Dorman 667-203 Turbocharger Installation Guide
- June 16, 2024
- DORMAN
Table of Contents
Dorman 667-203 Turbocharger
Product Information
- Specifications
- Product Name: Generic ABS Module Light
- Compatibility: Various Makes and Models
Product Usage Instructions
- Installation
- To install the Generic ABS Module Light, please follow the steps below:
- Ensure that the vehicle’s engine is turned off and the ignition is in the off position.
- Locate the ABS module in your vehicle. The ABS module is typically found near the brake master cylinder.
- Disconnect the negative battery cable to ensure safety during the installation process.
- Remove any protective covers or panels that may be obstructing access to the ABS module.
- Using a suitable wrench or socket, carefully remove the bolts securing the ABS module in place.
- Gently disconnect any electrical connectors or wiring harnesses attached to the ABS module.
- Carefully remove the old ABS module from its mounting position.
- Take the Generic ABS Module Light and align it with the mounting holes of the ABS module.
- Securely fasten the Generic ABS Module Light in place using the provided bolts.
- Reconnect any electrical connectors or wiring harnesses that were disconnected earlier.
- Replace any protective covers or panels that were removed during the installation process.
- Reconnect the negative battery cable.
- Resetting ABS Light
- If an ABS light appears after installing the Generic ABS Module Light, follow these steps to reset it:
- Start the vehicle’s engine.
- Drive the vehicle for a few miles at a moderate speed to allow the ABS system to recalibrate.
- The ABS light should automatically reset during this process.
- Frequently Asked Questions (FAQ)
- Q: What should I do if the ABS light does not reset after driving the vehicle?
- A: If the ABS light does not reset after driving the vehicle, please contact our customer support for further assistance. They will be able to provide you with additional troubleshooting steps or arrange for a replacement if necessary.
- Q: Can I install the Generic ABS Module Light myself, or should I seek professional help?
- A: The installation of the Generic ABS Module Light can be done by following the provided instructions. However, if you are unsure about any step or lack experience in handling automotive components, it is recommended to seek professional help to ensure proper installation and avoid any potential damage to your vehicle.
INTRODUCTION
TECH NOTES: INSTALLATION
ATTENTION:
- Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part.
- If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician.
- Pay special attention to all cautions and warnings included in the shop manual.
- Read and follow all instructions carefully.
- This product is only designed to function properly on specific vehicle applications.
- Please verify that the vehicle requirements match the product specifications and application notes for this part.
Various Makes and Models
NOTE:
- Once this ABS module is installed, an ABS light may appear with no codes.
- Simply drive the vehicle for a few miles to reset the ABS light.
Disclaimer
- Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations.
- Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do.
- Automobiles can be hazardous to work on; be sure to take all necessary safety precautions.
- Failure to do so may result in property damage or personal injury.
- Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration).
- Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
- Dorman Products, Inc.
- Corporate Office and Customer Service: 1-800-523-2492
- ©2021 No reproduction in whole or in part without prior written approval.
- GenericABSModuleLight_Tech-Note
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>