XIANG XING LIGHTING 668BK9 Outdoor Wall Light Installation Guide

Table of Contents

Specifications

Product Name: 668BBK9 Wall Lamp
Power Supply: Requires electrical connection
Maximum Wattage Rating: Refer to fixture label and website for correct wattage

Installation

Step 1:

Step 2:

Loosen the two nuts on the lamp base.
Forcefully pull out the top lamp cap.
Forcefully pull out the lamp cap below.
Loosen the ground wire screw on the metal shelf.
Fix the metal shelf on the wall using the two screws provided in the accessories bag.

Step 3:

Connect wires according to color code (White on White, Black on Black, Ground on Ground) using wire connections.
Circle the ground wire on its screw and tighten them.
Fix the lamp base with the two nuts.

Step 4:

Install the first bulb with the correct wattage and type of lamp marked on the fixture label and website. Do not exceed the maximum wattage rating.
Press the top lamp cap back firmly.
Install the second bulb with the correct wattage and type of lamp marked on the fixture label and website. Do not exceed the maximum wattage rating.
Press the lamp cap below firmly.
Reconnect power.

FAQ (Frequently Asked Questions)

Q: What should I do if there are missing or damaged parts?
A: Do not operate the fixture with missing or damaged parts. Contact our customer support for assistance.
Q: How do I determine the correct wattage and type of lamp to use?
A: Refer to the fixture label and our website for the correct wattage and type of lamp to use. Do not exceed the maximum wattage rating.
Q: Can I touch the lens, guard, or enclosures?
A: No, do not touch the lens, guard, or enclosures. Allow the fixture to cool down before servicing.

WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:

To prevent electrical shock, disconnect power supply before servicing.
Do not touch lens, guard or enclosures. Allow fixture to cool down before servicing.
Do not operate fixture with missing or damaged parts.

STEP 1
To prevent electrical shock, disconnect power supply before installation
STEP 2
Loosen 2 nuts that on lamp base;
Pull out the top lamp cap forcefully;
Pull out the lamp cap below forcefully;
Loosen ground wire screw that on metal shelf;
Fix metal shelf on wall with 2 screws in accessories bag;
STEP 3
Connect wires according to color code (White on White, Black on Black, Ground on Ground) by wire connection;
Circle ground wire on its screw and tighten them;
Fix lamp base with 2 nuts;
STEP 4
Install the first bulb with correct wattage and type of lamp marked on fixture label and Website, Do not exceed the maximum wattage rating;
Press the top lamp cap back firmly;
Install the second bulb with correct wattage and type of lamp marked on fixture label and Website, Do not exceed the maximum wattage rating;
Press the lamp cap below firmly and reconnect power.