Bailey Smart LED Light String Instruction Manual
- June 16, 2024
- Bailey
Table of Contents
Bailey Smart LED Light String Instruction Manual
145600
- Power consumption: 12W
- Input voltage: 220-240V AC
- Output voltage: 12V DC
- WIFI + Bluetooth
- RGB + 2700-6500K
- IP44
Warning – Caution – Safety – Environment
(1) Before installation please read the specifications to make sure that this product is suitable for the operating environment. (2) Make sure the supply voltage is the same as the rated lamp voltage. (3) All safety instruction must be followed to avoid a risk of injury or property damage. (4) Suitable for outdoor use. (5) Do not attach other items to the product. Only use the product when it is working perfectly. Store and install the product out of the reach of children. (6) Keep away from flammable materials. (7) The cable can’t be replaced, avoid damage to insulation during installation. (8) Lights string is not likeable. (9) LED light source is not replaceable. (10) Don’t mount the light string with sockets facing upward. (11) Electrical products may not be disposed of in the same way as normal household waste. Take the fixture to a place where it can be recycled.
CONTROLLER
Click once to switch the mode or turn on the light, twice to turn off the light, long press for 5 seconds to network connection mode (red light flashing).
APP CONNECTION
- **Download Tuya Smart or Smart Life APP
Tuya Smart APP
Smart Life APP
**
-
Register and login
-
Connect device to network
Make sure the mobile phone is connected to 2.4GHz Wifi network, turn on 4G mobile data, Bluetooth and mobile phone GPS at the same time. Long press the controller button for 5 seconds and configure the network when the red light flashes. If the device fails to configure the network for over 3 minutes, it will automatically enter the constant light mode. -
Method 1: automatically search for device (recommended)
The APP home page interface will automatically pop up (Find the devices to be added). Click Add or + icon on the upper right corner to choose “Add Device” and enter the Add Device interface.
Select 2.4GHz wireless network, enter password for this WIFI network and click next
Added successfully when “√” appears and the light stops flashing
-
Method 2: manually add device (must be in network configuration mode)
Click + icon on the upper right corner, choose “Add Device” and enter the “Add Device” interface. Click “Lighting” and then “Light Source (BLE+Wi-Fi)”.
Continue to configure the network, click Next.
Select the status of the indicator light
Select 2.4GHz wireless network, enter password and click next
Continue to select Add
Added successfully when “√” appears and the light stops flashing
- When using Bluetooth control, the router needs to be disconnected for about 3 minutes to connect.
APP OPPERATION
Set the number of LED bulbs
Colour interface
User can turn of selected LED bulbs
Select colour for each LED bulb
White light interface
Music mode
The light follow the music collected by the phone microphone.
Scene mode
Click … to set the mode
Timer mode
Click the writing icon for voice control
Share Device and Create Group functions
REMOVE DEVICE
Method 1: long press the device, enter interface, press Remove Device
Method 1: long press the device, enter interface, press Remove Device
RENAME DEVICE
**Method 1: Click the writing icon to rename after adding the device.
**
**Method 2: Rename device in control interface.
**
Bailey Electric & Electronics bv
Everdenberg 21 4902 TT Oosterhout Netherlands
+31 (0)162 52 2446
www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>