LASER LSH-PLGPM-001 Smart Plug With Energy Monitor and Wifi User Manual

User Manual
Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au Smart Wi-Fi Plug
with Power Monitoring
LSH-PLGPM-001

What’s In The Box

• Smart Plug
• User Manual

Specifications

Resistive load
Wi-Fi:| Wi-Fi 802.11 b/g/n
Wi-Fi Frequency:| 2.4GHz
Security:| WAP/WAP2
Encryption Type:| WEP/TKIP/AES
Working Consumption:| <0.9W
Standby Consumption:| <0.6W
Working Temperature:| -20°C – 50°C, < 80% Humidity
Storage Temperature:| -20°C – 60°C, < 80% Humidity
Weight:| 70g
Dimensions:| 66 x 43.5 x 57.5mm

Product Diagram

Power & Pairing Button Controls

• Press and hold the pairing button for 5 seconds.
• ALED indicator light will start flashing.

There are 2 flashing states:

• Fast Flashing = EZ pairing mode.
• Slow Flashing = AP pairing mode.

Note: In this manual we cover the EZ pairing mode instructions.

Getting Started with the App

1. Install the Laser SmartHome App for your Smartphone from the iOS App Store or Google Play.https://smartapp.tuya.com/lasersmarthome
2. Log in with an existing Laser SmartHome account or create a new account.

Connecting to the App

1. Turn on the Bluetooth function on your Smartphone.
2. Press and hold the Pairing Button on the smart plug for 5 seconds till you get a fast-flashing indicator light.
3. Open the Laser SmartHome App and tap the “+” icon to add a device.
4. The smart plug icon should appear. Select “Add” under “Discovering Devices”.
5. Enter your Wi-Fi details.
6. Tap the “+” icon next to the smart plug
7. When finished pairing tap “Done”, then the device will appear on the Laser SmartHome App home screen.

NOTE: If you are unable to pair successfully with the smart plug, please check your Wi-Fi password and make sure you are only using a 2.4GHz Wi-Fi connection. 5GHz connections are not supported.

Using the Plug

Adding Laser SmartHome to the Google Home App

• Open the Google Home App.

• In the “Google Home” main screen, select the
  “+” icon to set up device.

• Select “Set up device” to add new device, then select “Works with Google’.

• A list will appear showing actions and a search function to access more apps: from here, search for the Laser SmartHome App.

• Log into your
  Laser SmartHome account with your email address.

• Once linked, it will show the devices linked to your account: you can assign them to rooms. You will be prompted to authorize apps to sync.

• Click “Done” and then it will give you a list of commands available.

• When successfully linked, you will see the smart plug on your “Home Control” screen.

Troubleshooting

The Smart Plug is not connecting to the App.

• Check your Wi-Fi username and password are correct.
• Make sure you are only using a 2.4GHz Wi-Fi connection as the 5GHz band is not supported.
• If you are unsuccessfully connecting using Bluetooth with EZ Mode. Switch the pairing mode to “AP Mode” by pressing and holding the Pairing Button for 5 seconds till you get a slow flashing light. On the app select the + icon to add device, select the Electrical category, then select Socket (Wi-Fi). Enter you Wi-Fi credentials then on the next screen in the top right change the selection from EZ Mode to AP Mode. Follow the remaining instructions outlined in the app to connect via AP Mode.

I cannot see any Power Monitoring data.

• Check you have a device connected to the smart plug and that it has been switched on.
• Power usage data take 12 — 24 hours to display in the app. You may need to leave your device running longer for the data to update in the app.

My device is turned on but not showing any signs of power.

• Check the power is switched on in the app.
• Check your mobile phone has a network or data connection and that it can connect to the internet.
• Check any individual power switches or overload switches on connected devices.

Thank you for Your purchkase!
We are 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:

https://www.laserco.com.au/support

References

• Reduction Revolution - Energy Efficiency Made Easy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>