 hours
Connect the speaker to a
power outlet to start charging.
Battery charging status
Red LED Solid / Solid / The First 3 seconds of Powere On
Battery Red LED slow flash method / (0.5Hz)
Battery work at charging mode.
Battery Red fast flash (4Hz) Battery level is less than 15% capacity.
Red LED Solid is on / Solid / Battery is fully charged.

  1. Please connect the USB-type C cable for Power.
  2. Plug the USB-type-c cable with a Plug ( not included) into a wall outlet.
  3. Press the Power button (ON)
  4. Monster SolarX will enter Bluetooth
  5. Pairing mode automatically.
  6. Pair with your Bluetooth device
    MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker - CHARGING
2

LED COLOR FUNCTION

CHANGING COLORS
Short Press the Color/Indicator button to cycle through the preset colors: Solid Colors, Breathing color, Chrome color, Music mode, Red, Green , Blue, Yellow , Purple, Cyan, White color.

Color/TIMER
When green indicator is OFF means auto mode timer is OFF.
When green indicator is ON means auto mode timer is ON.
NOTE: When light is OFF , press the key to turn light ON.

AUTO MODE
Auto Mode will be enable/disabled when light sensor in solar panel detects change from day to night or night to day.
Day Time (AUTO MODE ON)
day time, unless user input changes light brightness, color, or enables timer.
Night Time (AUTO MODE ON) : Lights will remain on durring night time to the white light.
Press and hold 3s to disable the AUTO MODE The light will not auto light up at the night time.MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered
Speaker - FUNCTION

BLUETOOTH CONNECTION

  1. Set the speaker source to Bluetooth (unpaired). Blue LED will flash.
  2. Make sure the Bluetooth function is enabled on your device.
  3. Place the Bluetooth device and speaker within pairing distance (~1 meter).
  4. Press and hold the Bluetooth button for 3 seconds to enter pairing mode (BLUE LED will flash fast).
  5. Search for Bluetooth connections on your device. Select “Monster SolarX.”
  6. The speaker will confirm connection with an audible message (BLUE LED will turn solid).

MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker -
CONNECTION

EZ PLAY 2 Wireless Connection

MONSTER MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker -
Connection 2

(Additional Speakers Sold Separately)

Step 1
Long press the “Power” key for 2 seconds to power on Master Speaker (Speaker A), Speaker A works at BT pairing mode and BT Blue LED fast flashes if nothing has been paired with, Speaker A auto reconnects to last connected mobile device if it has been paired with. MONSTER MNSOLX-BLK Indoor Outdoor
Wireless Solar Powered Speaker - Connection 3

Step 2
Open the Bluetooth section of the device (e.g, mobile phone), search and connect the Monster SolarX
Step 3
Press “ ” key once on the Master Speaker (Speaker A), it enters into EZ Play 2 mode, the White LED lights solid and the speaker will say “Tone” MONSTER
MNSOLX-BLK Indoor Outdoor Wireless Solar Powered Speaker - Connection
4

Step 4
Long press the “Power” key for 2 seconds to power on slave Speaker (Speaker B), After the “ ” key is pressed, the orange indicator of the B speaker blinks. When the connection is successful, the orange indicator is solid and the speaker will say “Connected ” (Speaker B) receives the signal from (Speaker A) and plays the same sound as (Speaker A).
Step 5
All (Speaker B,C,D,E…) and other slave Speaker(s) can enter the EZ Play 2 listening mode of the slave unit by performing steps 4 above, and play the audio from the main unit.
Remarks:

  1. Speakers B, C, D, E… need to be working in Bluetooth paring mode; if Speakers B, C, D, E… are not in working Bluetooth connecting mode, press and hold “BT” key for 3 seconds to enter pairing mode.
  2. Adjust the Volume control on the master speaker, in the same group speakers will sync the volume changing, If you adjust the volume on any slave speaker, you only change the volume in that speaker.

SPECIFICATIONS

General

Input(s)| Bluetooth 5.3 | EZ-Play2 | USB (5V/ 2A)
---|---
Buttons| Power  | Bluetooth | EZ-PLAY 2 | Color | Volume Down / Up
LED Indicators| Transmit (TX) (White) | Receive (RX) (Amber) |
Bluetooth (Blue) | Timer (Green x1)| Power (Red)
Power Input – Output| 5V/2A-5V1A
Power Saving| Auto Standby after 15 mins.
Max music power| 30W
Drive(s)| 3.5” Full Range (x4) | 6.5” Passive Radiator (x1)
THD + Noise| 75dB
Cabinet Material| Plastic / Silicon
Dimensions (L x W x H)| 9.4” x 9.4” x 12.5”
Weight| 9 Lbs / 4 kg

Operating Temperature

Operating Temperature Range 0°C – 40°C
Operating Humidity Range 40~90% RH
Storage Temperature Range -25°C to 70°C

IMPORTANT SAFETY INSTRUCTIONS

  1. Read all instructions and save them for personal reference in the future.

  2. Follow all directions for operating the product.

  3. Heed all warnings on the product and in the operation instructions.

  4. Clean with a dry cloth only. Always unplug the product from any power source before cleaning.

  5. Do not use third-party attachments or non-recommended accessories with this product.

  6. Do not place product on an unstable surface, such as a cart, stand, tripod, table, etc.
    Unstable surfaces may cause the product to fall and cause serious injury to people and serious damage to the product. Follow all manufacturer instructions for mounting and accessories.

  7. Do not block or cover ventilation slots. Openings in the product cabin ensure reliable operation and prevent overheating. Avoid placing on beds, sofas, and rugs, or mounting on racks or bookcases, unless proper ventilation is  provided.

  8. Do not use plug incorrectly. The product may come with a polarized, alternating-current line plug (one blade is wider/larger than the other). This is a safety feature: the plug will only go into outlet receptacles one way. Do not force  the plug. If the plug does not fit, contact your electrician to re place the outlet.

  9. Prevent power cord hazards. Route cords to avoid walking on them or pinching them, especially at plug ends and connection points to the product & power outlets.

  10. Unplug power cord when not in use. The product should not be plugged into a power source when not in use for long periods of time.

  11. Do not use this product near bodies of water. The product is not waterproof and cannot be fully sub merged in water. Power cords and electric currents should never be exposed to water.

  12. Do not set up near heat sources. Avoid radiators, stoves, heat registers, amplifiers, and other devices that produce heat. Avoid long exposure to sunlight and high temperatures.

  13. Refer all service to qualified personnel. If the product becomes damaged during use or encounters a malfunction, contact qualified service personnel. Do not attempt to service yourself.

  14. To use wirelessly, disconnect AC plug completely. The plug must be completed disconnected from the power outlet.

  15. Do not stand, sit, jump or strike the Solara with sharp objects. The product may break and not function.

  16. Solar panel must be cleared of dust, leaves and water to achieve maximum power conversion. Avoid using cleaning materials and manually dissecting parts.

  17. Solar panel may be hot when sitting under sun, please use caution when touching.

HELP & TROUBLESHOOTING

No power / Will not turn on Plug into a power source and charge the speaker.
No sound playing  Increase the volume on source device, press Volume Up (+).

Ensure device is not muted.
Increase the volume on speaker, press Volume Up (+).
Ensure speaker is properly paired with the source device.
Press on Bluetooth button on speaker.
If source device is outside Bluetooth range move speaker closer.
Smartphone / Tablet remote
app isn’t working| Ensure phone or tablet is properly paired with the SolarX speaker.
LED button is flashing red| Please charge by plugging directly into wall outlet. Ensure that charging cable is not damaged.

For additional help please contact our support team at:

Telephone: 1-800-976-0677
Email: support@mymonsteraudio.com

 A lightning flash and arrowhead within an equilateral triangle denotes the presence of insulated “dangerous voltage” within the product’s enclosure. The voltage may be of sufficient magnitude to constitute a risk of electric shock to persons who come into contact with it.
An exclamation point within an equilateral triangle denotes the presence of important operation & maintenance/service instructions.

WARNING
Prevent fire and shock hazards. Do not use extension
cords or outlets that expose plug blades. Do not expose cables and plugs to rain or moisture.
Do not attempt to perform any servicing that is not included in the operating instructions. Do not attempt to replace the battery, as incorrect installation can cause fire or explosion. For service, contact qualified service personnel.
Do not remove cover or back of product. There are no user-serviceable parts inside. Attempting to modify controls or performance beyond manufacturer specifications may result in hazardous exposure to radiation.

LIMITED WARRANTY

Model: MNSOLX-BLK
This Monster-branded product, marketed as new, in the original carton to the original purchaser (“Product”), is warranted by Russell Distribution Company, LLC against manufacturing defects in materials and workmanship for a limited warranty period of Ninety (90) Days for Labor and One (1) year for Parts. This Limited Warranty is conditioned upon proper use of Product by you, the Purchaser.
This Limited Warranty does not apply to store display products and product sold as a ‘marked down” special, in as is condition, ‘close outs”, “liquidation and clearance sales”, “open box”, products missing accessories, or no fault found.
Proof of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is within the limited warranty period. The Bill of Sale, Receipt or Receipted Invoice must be presented as a pre-condition to obtaining the  limited warranty service.
This limited warranty begins on the original date of purchase and is valid only on Products purchased through authorized dealers and used In the United States, and Puerto Rico, by the original Purchaser. To receive waranty service, the  Purchaser must first contact us for problem determination and service procedures. The original dated bill of sale, receipt or receipted invoice must be presented upon request as proof of purchase.
We will repair your product or if repairs cannot be made, we will replace it at no charge with the same or similar product. If the Product is defective as specified in this limited warranty during the limited warranty period, we may use new  or remanufactured parts to repair the Product. All replaced parts and products become our property and must be returned to us. Replacement parts and products assume the remaining original limited warranty, or ninety (90) days, whichever is longer.
Product freight must be prepaid by you, the original Purchaser and shipped in either its original packaging or packaging affording an equal degree of protection. We will not be responsible for or obligated to replace damaged Products.
If the Product is received damaged, it is your responsibility as the consumer to file a claim against the carrier. We will only store the damaged Product for 30 days and reserve the right, in our sole discretion, to dispose of the damaged  Product or ship it back to you at your expense after 30 days.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement noncommercial use of this Product, and shall not  apply to the following, including, but not limited to: Damage which occurs in shipment: delivery and installation; applications and uses for which this Product was not intended; altered Product or serial numbers; cosmetic damage or  exterior finish: accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems.utilities, services, hardware, supplies, accessories, applications, installations, repairs, external wiring or  connectors not supplied or authorized by us or the manufacturer, which damage this Product result in service problems: incorrect electrical line voltage, fluctuations and surges: customer adjustments and failure to follow operating  instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery  problems; burned-in images. Uninterrupted or error-free operation of the Product is not warranted.
THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, ANDNO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  WARRANTIES OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE, SHALL APPLYAFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN  BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS

DISPUTES

Model: MNSOLX-BLK
ALL DISPUTES ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE SALE, CONDITION OR PERFORMANCE OF THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND NOT BY A COURT OR JURY.
Any such dispute shall not be combined or consolidated with a dispute involving any other person’s or entity’s Product or claim, and specifically,without limitation of the foregoing, shall not under any circumstances proceed as part of a  class action.
The arbitration shall be conducted before a single arbitrator, whose award may not exceed, in form or amount, the relief allowed by the applicable law. The arbitration shall be conducted by the American  Arbitration Association (AAA) pursuant to its Consumer Arbitration Rules (AAA Rules). The Federal Arbitration Act governs this provision.
The arbitrator shall decide all issues of interpretation and application of this arbitration provision and the Limited Warranty.
For any arbitration in which your total damage claims, exclusive of attorney fees and expert witness fees, are $5,000.00 or less (“Small  Claim”), the arbitrator may, if you prevail, award your reasonable attorney fees, expert witness fees  and costs as part of any award, but may not grant its attorney fees, expert witness fees or costs unless it is determined that the claim was brought in bad faith. In a Small Claim case, you shall be required to pay no more than half of the  total administrative, facility and arbitrator fees, or $50.00 of such fees, whichever is less, and Russell Distribution Company, LLC shall pay the remainder of such fees. Administrative, facility and arbitrator fees for arbitrations in which  your total damage claims, exclusive of attorney fees and expert witness fees, exceed $5,000.00 (“Large Claim”) shall be determined according to AAA Rules. In a Large Claim case, the arbitrator may grant to the prevailing party, or  apportion among the parties, reasonable attorney fees, expert witness fees and costs.
Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction.

This arbitration provision also applies to claims by you, the purchaser of the Product, and all those in privity with you, including your family members, beneficiaries and assigns, against Russell Distribution Company, LLC’s parent(s),  subsidiaries and affliates, any person or  entity that licensed, supplied, sold or distributed the Product, and each of their offcers, employees, representatives, licensors/licensees, agents, beneficiaries, predecessors in interest, successors,  and/or assigns.
You may opt out of this dispute resolution procedure by providing notice to Russell Distribution Company, LLC no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the Product. To opt out, you must send notice by e-mail to Russell Distribution Company, LLC at support@mymonsteraudio.com, with the subject line: “Arbitration Opt Out.” You must include in the opt out e-mail (a) your name and address; (b) the date on which the  Product was purchased; (c) the Product model name or model number; and (d) the IMEI or MEID or Serial Number if applicable, if you have it. Alternatively, you may opt  out by calling 1-800-976-0677 no later than 30 calendar days  from the date of the first consumer purchaser’s purchase of the Product and providing the same information. These are the only two forms of notice that will be effective to opt out of this dispute resolution procedure.
Opting out of this dispute resolution procedure will not affect the  coverage of the Limited Warranty in any way, and you will continue to enjoy the benefits of the Limited Warranty.

To obtain warranty service,
please contact technical support with questions
Phone: 1-800-976-0877 Email: support@mymonsteraudio.com
Do not return this product to the store. Visit: MyMonsterAudio.con

FCC WARNING STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with  the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television  reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part  of your body.

RF EXPOSURE STATEMENT

This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

IC WARNING STATEMENT
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

MUSIC WITHOUT LIMITS
Monster and the Monster logo are registered trademarks of Monster Inc., and its subsidiaries in the U.S. and other countries, used under license.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Printed in China

CALIFORNIA PROPOSITION
65 WARNING
WARNING: This product can expose you to chemicals including Lead and Lead
Compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to:
www.Pé65Warnings.ca.gov.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals