Televes EFV3N EasyF 3W Mini Splitter Instructions
- June 16, 2024
- Televes
Table of Contents
Televes EFV3N EasyF 3W Mini Splitter
Product Information
- Specifications
- Product Name: EasyF 3W Mini-Splitter
- Frequency Range: 5…2400 MHz
- Insertion Loss: 8.5 dB
- Return Loss: 7.5 dB
- Connection System: EasyF
- Indoor/Outdoor Use: Indoor (can be used outdoors with a case)
- Net Weight: 55.00 g
- Gross Weight: 55.00 g
- Dimensions: Width – 57.00 mm, Height – 46.00 mm, Depth – 11.00 mm
- Main Features
- EasyF connection system for easy installation and savings on mounting.
- Made of Zamak material, providing high shielding.
- Outstanding reliability is achieved through automated manufacturing using new-generation micro-components.
- Improves signal quality by reducing through losses.
- Excellent electrical behavior with impulsive noise reduction.
- Grounding screw provided for proper grounding.
- DC passes from the outputs to the input.
Product Usage Instructions
- Installation
- Ensure the device is suitable for indoor installation or use a case (ref. 417801) for outdoor installation.
- Find a suitable location for installation, considering the ultra-small size of the mini-splitter.
- If using the EasyF connection system, follow the steps below. Otherwise, refer to the traditional F connector installation method (not provided in this manual).
- EasyF Connection System Installation Steps
- Unscrew the device’s cover to access the connection.
- Strip the coaxial cables that need to be connected.
- Insert the previously stripped coaxial cables into the device’s connectors.
- Close the cover and screw it to ensure a secure connection.
- Note: Detailed instructions and additional information about the EasyF system reliability can be found on the official website: https://www.televes.com.
- FAQ
- Can the EasyF 3W Mini-Splitter be used outdoors?
- Yes, the mini-splitter can be used outdoors with a case (ref. 417801) for protection against weather conditions.
- What is the weight of each mini-splitter?
- The net weight and gross weight of each mini-splitter is 55.00 g.
- Does the mini-splitter support DC pass?
- Yes, the mini-splitter supports DC pass from the outputs to the input.
Mini-Splitter
EasyF 3W Mini-Splitter
- 5…2400 MHz 8.5 dB/7.5 dB
- 3-way Mini-Splitter and EasyF connection system for SMATV signals.
- Its innovative ultra-small size allows installation virtually anywhere, including small pattress boxes.
- Furthermore, miniaturization applies also to electronics, which improves electrical behavior and reduces impulsive noise.
- concieved for indoor installation, it can also be used outdoors with a case (ref. 417801). Supplied in 10-unit boxes.
| Ref. | 543603 |
|---|---|
| Logical ref. | EFV3N |
| EAN13 | 8424450165775 |
Packing
- Box 10 pcs.
Physical data
- Net weight 55.00 g
- Gross weight 55.00 g
- Width 57.00 mm
- Height 46.00 mm
- Depth 11.00 mm
- Main product weight 55.00 g
Highlights
- EasyF connection system: easy to install, savings on mounting Made of Zamak, high shielding
- Outstanding reliability: automated manufacturing using new-generation micro-components
Main features
- Improves through losses
- Outstanding electrical behavior: impulsive noise reduction
- Grounding screw provided
- DC passes from the outputs to the input
Discover
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the
coaxial cable is directly inserted into the device, thus improving connection
reliability. Thanks to the absence of F connectors, the chassis can be
reduced, and the connection of two cables secured with a single screw.
- Real-time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room.
- Connection reliability: the clamp holding the cables prevents the coaxial cable from coming off Cost savings: no additional connectors are required (neither F nor IEC) Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier.
Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
- Unscrew the device’s cover to access the connection.
- Insert the previously stripped coaxial cables
- Close the cover and screw to ensure connection
System Reliability
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
- Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed
- Failure rate reduction: usually produced as a result of cold soldering joints
- Electromagnetic behavior optimization: for high frequencies
- Our commitment to the environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced.
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>