Action Machine N3-3-5431X Transmission Slip Yoke Identifier User Guide
- June 16, 2024
- Action Machine
Table of Contents
Action Machine N3-3-5431X Transmission Slip Yoke Identifier
Dimension
OUTSIDE SNAP RING
COMMON U-JOINT SIZES AND SERIES
SERIES
| WIDTH (F)|
CAP DIA. (E)
---|---|---
1210| 2 7/16”| = 2.438| 1 1/16” = 1.063
1310| 3 7/32”| = 3.219| 1 1/16” = 1.063
1310 Ford| 3 7/32”| = 3.219| 1 1/8” = 1.125
1330| 3 5/8”| = 3.625| 1 1/16” = 1.063
1330 Ford| 3 5/8”| = 3.625| 1 1/8” = 1.125
1350| 3 5/8”| = 3.625| 1 3/16” = 1.188
1410| 4 3/16”| = 4.188| 1 3/16” = 1.188
1415| | 4.178| 1 3/16” = 1.188
1480| 4 3/16”| = 4.188| 1 3/8” = 1.375
1485| | 4.178| 1 3/8” = 1.375
1550
1555****
| 4 31/32” = 4.969
4.964
| 1 3/8”
1 3/8”
| = 1.375
= 1.375
INSIDE SNAP RING
COMMON U-JOINT SIZES AND SERIES
SERIES
| WIDTH (F)|
CAP DIA. (E)
---|---|---
7260 Chrysler| 2 1/8” = 2.125| 1 5/64” = 1.078
7290 Chrysler| 2 5/8” = 2.625| 1 1/8” = 1.125
3R GM| 2 9/16” = 2.563| 1 1/8” = 1.125
Please Note:
- Measure the major diameter (deepest part) inside the slip yoke.
- Some slip-yokes have blank spaces called blind spots. Count each blind spot as one spline.
- 1310 Ford & 1330 Ford have a 1 1/8” cap at the pinion yoke and a 1 1/16” cap at the driveshaft.
- 1415, 1485, and 1555 were only found on Chrysler and some GM vehicles with American Axle-built driveshafts.
Helpful Resources
TRANSMISSION SLIP YOKE IDENTIFIER
574-287-9650 | South Bend, IN
www.ActionMachineInc.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>