BDI 1183 Cloud 9 Console Table Instruction Manual
- May 15, 2024
- BDi
Table of Contents
BDI 1183 Cloud 9 Console Table
Product Information
Specifications
- Model: Cloud 9 Console 1183
- Designer: Matthew Weatherly
- Assembly: Simple assembly required
- Materials: Glass, Wood
Product Usage Instructions
Hardware and Components
Unpack and identify the parts listed below. Ensure assembly workspace is a non-marring surface like carpet. Do not use power tools for assembly.
- T1 Hex Wrench – Quantity: 1
- H1 M6 x 16mm Screw – Quantity: 6
- H2 M6 x 12mm Screw – Quantity: 6
- C1 Top – Quantity: 1
- C2 Leg – Quantity: 1
- C3 Base – Quantity: 1
Assembly Instructions
-
Step 1. Detach Base from Top
Use the T1 Hex Wrench to unscrew the H1 Screws from the C3 Base attached to the C1 Top. Set the C3 Base aside. -
Step 2. Attach Leg
Use the T1 Hex Wrench with H2 Screws to fasten the C2 Leg to the C1 Top. -
Step 3. Attach Base
Use the T1 Hex Wrench with H1 Screws to fasten the C3 Base to the C2 Leg.
Care & Maintenance
Your BDI furniture is constructed with fine materials and designed to last. Follow these tips for care:
- Glass Surfaces: Use household glass cleaner and a paper towel. For scratches, refer to BDI’s glass refreshing process.
- Wood Surfaces: Clean with a slightly damp cloth. Avoid using glass cleaner. For tougher stains, use a gentle non-abrasive cleanser.
- Natural Imperfections: BDI’s wood finishes feature natural imperfections that add character. Expect variations in grain, texture, and tone.
FAQ
Q: What should I do if I encounter missing hardware pieces during assembly?
A: For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com for assistance.
Q: Can I use power tools for assembling the Cloud 9 Console?
A: No, do not use power tools for the assembly of this product to prevent any damage.
CLOUD 9™ 1183
DESIGN MATTHEW WEATHERLY
Congratulations on the purchase of your Cloud 9 Console 1183 from BDI. Your
console has been designed to provide a lifetime of enjoyment. This manual will
provide you with assembly instructions and other helpful information to ensure
that you get the most out of your product. Please save it for future
reference.
Your Cloud 9 Console has been engineered for simple assembly. Please follow
these directions carefully to prevent any damage.
Should you need further assistance, contact BDI at customerservice@bdiusa.com.
ENJOY!
HARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a
non-marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at
customerservice@bdiusa.com.
Do not use power tools for the assembly of this product.
For all other concerns, please contact your BDI retailer.
ASSEMBLY
STEP 1. DETACH BASE FROM TOP
Use the (T1) Hex Wrench to unscrew the 4 (H1) Screws out of the (C3) Base from
the (C1) Top.
Set the (C3) Base aside.
STEP2. ATTACH LEG
Use the (T1) Hex Wrench with 6 (H2) Screws to fasten the (C2) Leg to the (C1)
Top.
STEP 3.
ATTACH BASE
Use the (T1) Hex Wrench with 6 (H1) Screws to fasten the (C3) Base to the (C2) Leg.
CARE & MAINTENANCE
Your BDI furniture has been constructed with the finest materials, manufactured with care and is designed to last a lifetime. Regular care of your furniture will prolong your enjoyment and keep it looking its best. Here are some general tips for taking care of BDI furniture. Your surfaces may vary.
GLASS
Glass surfaces are maintained using household glass cleaner and a paper towel
or cloth.
SATIN-ETCHED GLASS
- This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available at any grocery store or home improvement center. Dampen the entire glass surface and the Magic Eraser, then rub the entire glass surface in broad, even strokes using moderate pressure. Clean and dry the surface with a paper towel. Check for results and repeat as necessary.
- Any scratches or scuffing not eliminated by one of the above methods can often be addressed by ‘refreshing’ the glass. This is a process that should not be required more than once per 6-12 months. See this brief video for the simple method: www.bdiusa.com/glass
WOOD
- Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. Do not use glass cleaner on wood. If moisture remains, dry the surface with another cloth. If needed, a gentle non-abrasive cleanser may be used, but be sure to wipe away all cleaner residue and dry the surface with a cloth.
- BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a product of nature and— unlike man-made materials that can be manufactured to strict and consistent specifications—has natural imperfections that are part of its appeal and character. Every piece of wood differs from every other, even when coming from the very same tree. As such, variation in grain, texture and tone should be expected from one panel or piece of furniture to the next.
- While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some degree of discoloration with prolonged exposure to direct sunlight. Please take care to avoid positioning your BDI cabinet in any area with extensive direct sunlight. To learn more about the features of natural wood, visit www.bdiusa.com/wood
METAL, PORCELAIN, & PAINTED SURFACES
Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper
towel. If moisture remains, dry the surface with another cloth. If needed, a
gentle non-abrasive cleanser may be used, but be sure to wipe away all cleaner
residue and dry the surface with a cloth.
WARRANTY
- BDI warrants to the original purchaser that for the below-stated warranty term, BDI will replace any product, part, or component covered by this warranty that fails under normal use as a result of a defect in material or workmanship.
- The decision to replace a complete product versus the part or component in question will be at BDI’s sole discretion.
- Residential Use: BDI Furnishings carry warranty coverage for three (3) years from the date of product delivery, as shown on your sales receipt/documentation. Select chairs carry coverage for five (5) years from the date of product delivery.
- Commercial Use: BDI Furnishings carry warranty coverage for one (1) year from the date of product delivery, as shown on your sales receipt/documentation. Select chairs carry coverage for five (5) years from the date of the product delivery, based on an 8-hour daily use pattern.
- BDI reserves the right to refine or update its warranty from time to time. See the complete and latest warranty document at www.bdiusa.com/warranty.
PRODUCT REGISTRATION
Registering your new BDI product allows us to send you important product updates, service information, and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws. Cloud 9 & BDI are trademarks of
Becker Designed, Inc. All rights reserved. ©2024, BDI | V.03.06.2024
Made in Turkey.
NEED ASSISTANCE? customerservice@bdiusa.com
References
- BDI Furniture | Designed for Modern Living
- Caring for BDI’s Satin-Etched Glass | BDI Furniture
- Register Your BDI Product | BDI Furniture
- Limited Warranty | BDI Furniture
- The Distinction, Diversity and Durability of Natural Wood | BDI Furniture
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>