SHANTOU CITY ZHONGWANG ELECTRONIC CO LTD ZW-PG02 Wireless Headphone Owner’s Manual
- June 1, 2024
- SHANTOU CITY ZHONGWANG ELECTRONIC CO LTD
Table of Contents
CITY ZHONGWANG ELECTRONIC CO
LTD ZW-PG02 Wireless Headphone
Owner’s Manual PRODUCT MANUAL
Packaging items
Wireless headphone
Manual
Charging cable
Precautions
- Store and use this product in a normal temperature environment;
- Do not expose this product to rain or moisture;
- Do not throw, to avoid damage caused by falling products;
- Do not disassemble, repair and modify this product;
- Do not use chemical solvents to wipe the product;
- Do not arbitrarily discard or put n the fire, so as not to cause danger!
Tips
In order to achieve the best sound quality headphones, please wear your
headphones normally, do not disassemble the hardware yourself, use dry, soft
cotton and so on.
We recommend that you take the following precautions:
- please is ten to the appropriate volume of music, to prevent the adverse effects of hearing.
- do not use the product in the exposed liquid, wet or moisture in the environment.
- when the temperature exceeds the specified temperature range O to 40 , do not operate the product. (If the range exceeds the specified temperature, turn off the device and allow the temperature to stabilize within the specified operating range.)
Instructions
NO| Function| Headset state| Operation| Prompt|
Indicator light
---|---|---|---|---|---
1| Power on| Power off| Press MFB button for 1 second| “Power on”| The blue
light flashes after a long time bright
2| Power off| Power on| Press MFB button for 3second| “Power off”| The red
light stayed on for about a second
3| Successfully connected to
mobile phone| Standby| /| “Connected”| Blue light flashes about once every 3
seconds
4| Disconnect from
mobile phone| Connect the standby| /| “Disconnected”| I
5| Auto pairing| Power off| /| “Connected”| Blue light flashes about once
every 3 seconds
6| Volume
Adjustment| In a call/music| Lon g press the volume “V+”, “V•”| I| /
7| Last song| In the play| Press “V-“| I| /
8| Next song| In the play| Press “V+”| I| I
9| Music play/pause| In the play| Press MFB| /| Blue light flashes about once
every 3 seconds
10| Income call| In call| /| dudu…dudu…| /
11| Answer call| In call| Press MFB| /| I
12| Reject call| In call| Long press the MFB for about 2 seconds| /| /
13| Redial last number| Standy| Double press MFB| /| I
14| Hang up the phone| In call| Press MFB| /| /
15| SD card pattern| On state| Insert TF card| SD MODE| Blue lights flash
16| FM pattern| On state| Double press “V+”| FM MODE| Blue lights flash
17| FM auto
search pattern| FM pattern| Double Press MFB| /| Blue lights on
Notice
FCC compliance information statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1 )This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
Caution: Any changes or modi?cations not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the folowing measures:
(1)Reorient or relocate the receiving antenna.
(2)Increase the separation between the equipment and receiver.
(3)Connect the equipment into an outlet on a circuit diferent from that to
which the receiver is connected.
(4)Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The devices has been evaluated to meet general RF exposure requirement the
device can be used in portable exposure condition without restriction