DALTACK Desk Organizers Magazine Binder Folder Holder Installation Guide
- June 16, 2024
- DALTACK
Table of Contents
DALTACK Desk Organizers Magazine Binder Folder Holder
INSTALLATION INSTRUCTION
Components
The installation kit includes several parts and tools necessary for assembly. The main component is labeled as Part A, which appears to be a foldable panel. Additional small parts such as screws and rubber feet are included, as well as a tool labeled as Part H, which is a screwdriver.
Assembly Instructions
- Step 1: Preparing Part A
- Fold the sides of Part A inwards as indicated by the arrows in the diagram.
- Step 2: Attaching Part B
- Insert Part B along the side slots of Part A as illustrated.
- Step 3: Securing with Screws
- Tighten Screw E on both sides of Part C to secure the components together.
- Step 4: Adding Part C
- Insert Part C as shown in the picture, ensuring it fits into place.
- Step 5: Fixing Part D
- Insert Part D along the vertical slots, repeating this step multiple times if necessary.
- Step 6: Final Touches
- Clip on rubber feet for better stability and insert a name card if needed to complete the assembly.
Specifications
| Part | Description |
|---|---|
| A | Foldable Panel |
| B | Side Attachment |
| C | Front Attachment |
| D | Vertical Attachment |
| E | Screw |
| F | Rubber Feet |
| G | Name Card Slot |
| H | Screwdriver |
FAQs
- Q: How do I know if all parts are included?
- A: Refer to the ‘Components’ section above for a list of all included parts and tools.
- Q: What do I do if I have missing or damaged parts?
- A: Please contact the provided support email Salesupport2020@163.com for assistance.
- Q: Can I adjust the tightness of the screws?
- A: Yes, adjust the screws to ensure the parts are securely attached but do not overtighten as this may strip the threads.
- Q: Is it necessary to use all the parts provided?
- A: Yes, for the complete assembly of the product, all parts must be used as instructed.
What Include
Fold the Sides of Part A inwards
Installation Instruction
- Step 1: Insert B along A’s Side Slots
- Step 2: Tighten Screw E on both Sides
- Step 3: Insert C as picture showed
- Step 4: Tighten Screw E on both Sides of C
- Step 5: Insert D along vertical slots
- Step 6: Repeat Step 6 multiple times
- Step 7: Clip on Rubber feet for better stand
- Step 8: Insert Name Card if needed
- Step 9: Finished
Amaproblem, please contact the
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>