PETLIBRO PLWF007 Glacier Automatic Pet Water Fountain User Manual
- June 16, 2024
- PETLIBRO
Table of Contents
PETLIBRO PLWF007 Glacier Automatic Pet Water Fountain
*Please read this manual before using the product and keep it for future reference.
In the Box
-
1 × Automatic Pet Water Fountain
-
1 × Power Adapter
-
1 × Power Cable
-
1 × User Manual
-
1 x Cleaning Brush
Product Overview
- Water Tank
- Water Tray
- Water Outlet
- Water Level Indicator
- Filter Life Indicator
- Power Button
- Filter Life Reset Button
- Pyroelectric Sensor
- Ultrafiltration Filter
Button
Button | Operation Status |
---|
Power
| Press and hold for three seconds to power on/off
Filter Life Reset
| After replacing the filter, press and hold for six seconds to reset the filter life
Water Level Indicator
Indicator Status | Device Status |
---|---|
White on | Sufficient water level |
Red on | Insufficient water level |
Off | The water fountain is powered off |
Filter Life Indicator
Indicator Status | Device Status |
---|
Three blue lights on
| The filter life is about 40–60 days
Two blue lights on
| The filter life is about 20–40 days
One blue light on
| The filter life is about 7–20 days
One red light on
| The filter life is less than 7 days
Three lights off
| The water fountain is powered off
Getting Started
Scan the QR code above to watch the video for product installation and
cleaning.
Notes:
- Replace the filter every two months as indicated by the filter life indicator.
- Clean the water tank at least once every seven days.
Power on
Scan the QR code above to watch the video for product installation and
cleaning.
Plug the fountain into a wall outlet using the power adapter and power cable.
Power of
Unplug the cable from the outlet or press and hold the power button for three
seconds.
Specifications
Model | PLWF007 |
---|---|
Power Adapter | Input: AC 100–240V 50/60Hz |
Output: DC 5V 1A
Water Tank Capacity| 2.5L
Water Tank Material| SUS304 stainless steel
Dimensions| 265 × 220 × 167mm
10.43 × 8.66 × 6.57in
Weight| 1.75kg / 3.86lb
Safety Instructions
- Use the fountain in a dry place.
- Use the fountain on a level surface.
- Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets.
- Do not use the water fountain with pets that are not able to reach the water tray or with any physical disability.
- Do not immerse the water fountain (except the tank) in water at any time as it may damage electronic components.
- Do not use the fountain outdoors. Check its operation frequently to be sure it is operating properly.
- Do not disassemble the fountain other than as instructed in this user manual.
- Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.
- Do not modify the fountain.
- Examine the fountain after installation. Do not plug in if there is water on the power cable or plug.
- To avoid tripping, always position the power cable out of the way of foot traffic.
- Do not install or store the fountain where it will be exposed to weather or temperatures below 0°C (32°F).
- Do not use the fountain without adding water first.
- Power of the fountain when it’s not in use.
Warranty
- 12-month warranty
- For guidance on product use, please contact our customer service team via email: support@petlibro.com.
Notice
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radio frequency exposure statement
To maintain compliance with the FCC’s RF Exposure Guidelines, this equipment should be installed and operated with a minimum distance of 20cm from your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>