JOYROOM R200 RGB Wireless Speaker User Guide
- June 16, 2024
- Joyroom
Table of Contents
JOYROOM R200 RGB Wireless Speaker
Product Specifications
| Product Name: | RGB Wireless Speaker R200 |
|---|---|
| Product Model: | R200 |
| Material: | ABS |
| Net Weight: | 160g |
| Input: | USB DC5V/2A |
| Product Size: | 122x122x31mm |
Packet list
- RGB WirelessSpeaker R200 x1
- USB Data cable x1
- Manual x1
Production
- Keys
- Speaker
- Lighting
Product Description
- Long press: Total power-turn on/off (After the light is turned off, you can press and press it)
- Short press: Switch light mode
- (Law RGB/Automatic RGB/warm light/white light/turn)
- Long Press:
- Light Brightness Adjustment
- Double-click:
- Wireless -turn on/cut off/off (10 minutes after cutting, do not operate automatically, turn off Wireless£©
Wireless connection
- After the speaker is turned on, it automatically enters the Wireless search connection mode.At this time. there are prompt sounds. Found on the Wireless settings page of the mobile device, and the “R200” is connected.
Indications
- Charging status-red lights are always bright;full-charged state-blue lights are often on;
- low-power state-sound reminder.
Product Parameters
- Product Name: RGB Wireless Speaker R200
- Product model: R200
- Material: ABS
- Net weight: ¡Ö160g
- Input: USB DC5V/2A
- Product size : 122X122X31mm
Fcc Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable
FAQ
- How do I turn the speaker on or off?
- Long press the power button to turn the speaker on or off.
- How do I change the light modes?
- Short press the power button to cycle through the RGB, warm light, and white light modes.
- How can I adjust the brightness of the light?
- Double-click the power button to adjust the light’s brightness.
- What do the indicator lights mean?
- Red lights indicate charging, blue lights indicate a full charge, and a sound reminder indicates low power.
- What should I do if my speaker causes interference with other devices?
- Try reorienting the receiving antenna, increasing the separation between the devices, connecting the equipment to a different outlet, or consulting a technician.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>