ROBBE 566 Adjust Watch Instruction Manual
- June 16, 2024
- robbe
Table of Contents
ROBBE 566 Adjust Watch
Adjust watch
- Place the tool and strap on a flat surface (desk or table).
- If necessary, detach the metal watch strap from the case. This allows you to place the belt on the table in its full length.
- Place your metal watch strap on the shortener and press the long pin against the push pin.
- With the watch strap shortener, push the pushpin outwards and pay close attention to the direction of the arrows.
- Turn or push until the pushpin pops out. Be patient. If it does not work, you can use a small hammer by means of a hammer. give a point (of tweezers or the like) a tap. We recommend that you put the cleaning cloth on the pin so that you do not damage the watch when ‘hammering’.
- Remove the pin with pliers.
- Repeat this process with other links.
- Once you have removed the link, push the push pin back in by hand and tap it at the end with a hammer or press it further in with the watch strap shortener (the pin).
- Keep the leftover links and push pins in a handy place!
Adjust time
Adjust date/day
- Click the wheel halfway out and turn it clockwise to adjust the day.
- Each day is listed twice, if you set the day in the morning, make sure you select the first day format. In the afternoon you choose the second day format.
- Click the wheel halfway out and turn counterclockwise to adjust the day.
Adjust time
- Click the wheel completely out, turn clockwise to return the minute hand.
- Unclip the wheel completely, turn counterclockwise to advance the minute hand.
- Click the wheel back in.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>