MEAN WELL KAA-8R KNX Universal Actuator Owner’s Manual
- June 16, 2024
- MEAN WELL
Table of Contents
KNX Universal Actuator
KAA-8R
User’s Manual
Features
- 8 channel actuator in a compact size
- Suitable for various and mixed applications
- For AX, C-load, capacitive & inductive of loads
- Program via ETS5.0 software
- Manual control via Push button
- Programmable various time and scene function
- 3 years warranty
Applications
- Building Automation
- Lighting switch
- Shutter/Blind control
- Heating control
- Ventilation function
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
Description
The KNX actuator is a 8 channel device with high quality independent latching relay for switch, shutter or any possible mixed applications. The compact design with 4 units (72 mm) wide modular makes it suitable for installation in the distribution board on 35 mm mounting rails in the EIB / KNX application. The connection to the KNX bus is implemented via a bus connection terminal.The switching relays are particularly suitable for switching ohmic loads, capacitive loads, for instance LED drivers and inductive loads as well as motors in shutter or blind applications.The actuator are powered via the EIB/ KNX and do not require any additional power supply.
Model Encoding
| Type | Function | Note |
|---|---|---|
| Blank | 8 channel actuator, 16A per channel | ln stock |
| -10 | 8 channel actuator, 10A per channel | ln stock |
SPECIFICATION
| ORDER NO. | KAA-8R-16 | KAA-8R-10 |
|---|---|---|
| SUPPLY | SAFETY MODEL NO. | KAA-8R |
| KNX BUS VOLTAGE | 21~31V | |
| CURRENT CONSUMPTION | <6mA | |
| POWER CONSUMPTION | <180mW | |
| Nr. OF SWITCHING OUTPUT | 8 | |
| Nr. OF SHUTTER OUTPUT | 4 | |
| OUTPUT TYPE | Independent, potential-free bistable(latching) relay | |
| OUTPUT SWITCHING RATINGS | VOLTAGE | 230VAC@50Hz |
| CURRENT | OHMIC LOAD | 16A |
| CAPACITIVE LOAD | 220μF(See Note.2) | 220μF(See Note.2) |
| MAX. INRUSH CURRENT | 800A(max. 200μs),165A(max. 20ms) | 400A(max. |
200μs),80A(max. 20ms)
B S E N/EN60947-4- 1 AC1(CO S θ =0.8 )|
16A| 10A
B S EN/EN60947-4- 1 AC3(CO S θ =0.45 )|
8A| 5A
B S EN/EN60947-4- 1 AC5a(CO S θ =0.45 )|
8A| 8A
BS EN/EN60947-4-1 AC5b| 16A| 10A
MAX. TOTAL CURRENT OF THE ACTUATOR| 80A| 56A
OUTPUT SERVICE LIFE| MECHANICAL SERVICE LIFE| >10⁶
ELECTRICAL ENDURANCE BS EN/EN60669-1 19.1| 10⁴ (See Note.2)| 410⁴ (See
Note.2)
BS EN/EN60669-1 19.2 , FLOURSCENT LAMP(AX)| 10⁴(See Note.2)| 10⁴ (See
Note.2)
OPERATING & **DISPLAY| PROGRAMMING BUTTON/LED| Program the
individual address
MANUAL BUTTON/LED| Manual control and indication
ENVIRONMENT| WORKING TEMP.| -30 ~ +45℃(3K5)
STORAGE TEMP.| -35 ~ +70℃
WORKING HUMIDITY| 10 ~ 95% RH non-condensing
PROTECTION CLASS| Ⅱ, According to BS EN/EN61140
OVER VOLTAGE CATEGORY| Ⅲ, According to BS EN/EN60664-1
POLLUTION DEGREE| 2, According to BS EN/EN60664-1
DEGREE OF PROTECTION| IP20,According to BS EN/EN60529
SAFETY & **EMC| SAFETY STANDARDS| BS EN/EN50491-3, BS
EN/EN60669-1, BS EN/EN60669-2-1, BS EN/EN60669-2-5(See Note.2), EAC TP TC 004
approved
EMC EMISSION| Compliance to BS EN/EN50491-5-1,-2,-3, BS EN/EN50090-2-2,
BS EN/EN60669-2-1, BS EN/EN60669-2-5, BS EN/EN63044-5-1,-2,-3(See Note.2), EAC
TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN50491-5-1,-2,-3, BS EN/EN50090-2-2,
BS EN/EN60669-2-1, BS EN/EN60669-2-5, BS EN/EN63044-5-1,-2,-3(See Note.2), EAC
TP TC 020
CONNECTIONS| SCREW TERMINAL| 0.5 – 4.0mm² solid core 0.5 – 2.5mm²
finely stranded
KNX BUS CONNECTION TERMINAL| 0.8mmψ, solid core
OTHERS| MTBF| 605.5K hrs min.
Telcordia SR-332 (Bellcore) ; 493.1K hrs min.
MIL-HDBK-217F (25℃)
DIMENSION| 729057mm (WH*D)
MOUNTING WIDTH IN UNITS| 4
DIN RAIL MOUNTING| 35mm mounting rail according to DIN BS EN/EN60715
PACKING| 0.312Kg ; 48pcs/16Kg/1.02CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC
input, rated load and 25℃ of ambient temperature.
2. Notified Body test report is provided.
※ Product Liability Disclaimer：For detailed information, please refer to
https://www.meanwell.com/serviceDisclaimer.aspx
Block Diagram
Mechanical Specification
Max. output load per channel
| Maximum load | KAA-8R | KAA-8R-10 |
|---|---|---|
| Resistive load or heater | 3680W | 2300W |
| LED driver | refer to table below | refer to table below |
| Incandescent lamps | 2300W | 2300W |
| Halogen lamps 230V | 2300W | 2300W |
| Halogen lamps, electronic transformer | 1300W | 1300W |
| Fluorescent lamps, not compensated | 2000W | 2000W |
| Fluorescent lamps, parallel comp. | 1200W | 1200W |
| Max. number of electronic transformers | 15 | 15 |
| Shutter motor | 600W | 600W |
Nr. of driver per channel
The maximum number of the MEANWELL LED driver that can be connected to each channel at 230V is shown as below
Suggested model| KAA-8R| KAA-8R-10
APC-8| 22| 22
APC-12| 11| 11
APC-16| 18| 18
APC-25| 11| 11
APC-35| 11| 11
APC-8E| 22| 22
APC-12E| 18| 18
APC-16E| 15| 15
APV-8| 22| 22
APV-12| 11| 11
APV-16| 18| 18
APV-25| 11| 11
APV-35| 11| 11
APV-8E| 22| 22
APV-12E| 18| 18
APV-16E| 15| 15
LCM-25| 25| 25
LCM-40| 25| 25
LCM-60| 25| 25
LCM-25DA| 25| 25
LCM-40DA| 25| 25
LCM-60DA| 25| 25
LPC-20| 11| 11
LPC-35| 9| 9
LPC-60| 8| 8
LPC-100| 7| 7
LPC-150| 13| 5
LPF-16| 18| 18
---|---|---
LPF-25| 16| 16
LPF-40| 16| 16
LPF-60| 9| 9
LPF-90| 7| 7
LPF-16D| 18| 18
LPF-25D| 16| 16
LPF-40D| 16| 16
LPF-60D| 9| 9
LPF-90D| 7| 7
LPH-18| 16| 16
LPHC-18| 16| 16
LPV-20| 11| 11
LPV-35| 9| 9
LPV-60| 8| 8
LPV-100| 7| 7
LPV-150| 8| 8
NPF-40| 10| 10
NPF-60| 10| 10
NPF-90| 8| 8
NPF-120| 8| 8
NPF-40D| 10| 10
NPF-60D| 10| 10
NPF-90D| 8| 8
NPF-120D| 8| 8
PCD-16B| 80| 80
PCD-25B| 53| 53
PCD-40B| 45| 45
PCD-60B| 26| 26
PLC-30| 23| 23
PLC-45| 23| 23
PLC-60| 23| 23
PLC-100| 13| 13
PLD-16B| 40| 40
PLD-25| 32| 32
PLD-40B| 32| 32
PLD-60B| 32| 32
PLM-12| 53| 53
PLM-25| 53| 53
PLM-40| 53| 53
PLN-20| 23| 23
PLN-30| 23| 23
PLN-45| 23| 23
PLN-60| 23| 23
PLN-100| 13| 13
PLP-30| 32| 32
PLP-45| 27| 27
PLP-60| 23| 23
PWM-40| 10| 10
PWM-60| 10| 10
PWM-90| 8| 8
PWM-120| 8| 8
HLN-40H| 10| 10
---|---|---
HLN-60H| 9| 9
HLN-80H| 7| 7
HLP-40H| 7| 7
HLP-60H| 9| 9
HLP-80H| 7| 7
CEN-60| 22| 22
CEN-75| 22| 22
CEN-100| 22| 22
CLG-60| 23| 23
CLG-100| 13| 13
CLG-150| 8| 8
ELG-75| 10| 10
ELG-100| 8| 8
ELG-150| 8| 8
ELG-75-C| 10| 10
ELG-100-C| 13| 13
ELG-150-C| 8| 8
HBG-100| 8| 8
HBG-160| 8| 8
HBG-240| 7| 7
HBG-60| 18| 18
HLG-40H| 16| 16
HLG-60H| 9| 9
HLG-80H| 7| 7
HLG-100H| 8| 8
HLG-120H| 8| 8
HLG-150H| 8| 8
HLG-185H| 8| 8
HLG-240H| 7| 5
HLG-320H| 7| 6
HLG-600H| 4| 3
HLG-60H-C| 8| 8
HLG-80H-C| 8| 8
HLG-120H-C| 10| 10
HLG-185H-C| 9| 9
HLG-240H-C| 7| 7
HLG-320H-C| 7| 6
HSG-70| 9| 9
HVG-65| 20| 20
HVG-100| 8| 8
HVG-150| 8| 8
HVG-240| 5| 5
HVG-320| 4| 4
HVGC-65| 20| 20
HVGC-100| 8| 8
HVGC-150| 8| 8
HVGC-240| 5| 5
HVGC-320| 4| 4
Configuration and Commissioning
The application program(database) can be downloaded via Online Catalogs from
ETS or via
https://www.meanwell.com//Upload/PDF/KNX_Application%20Database.pdf
It is also used to check the corresponding firmware version that works with
database.
Typical application
◎ Application 1: Work with non-dimmable driver
◎ Application 2:Work with shutter/blind control
Note: Check installation manual of shutter motor for wiring.
◎ Application 3: Work with Heater
Recommended Screwdriver, Wire and Torque Setting
- Screwdr i ver(W i dthTh i ck):S l otted screwdr i ver 2.50.4~3.5*0.6
- W i re:0.5~4.0mm2 so l i d core or 0.5~2.5mm2 f i ne l y stranded
- Torque:0.8Nm
Installation Manual
Please refer to: http://www.meanwell.com/manual.html
https://www.meanwell.com/webapp/product/search.aspx?prod=KAA- 8R&pdf=S0FBLThSLUUucGRm&a=4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>