Walmart H21014-80 TV Stand with 36 Inch Electric Fireplace Instruction Manual
- August 17, 2024
- Walmart
Table of Contents
Walmart H21014-80 TV Stand with 36 Inch Electric Fireplace I
Specifications
- Model : 574UBOE
- Features : OEP PS’ VS OJUVS F
Product Information
The 574UBOE is a versatile product designed to provide efficient performance in various settings. With its unique features and robust construction, it ensures reliability and ease of use.
Usage Instructions
Setup and Installation:
Before using the product, carefully unpack all components and read the user
manual thoroughly. Follow the step-by-step instructions for proper setup and
installation.
Powering On:
Connect the product to a power source using the provided cable. Press the
power button to turn on the device. Wait for the initialization process to
complete.
Product Operation:
Once powered on, familiarize yourself with the product controls and
interface. Use the included remote or buttons to navigate through different
settings and functions.
Maintenance and Care:
Regularly clean the product using a soft, dry cloth to remove dust and
debris. Avoid using harsh chemicals or abrasive materials that may damage the
surface.
Indoor Furniture
We are a professional furniture provider with top-notch factories and
outstanding designs, Our mission is to provide consumers with new lifestyles.
By collecting consumer feedback, we constantly improve our products and create
more choices for consumers. If you want to create your space, We are an ideal
choice.
Always
WARNING
All the TV Stands have passed strict quality inspections before delivery. Read
this manual carefully to ensure proper usage Ensure that all parts and
hardware are available before beginning assembly
NOTICE
- Children are not allowed to operate.
- Faster installation is possible with power tools.
- Do not pull the door vigorously to prevent the storage cabinet from tipping over.
- Please attach the storage cabinet to the wall with an anti-tip device after installation is complete.
- When using the storage cabinet for the first time, please keep it in a ventilated environment to allow the smell to fully evaporate.
- When placing the partitions, please make sure the nails are firmly installed to prevent the partitions from falling off.
- If any parts are missing, broken, damaged or worn, discontinue use of the product until repairs are made and/or factory replacement parts are installed.
- Do not use this product in a manner inconsistent with the manufacturer’s instructions, as this may void the product warranty.
- If accessories are missing, please contact customer service for communication in time, we provide 7×24 hours customer care.
- Do not use any attachments or accessories other than the original factory attachments and accessories.
- Do not alter this equipment. Any alteration will create a safety hazard.
WARNING
The product must be assembled by adult before use. Serious or fatal injury may
occur from unexpected assembly or use.
- During the assembly process, keep all parts away from babies or children.
- Always securely fix this product to the wall. Make sure the wall area to be drilled is free from hidden electrical wires, water and gas pipes.
- Use of tip-over restraints may only reduce, but not eliminate the risk of tip-over.
- Unless specially designed to accommodate, do not set heavy objects on top of this product.
- Place the heaviest items on the lowest shelf.
- Never allow children to climb or bang on drawers, doors or shelves.
Tools Required
Phillips Screwdriver
- 2 Persons Assembly
- Up to 30 Minutes For Assembly
Parts
HARDWARE
Product Assembly
-
Use 2 wooden dowel “A” to connect part 11 and part 12.
-
Secure 4 cam bolt “C” into two part 11, 12 with Philips head screwdriver as per diagram. Note : If the white p la stic is not pressed into the a vaila ble tools can be gently knocked down.
-
- Use 3 wooden dowel “A” to connect part 4 and part 5.
-
Use 2 wooden dowel ” I ” to connect part 4 and part 5.
-
Secure 8 cam bolt “C” into part 4,5 with Philips head screwdriver as per diagram.
-
Use 8 cam lock “B” secure the Installed part 4,5 and turn the screws clockwise.
-
Use 10 cam bolt “C” into part 4,5 and turn the screws clockwise.
-
Use 2 wooden dowel “A” to connect part 8 and part 14.
-
Install 10 wooden dowels “A” and 10 cam lock “B” on the corresponding holes of the part as per the diagram.
Note : Please don’t misplace parts 4 and 5. -
Push part 15 along the slot to the end.
-
Use 3 wooden dowels “A” to connect part 2 and part 3.
-
Use 2 wooden dowels ” I” to connect part 2 and part 3.
-
Use 10 cam bolt “C” into part 2,3 and turn the screws clockwise
-
Use 3 wooden dowels “A” to connect part 1.
-
Use 2 wooden dowels ” I” to connect part 1.
-
Use 8 Cylinder “E” into part 1. and turn clockwise.
-
Install 8 Screws”F” on the corresponding holes of the parts as per the diagram.
-
Use 10 wooden dowels “A” and 10 cam lock “B” to attach the 2,3.
-
Push two parts 9 in the cabinet.
-
Install a pair of hinge”10″ on part I first, and then install part 10 on part 7.
When installing part 10 to part 7. first install the 4 screws in the oval hole of hinge “D” (corresponding to the four small holes of part 0).
Close part 10 to see if the position of part 10 is suitable. If not, you can adjust the screws of the oval hole of hinge”D”
After adjusting, lock the 4 round holes of hinge”D” with screws.
In the same way, install part 10 on part 6. Note : When the position of part 10 is found to be inappropriate after installation (for example, one side of the door is too large, or part 10 is scratched with other parts, etc.), you can adjust the position of the cabinet door (up, down, left and right) by screwing. -
Remove four silverscrews from the sides of the heat erm two screws on each side.
Remove two screws from the front of the eater.
Remove the tempered glass by lifting ie from the lugs on the side. -
Take the glass from the appliance first, then gently put the appliance on the TV Stand by two persons.
- Secure the fireplace after adjusting it to the proper position with the 4 screws removed earlier.
- Place the crystal stones in the groove of the fireplace.
-
Place the front glass surround over the front of the fire a align the slot in the bracket attach side ofthe glass panel with the lugs on the sides of the fire.
-
Put the light strip wire through the hole (one long wire and one short wire).
Put the long one on the side farther from the fireplace wire, and the short one on the side closer to the fireplace wire. Hold the light strip with the clip and lock the screw.
HELP CENTER
Question about your product? We’re here to help. Visit us at:
We Stands Behind the Quality of Their Furniture
If you have any issues with your item please let us know!
We will always do our best to come up with a solution that you will be happy
with. Please get in touch with our customer service team before returning the
product. And pls do not throw the original boxes) if you have not finished
assembling or confirmed no quality issues.
Length of return period:
Items can be returned within 30 days of purchase. In the meantime, everything
you purchase from us comes with a one-year warranty. Who is responsible for
the return shipping fee:
We will cover the return shipping fees if:
- Your item has a manufacturing defect in its materials or workmanship. For example, torn wicker or misaligned screw holes. We will send you a prepaid shipping label after the photos are sent.
- Your item has been damaged in transit. For example, glass is broken or the wicker is damaged. We will send you a prepaid shipping label after the photos are sent.
- You receive the wrong box(es) due to a warehouse error. We will send you a prepaid shipping label after photos are sent of the wrong SKU numbers on the outer boxes).
- One or more boxes are lost in transit. We will send you a prepaid shipping label if you no longer want the item.
*However, we still hope to work with you for a better solution instead of a return. Please don’t hesitate to contact our customer service team.
The customer will cover the return shipping fees if:
- You don’t like the products) after receiving the boxes).
- You no longer need the products) but you have received the boxes).
- You buy the products) by mistake but you have received the boxes).
- Order/Shipment cancellation failed and you have received the boxes).
Return Request
In order to get a full refund as described in this return policy, all items
must be:
- In a brand new/unused condition, please provide photos before and after packaging.
- When returning, all accessories and parts are firmly packed in all original packaging. If your return does not meet the requirements, you may not get a full refund.
When will I be refunded?
The refund is released once the goods have been returned to our warehouse.
What if the product is damaged/ defective outside of the valid return
period?
We want you to be a happy customer. Please reach out to us by email and we
will come up with a solution to make sure you are satisfied.
FAQ’s
Q: How do I troubleshoot if the product does not turn on?
A: Check the power connection and ensure it is securely plugged in. Try a
different power outlet to rule out electrical issues.
Q: Can I use third-party accessories with this product?
A: It is recommended to use only compatible accessories provided by the
manufacturer to avoid any compatibility issues.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>