Danby Stacking Kit Installation Guide
- June 16, 2024
- Danby
Table of Contents
Stacking Kit Guide
Stacking Kit
Note: The stacking kit MUST be used if you decide to stack these units to prevent any accident.
- Place the washing machine in the desired location. Position the wall mount unit and mark, with a pencil, the exact location where you want the wall mount to be fixed to the wall.
- Drill the mounting holes into the wall at the desired location.
- Add the E anchors and fix the wall mount to the wall with the provided F screws to secure in place.
- Align stacking kit on top of washer.
- Adjust the washer legs so unit is level.
- Fasten stacking kit to washer with G screws.
- When placing the dryer on top of the stacking kit, make sure to align the dryer feet with the stacking kit holes. Place the dryer, then slide the unit forward to lock it in place. The washer, stacking kit, and dryer should be perfectly aligned.”
- Fasten dryer to stacking kit with H screws.
- Push the complete unit so the back is against a wall.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>