BDI 8477 Modern Media Plus Storage Console Instruction Manual
- June 1, 2024
- BDi
Table of Contents
BDI 8477 Modern Media Plus Storage Console
Specifications
- Model: PROFILETM 8477 & 8479
- Designer: Matthew Weatherly
- Tools required: Phillips Head Screwdriver (T1), 4mm Hex Key Wrench (T2)
- Components: Shelf Pin (H1), Cabinet (C1), Center Shelf (C2), Side Shelf (C3)
Product Usage Instructions
Assembly
Step 1. Position and Level the Cabinet
- Carefully move the cabinet into its final position with the help of another person.
- Use a level on top of the cabinet and adjust the levelers using the 4mm Hex Key Wrench to ensure the cabinet is level.
Step 2. Install Glass Shelf
- Thread the Adjustable Shelf Pins at the desired height.
- Install the Glass Shelves by tilting them to clear the opening and carefully rest them into position.
Fine Tuning
Adjust Door Hinges (If Needed)
- Ensure the doors are evenly spaced and open/close freely without rubbing against the frame.
- Use a Phillips screwdriver to adjust the hinges left/right, up/down, and in/out as needed to align the doors perfectly.
FAQ
-
Q: What should I do if I am missing hardware pieces?
A: Contact BDI Customer Service at customerservice@bdiusa.com for assistance in obtaining the missing hardware. -
Q: Can I use power tools for assembly?
A: Do not use power tools for the assembly of this product to prevent damage.
Congratulations on the purchase of your Profile cabinet from BDI. Your cabinet
has been designed to provide a lifetime of enjoyment. This manual will provide
assembly instructions and other helpful information to ensure you get the most
out of your product. Please save it for future reference.
Your Profile has been engineered for simple assembly. Please follow these
directions carefully to prevent any damage.
Should you need further assistance, contact BDI at
customerservice@bdiusa.com.
ENJOY!
HARDWARE AND COMPONENTS
ASSEMBLY
STEP 1. POSITION AND LEVEL THE CABINET
With the help of another person, carefully move the cabinet into its final position.
NOTE: Your Profile is equipped with wheels to allow it to easily roll
forwards and backwards. When you are finished wiring your components and no
longer need access to the back of the cabinet, follow this step to raise your
cabinet off its wheels to level it, if desired.
Place a level (not included) on top of the cabinet and use the supplied 4mm
Hex Key Wrench (T2) to adjust the levelers from within the cabinet. Start with
the outer-most levelers until the cabinet is level, then adjust the center
front and rear levelers.
STEP 2. INSTALL GLASS SHELF
Thread the Adjustable Shelf Pins (H1) at the desired height. Install the Glass
Shelves (C2/C3) by tilting the shelf to clear the opening. Carefully rest into
position. 
In some positions it may be necessary to screw in two shelf pins into one side, rest one side of the shelf on those shelf pins while supporting the other side of the shelf and screwing in the remaining shelf pins.
FINE TUNING
ADJUST DOOR HINGES (IF NEEDED)
These steps are to be followed after you have unpacked and completed the
assembly of your cabinet. Due to jostling in freight or perhaps an uneven
floor, the doors on your cabinet may not appear to be in perfect alignment.
Making a few minor adjustments can rectify this situation.
The doors on your cabinet should be evenly spaced and the doors should open
and close freely without rubbing against the door frame. Your
cabinet’s hinges are fully adjustable, allowing you
to modify the door’s position left/right, up/down and in/out. Adjusting one
hinge can sometimes cause the need for adjustments to other elements. But with
a few adjustments, you can modify the orientation of the cabinet doors to make
sure that they hang perfectly within your cabinet.
Use a Phillips Screwdriver (T1) to adjust the door hinges:
- By adjusting Screw 1, the door will move LEFT or RIGHT within the frame. Make minor adjustments at both top and bottom hinges for best results.
- By adjusting Screw 2, the door will move UP or DOWN.
- By adjusting Screw 3 the entire door will move IN or OUT, opening or closing the gap between the door frame and cabinet. (This screw rarely needs adjustment.)
CARE & MAINTENANCE
Your BDI furniture has been constructed with the finest materials, carefully manufactured, and designed to last a lifetime. Regular furniture care will prolong your enjoyment and keep it looking its best. Here are some general tips for taking care of BDI furniture. Your surfaces may vary.
GLASS
Glass surfaces are maintained using household glass cleaner and a paper towel
or cloth.
SATIN-ETCHED GLASS
This uniquely smooth-to-the-touch glass surface can be regularly maintained
using household glass cleaner and a paper towel or cloth.
A ‘Magic Eraser’ removes minor scratches or scuffs not eliminated using a
paper towel or cloth. ‘Magic Eraser’ is a melamine foam product available at
any grocery store or home improvement center. Dampen the entire glass surface
and the Magic Eraser, then rub the whole surface in broad, even strokes using
moderate pressure. Clean and dry the surface with a paper towel. Check for
results and repeat as necessary. Any scratches or scuffing not eliminated by
one of the above methods can often be addressed by ‘refreshing’ the glass.
This process should not be required more than once per 6–12 months. See this
brief video for the simple method:
www.bdiusa.com/glass
WOOD
Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or
paper towel. Do not use glass cleaner on wood. If moisture remains, dry the
surface with another cloth. If needed, a gentle, non-abrasive cleanser may be
used, but wipe away all cleaner residue and dry the surface with a cloth.
BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a
product of nature and— unlike man-made materials that can be manufactured to
strict and consistent specifications—has natural imperfections that are part
of its appeal and character. Every piece of wood differs from every other,
even when coming from the very same tree. As such, grain, texture, and tone
variation should be expected from one panel or piece of furniture to the next.
While BDI’s stained wood finishes are stable in tone & appearance, all
finishes are subject to some degree of discoloration with prolonged exposure
to direct sunlight. Please avoid positioning your BDI cabinet in any area with
ample direct sunlight. To learn more about the features of natural wood, visit
www.bdiusa.com/wood
METAL, PORCELAIN, & PAINTED SURFACES
Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper
towel. If moisture remains, dry the surface with another cloth. If needed, a
gentle, non-abrasive cleanser may be used, but be sure to wipe away all
cleaner residue and dry the surface with a cloth.
WARRANTY
BDI warrants to the original purchaser that for the below-stated warranty
term, BDI will repair or replace any product, part, or component covered by
this warranty that fails under everyday use due to a defect in material or
workmanship. BDI will repair or replace the product mentioned above, part, or
component with a comparable product, part, or component. The decision to
repair or replace will be at BDI’s sole discretion.
BDI furniture is warranted for three (3) years from the date of purchase, as
shown on your sales receipt. The warranty period starts from the date of
purchase. This warranty extends only to the original purchasers who acquire
new products from BDI Authorized Resellers. To be eligible for warranty
coverage, any product, part, or component must have been assembled, installed,
used, and maintained according to BDI’s published instructions. Any
modification to the original product voids the warranty.
To view BDI’s complete warranty information, visit
www.bdiusa.com/warranty
PRODUCT REGISTRATION
Registering your new BDI product allows us to send you important product
updates, service information, and helpful hints related to your BDI products.
Register today, and you will be entered to win free a BINK table from BDI:
www.bdiusa.com/register
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws. Profile & BDI are trademarks of
Becker Designed, Inc. All rights reserved.
©2024, BDI | V.12.06.2023
Made in China.
Documents / Resources
| BDI
8477 Modern Media Plus Storage
Console
[pdf] Instruction Manual
8477 Modern Media Plus Storage Console, 8477, Modern Media Plus Storage
Console, Media Plus Storage Console, Plus Storage Console, Storage Console,
Console
---|---
References
- BDI Furniture | Designed for Modern Living
- Caring for BDI’s Satin-Etched Glass | BDI Furniture
- Register Your BDI Product | BDI Furniture
- Limited Warranty | BDI Furniture
- The Distinction, Diversity and Durability of Natural Wood | BDI Furniture
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>