BDI EBO Lift Console Table Soma Instruction Manual
- June 16, 2024
- BDi
Table of Contents
SOMA™ 1133
CONSOLE TABLE
EBO Lift Console Table Soma
INSTRUCTION MANUAL
LET’S GET STARTED.
DESIGN JEFF BARE
Congratulations on the purchase of your Soma Console Table 1133 from BDI. Your
console table has been designed to provide a lifetime of enjoyment. This
manual will provide you with assembly instructions and other helpful
information to ensure you get the most out of your product. Please save it for
future reference.
Your Soma Console Table has been engineered for simple assembly. Please follow
these directions carefully to prevent any damage.
Should you need further assistance, contact BDI at
customerservice@bdiusa.com.
ENJOY!
HARDWARE AND COMPONENTS
Unpack and identify the parts listed below. If you are missing any hardware,
please contact BDI Customer Service at customerservice@bdiusa.com. For all
other concerns, please contact your BDI retailer.
The assembly workspace should be a non-marring surface such as carpet. Do not
use power tools for the assembly of this product.
ASSEMBLY
STEP 1. DETACH SHELF & BASE FROM TOP
Place the Top Panel (C1) upside down on a soft, flat surface. Remove the 3
Silver Screws connecting the Bottom Plate (C4) with a Hex Wrench (T1). Discard
these screws.
Remove the 4 Screws (H2) connecting the Shelf (C3) to the Top Panel (C1) with
a Hex Wrench (T1). Set these screws aside for later use.
STEP 2. ATTACH LIFT COLUMN
Place the Lift Column (C2) on the Top Panel (C1) and ensure it is in the
correct orientation to allow the handset to reach the threaded holes.
Mount the Lift Column (C2) with 4 Screws (H1).
Tighten with Hex Wrench (T1). Mount the Lever with 2 Screws (H3). Tighten with
Phillips Screwdriver.
Do NOT remove the tape on Lever.
STEP 3. SECURE WIRES
Secure any wires with the adhesive backed Wire Clips (H4) where needed.
STEP 4. ATTACH SHELF
Carefully slide the Shelf (C3) over the Lift Column (C2). Attach the Shelf
(C3) with 4 Screws (H2).
Tighten with Phillips Screwdriver.
You may need to loosen the column screws and adjust its position or slide the
shelf up or down on the column to align the shelf mounting holes.
STEP 5. ATTACH BOTTOM PLATE
Attach the Bottom Plate (C4) to the Lift Column (C2) using 3 Screws (H1).
Tighten with Hex Wrench (T1).
You may need to loosen the column mounting screws and rotate it slightly to
align the base straight.
CARE & MAINTENANCE
Your BDI furniture has been constructed with the finest materials,
manufactured with care and is designed to last a lifetime. Regular care of
your furniture will prolong your enjoyment and keep it looking its best. Here
are some general tips for taking care of BDI furniture. Your surfaces may
vary.
GLASS
The glass surface is maintained using household glass cleaner and a paper
towel or cloth.
SATIN-ETCHED GLASS
This uniquely smooth-to-the-touch glass surface can be regularly maintained
using household glass cleaner and a paper towel or cloth. Minor scratches or
scuffs not eliminated using paper towel or cloth can usually be removed by
using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available at
any grocery store or home improvement center. Dampen the entire glass surface
and the Magic Eraser, then rub the entire glass surface in broad, even strokes
using moderate pressure. Clean and dry the surface with a paper towel. Check
for results and repeat as necessary.
Any scratches or scuffing not eliminated by one of the above methods can often
be addressed by ‘refreshing’ the glass. This is a process that should not be
required more than once per 6-12 months.
See this brief video for the simple method: www.bdiusa.com/glass
WOOD
Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or
paper towel. Do not use glass cleaner on wood. If moisture remains, dry the
surface with another cloth. If needed, a gentle non-abrasive cleanser may be
used, but be sure to wipe away all cleaner residue and dry the surface with a
cloth.
BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a
product of nature and— unlike man-made materials that can be manufactured to
strict and consistent specifications—has natural imperfections that are part
of its appeal and character. Every piece of wood differs from every other,
even when coming from the very same tree. As such, variation in grain, texture
and tone should be expected from one panel or piece of furniture to the next.
While BDI’s stained wood finishes are stable in tone & appearance, all
finishes are subject to some degree of discoloration with prolonged exposure
to direct sunlight. Please take care to avoid positioning your BDI cabinet in
any area with extensive direct sunlight. To learn more about the features of
natural wood, visit www.bdiusa.com/wood
METAL, PORCELAIN, & PAINTED SURFACES
Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper
towel. If moisture remains, dry the surface with another cloth. If needed, a
gentle non-abrasive cleanser may be used, but be sure to wipe away all cleaner
residue and dry the surface with a cloth.
WARRANTY
BDI warrants to the original purchaser that for the below-stated warranty
term, BDI will repair or replace any product, part, or component covered by
this warranty that fails under normal use as a result of a defect in material
or workmanship. BDI will repair or replace the aforementioned product, part
or component with a comparable product, part or component. The decision to
repair or replace will be at BDI’s sole discretion.
BDI furniture is warranted for three (3) years from the date of purchase as
shown on your sales receipt. The warranty period starts from the date of
purchase. This warranty extends only to the original purchasers who acquire
new products from BDI Authorized Resellers. Any product, part, or component
must have been assembled, installed, used, and maintained according to BDI’s
published instructions to be eligible for warranty coverage. Any modification
to the original product voids the warranty.
To view BDI’s complete warranty information, visit
www.bdiusa.com/warranty
PRODUCT REGISTRATION
Registering your new BDI product allows us to send you important product updates, service information, and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register
These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Soma & BDI are trademarks of Becker Designed, Inc.
All rights reserved. ©2022, BDI | V.11.21.2022
Made in China
BDIUSA.COM
References
- BDI Furniture | Designed for Modern Living
- Caring for BDI’s Satin-Etched Glass | BDI Furniture
- Register Your BDI Product | BDI Furniture
- Limited Warranty | BDI Furniture
- The Distinction, Diversity and Durability of Natural Wood | BDI Furniture
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>