rizoma PT514 License Plate Support Ducati User Manual
- June 4, 2024
- rizoma
Table of Contents
User Manual Rev.: 04
PT514 License Plate Support Ducati
Before you start
Benvenuto in Rizoma Welcome to Rizoma
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you on your excellent choice. Please carefully follow the instructions in this
guide will allow you to mount and use the product correctly and enjoy all the
features it has.
For your protection and safety, RIZOMA expressly recommends that you have the
installation of the product performed by skilled personnel. Improper
installation, repair, or maintenance, can cause accidents. Keep this user
guide as a reference for the future.
Condizioni generali General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, so as to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped, or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace them with Rizoma’s original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your, safety Rizoma suggests always contacting your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
License plate
To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as per the enclosed instructions. Consult the website www.rizoma.com, in the FOX license plate support section click “DOWNLOAD” to download the PDF document approval ABE.
**Before you start mounting the product please check the completeness of
the kit on the part list. The difficulty level and the time of assemblage
shown do not include the removal of OEM components. Warning: Make sure that
your motorbike is standing firmly before you start work, as a fall may lead to
damage to the motorbike or injury to you or others, also make sure that the
temperature of the exhausts and the engine is similar to the ambient
temperature.
WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE
PRODUCTS, OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE BUT
USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
** Improper installation could damage the electrical system of the
motorcycle and cause a fire, resulting in personal injury or death. Electrical
shock hazard. Disconnect the battery before starting to install the turn
license plate bracket or rear light or the turn signals. The pins must always
be isolated and respect the polarity in the connections. The warranty is not
valid for any electric wire cutting or any product modification or tampering.
GRANDI INSTALL A PLATE FOR MEDIUM
INSTALL PLATE FOR SMALL LICENSE PLATE
INSTALL UNIVERSAL LICENSE PLATE
NSTALL DELRIN SUPPORT
INSTALL LICENSE PLATE ON OEM UNDER SEAT
****Before fixing the complete license plate to support insert the electric wiring. (Fixing the license plate avoid to damage the electric wiring).
INSTALL PIN OF POSITIONING
INSTALL PIN OF POSITIONING
INSTALL TURN SIGNALS
ELECTRIC WIRINGS
ADJUSTABLE LICENSE PLATE
Warnings
**** RIZOMA reserves the right, in its sole discretion, to make changes to
the product and this information at any time and without prior notice.
Although many catalogs and advertisements depict riders engaged in extreme or
stunt riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based on contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full-face helmet), that has been approved by ANSI, SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
styles, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Legal note
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries
where homologation is required. Thus RIZOMA® Srl declines any responsibility
for different use of its products. 