VIGO PRD901 Round Shower Swing Doors Installation Guide
- June 16, 2024
- VIGO
Table of Contents
- VIGO PRD901 Round Shower Swing Doors Installation Guide
- TOOL LIST
- Packaging contents
- INSTALLATIONSANLEITUNG
- Schritt 1
- Schritt 4
- Schritt 5
- Schritt 6
- Schritt 7
- Schritt 8
- Schritt 9
- Schritt 10
- Schritt 11
- Schritt 12
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VIGO PRD901 Round Shower Swing Doors Installation Guide
Prior to installation please carefully examine shower enclosure for transport
or other damage. Thorough examination of all glass parts is essential for your
own safety. Seemingly minor damage may cause breakage of glass and for this
reason, extra care must be taken not to damage the glass edges of the shower
enclosure during installation or use of the shower enclosure. Claims for
transport damage after installation and claims for damage or cost caused by
incorrect installation, cleaning and maintenance will not be paid. Personal
protective equipment recommended !
Shower enclosures are intended for installation on shower trays. If installing
without ashower tray, the floor on which the shower enclosure will rest must
be flat and level If installing on a joint or uneven surface, you must ensure
this is properly siliconed to form a waterproof and maintenance-free seal.
When assembled off-floor or with a step, you must take appropriate measures to
prevent slip hazards on entry and exit. Before drilling the raw plug holes,
the wall has to be tested for concealed service pipes (electricity-, gas- or
water pipes). Drilling into these pipes is a life threatening hazard as well
as damage to property. Shower enclosures should be installed on solid walls
and bases. If installing on non-solid walls and bases, you must ensure
appropriate stability on site (e.g. by using special raw plugs). Please use
adequate and correct silicone appropriate for the installation (e.g. for
marble)
TOOL LIST
Packaging contents
- 2x Wandprofil Abdeckkappe L&R
- 2x Stabilisationsstange
- 2x Vertikalesprofil Abdeckkappe
- 4x Flachkopfschraube ST 4×30
- 2x Wandprofil
- 16 Dubel
- 8x Rundkopfschraube ST 4×30
- 2x Festteil
- 2x Tur Glasscheibe
- 2x Magnetdichtung
- 12x Schrauben Abdeckkappe
INSTALLATIONSANLEITUNG
Falls Sie Hilfe benétigen, empfehlen wir lhnen, sich an einen kompetenten
Sanitérinstallateur zu wenden.
Schritt 1
Schritt 3
Schritt 4
Schritt 5
Schritt 6
Schritt 7
Schritt 8
Schritt 9
Schritt 10
Schritt 11
Schritt 12
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>