ET2 Contemporary Lighting E14384 Boardwalk LED Outdoor Wall Sconce Instruction Manual
- June 8, 2024
- ET2 Contemporary Lighting
Table of Contents
PRODUCT NAME: Boardwalk LED Outdoor Wall Sconce
ITEM NUMBER: E14384
E14384 Boardwalk LED Outdoor Wall Sconce
Please consult a qualified electrician for hanging fixture and wiring.
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
WARNING: Wires need to be connected to driver found in canopy and should
not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fug tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Contents
Before getting,started,ensure the package contains the following components:
| A | ****FIXURE | x1 |
|---|---|---|
| B | SCREW | x2 |
| C | WIRE NUTS | x3 |
| D | SAND PAPER | x1 |
| E | INTERNAL HEXAGONAL WRENCH | x1 |
| --- | --- |
To prevent water intrusion, caulk around back-plate where fixture meets the
wall using outdoor silicone sealant.
Leave a small gap at the bottom to allow moisture to escape.
3. Sand paper to clean the dirty things.
Light Source: 2-PCB Integrated-6W
Made in China
Documents / Resources
| ET2
Contemporary Lighting E14384 Boardwalk LED Outdoor Wall
Sconce
[pdf] Instruction Manual
E14384 Boardwalk LED Outdoor Wall Sconce, E14384, Boardwalk LED Outdoor Wall
Sconce, LED Outdoor Wall Sconce, Outdoor Wall Sconce, Wall Sconce, Sconce
---|---