SUPERATV IN-WM-P-RZRXP-001 Winch Mount Installation Guide
- June 16, 2024
- SUPERATV
Table of Contents
SUPERATV IN-WM-P-RZRXP-001 Winch Mount
INSTALLATION INSTRUCTIONS
- Do not discard packaging until product has been successfully installed.
CUSTOMER NOTIFICATION AND DISCLAIMER LIABILITY
This product is a modification for utility task vehicles and all terrain vehicles. Use this product at your own risk.
Warranty and Liability Limitations.
The Buyer hereby assumes all risks associated with the use and/or installation
of this product. Buyer waives all liability claims against SuperATV® of any
kind or nature, including, but not limited to, liability for penalties, fines,
property damage, personal injury or death, to the fullest extent permitted by
law. Buyer acknowledges and agrees that SuperATV® is not liable for any
direct, indirect, incidental, consequential or special damages, including but
not limited to, damage, loss of life, loss of property or equipment, loss of
profits or revenue, injury, or claims from any individual or entity arising
from the use of this product. The warranty for this product, if any, may give
you (“Buyer”) specific legal rights, and Buyer may also have other rights
which may vary from state to state. The installation of this product may void
or otherwise adversely affect your factory warranty.
Consult your vehicle warranty before using this Product.
Under no circumstances will SuperATV® be liable for the voidance of the
Buyer’s vehicle warranty. Buyer assumes all risk
and responsibility if a manufacturer and/or dealer voids the Buyer’s vehicle
warranty due to use of this Product.
Safety and Laws.
Operate your vehicle at all times in a safe manner. You must abide by all
local, state, and federal laws, including but not limited to vehicle safety,
traffic laws,
and ordinances. It is your responsibility to know the laws and how they apply
to you. The installation of this product may violate certain local, state, and
federal laws. Be advised
that laws vary depending on town, city, county, state, etc. Use of this
product on public streets, roads, or highways may be in violation law. The
Buyer is solely and exclusively
legally and personally responsible for any violation of the law by the
installation or use of this product. In no case will SuperATV® be held liable
if Buyer violates the law or uses the product in an unsafe manner.
The Buyer is responsible to fully understand the capability and limitations of
his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to hold
SuperATV® harmless from any damage resulting from failure to adhere to such
specifications, warnings and/ or instructions. The Buyer is also responsible
to obey all applicable federal, state, and local laws when operating his/her
vehicle while using this product, and the Buyer agrees to hold SuperATV®
harmless from any violation thereof.
Installation.
The installation of this product on your vehicle indicates that you have had
the opportunity to inquire about applicable local, state, and federal laws and
ordinances and that you have read and understand, and accept all of the terms
of, this Disclaimer. SuperATV® shall not be responsible for the proper
installation, use, and service of this product. Rather, the Buyer shall be
solely responsible for the installation of the product and any damage that may
be done to the vehicle or vehicle components as a result of modifications made
by the Buyer.
Remove components shown from each side of machine. Keep all
components.
- Reinstall components after Winch installation is complete.
- Install Mount to machine with hardware shown; tighten.
- Install Winch to Winch Plate with hardware shown; tighten.
- Install Winch Plate to Mount with hardware shown; tighten
-
Connect Winch Wiring. See “Winch Guide”.
-
Install Fairlead to Skid Panel with hardware shown; tighten.
- Depending on Winch size, Fairlead Adapter may need to be installed to Skid Panel with hardware shown; tighten.
- Install Fairlead to Fairlead Adapter; tighten. Fairlead and hardware included with Winch.
- Install Skid Panel to Mount with hardware shown; tighten.
- Install Fascia to machine and Skid Panel with hardware shown; tighten.
Need help with your installation?
WEBSITE:www.superatv.com
CONTACT: 1-855-743-3427
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
Documents / Resources
|
SUPERATV IN-WM-P-RZRXP-001 Winch
Mount
[pdf] Installation Guide
IN-WM-P-RZRXP-001 Winch Mount, IN-WM-P-RZRXP-001, Winch Mount, Mount
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>