Electronic 2C522E ESR Magnetic Wireless Car Charger HaloLock User Manual

Electronic 2C522E ESR Magnetic Wireless Car Charger HaloLock

Model: 2C522E

Diagram Description
The top section of the image presents a diagram illustrating the assembly of the ESTI Magnetic Wireless Car Charger, consisting of five components. Each component is numbered and has arrows indicating the direction in which they connect to each other.

1. The first component shows the mounting surfaces that attach to the vehicle’s dashboard or air vent.
2. The second component illustrates the ball-joint mechanism that allows for the adjustment of the viewing angle.
3. The third component demonstrates the magnetic charging module with an emphasis on its rotational capability.
4. The fourth component depicts the cable management system, ensuring a tidy setup.
5. The fifth component is the actual charging pad where the device is placed for charging.

A small inset diagram highlights the ball joint’s adjustability, showing four components:

1. A tightening ring for securing the position.
2. The ball joint itself.
3. An adjustment knob for changing the viewing angle.
4. Connection to the charging pad.

Specifications

Additional Information
At the bottom of the image, there is a QR code accompanied by text that says, “Scan to watch a quick setup video.” There is also a URL provided: www.esti.com/config/2c522.

Compliance Information
Compliance information is provided for several regions, including a Declaration of Conformity for the EU, FCC ID information for the United States, and IC ID information for Canada. Specific details and identification numbers for compliance are included.

For example, the FCC ID is 2ASVH-2C522E, and the IC ID is 23451-2C522E. The Declarations of Conformity are available in multiple languages including English, German, French, Italian, Dutch, and Spanish.

Please note that the original image contains additional text and information in small print, which is not fully transcribed here due to the complexity and volume of the content.

Overview Description

1. Charging pad
2. Indicator light
3. USB-C port
4. Heat vent
5. Mounting clamp

Indicator Light Guide

If ar error is detected:

1. Check that your phone supports wireless charging and does not have any credit cards, stands, or other metal attachments on the back (other than the magnetic ring).
2. After checking the above, unplug and plug in the charging cable again to resume normal charging.

Important Reminders

1. The Halol ock™ charging pad only supports magnetic attachments: with a caseless Phone with MagSafe, an official MagSale case, an [SR I laloLock “case or a standard case with a HaloLock* Universal Ring. It may not attach to other magnetic cases. It will not attach to any other non-magnetic phones or cases. (Over time, the charger may leave a faint circular mark on the back of your phone that can be easily cleaned with an alcohol wipe.)
2. This charger supports an input of 9V-2.2A and outputs a maximum of 15W to iPhones.
3. We recommend using the included power cable to power the charger. Using a different cable may prevent the charger from charging.
4. This charger requires a charging adapter that supports QC or PD fast charging and an output: of at least 18.
5. A charger must be plugged into the power supply to charge devices.

Safety Warnings

1. Do not place the device in temperatures below 0°C (32°F) or above 60°C (140°F).
2. Do not attempt to disassemble the device, expose it to an open flame, or submerge it in water to avoid damaging the device.
3. Always check for damage to the device, cables, or other accessories before using the device. If damaged, do not use the device.
4. Do not disassemble or modify this product for any reason as this may cause malfunctions, damage, and/or lead to the ingestion of disassembled parts by children.
5. Do not expose the device to extremely not, humid, or corrosive environments to avoid damaging the device.
6. This product contains magnets. As such, it should be kept at a safe distance from medical devices such as pacemakers and defibrillators at all times to avoid interference. If no wireless charging is involved, a safe distance means at least 6 inches (15 cm? wire ess charging is involved, & state distance means at least 12 inches (30 cm). li you suspect interference, discontinue use of the oroduct immediately and consult a doctor and/or the manufacturer of the medical device immediately.

Installation And Use

FCC STATEMENT

FCCID: 2APEW-2C522E
This device complies with part 15 of the FCC Rules. The operator is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This environment complies with CC Rr radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance /of 0cm between the radiator &your body.

IC: 24790-2C522E
This device complies with Industry Canada licence-exempt R55 standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, and use interference that may cause undesired operation of the device.

This equipment complies with the IC RF radiation exposure limits set for an uncontrolled environment.

This product complies with the radio interterence requirements of the European Community.

Declaration of Conformity

This product is intended for use within Europe. Electronic Silk Road Corp. hereby declares that this product 2C522z complies with the essential requirements and other relevant provisions of Directive 2014/53/CU, 2014/35/CU, 2014/30/CU.

The Declaration of Conformity for the 2C522E is available from www.esrgear.com.

Scan to watch a quick setup video

Documents / Resources

| Electronic 2C522E ESR Magnetic Wireless Car Charger HaloLock [pdf] User Manual
2C522E ESR Magnetic Wireless Car Charger HaloLock, 2C522E, ESR Magnetic Wireless Car Charger HaloLock, Magnetic Wireless Car Charger HaloLock, Wireless Car Charger HaloLock, Car Charger HaloLock, Charger HaloLock, HaloLock
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>