robbe 50612 Deflection Gauge Instruction Manual

June 12, 2024
robbe

robbe 50612 Deflection Gauge Instruction Manual
Deflection Gauge

Instruction

  1. Glue 4 pieces of each of the wooden parts shown together (wood glue) and glue them in turn into the recess of the support plate.
    Product Parts

  2. Stick on the self-adhesive rubber pad and cut to size:
    Rubber Pad

  3. Stick on the self-adhesive rubber pad and cut to size:
    Rubber Pad

  4. The pre-bent steel wire bracket is guided through the tube and fixed with a lock nut:
    Steel Wire Installation

  5. The scale for measuring the rudder deflections must first be glued together (wood glue):
    Scale Rudder

  6. Now glue the plastic holders for the steel wire bracket to the back (super glue). Afterwards the bracket can be clipped into the plastic holders:
    Steel Wire Clipped

DISTRIBUTOR

Robbe Modellsport
Industriestraße 10
4565 Inzersdorf im Kremstal Austria
Phone: +43(0)7582/81313-0
Mail: info@robbe.com
UID No.: ATU69266037

„robbe“ is a registered
Trademark.
Errors, misprints and technical changes
reserved.

Copyright 2023
Robbe Modellsport 2023
Copy and reprint only
with our permission.

Service-Address
Contact your Dealer or:
Robbe Modellsport, Industriestraße 10,
4565 Inzersdorf im Kremstal
service@robbe.com, +43(0)7582-81313-0

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals