onninen CZL542 Pole Mounted Luminaire Onnpark City Instruction Manual
- June 16, 2024
- onninen
Table of Contents
onninen CZL542 Pole Mounted Luminaire Onnpark City
Product Information
- Specifications
- Model Number: CZL542
- Supply Voltage: 40 W
- Protection Class: Not specified
- Type of Wiring: Not specified
- Power Consumption: Not specified
- Colour Temperature: 3000 K (4600 lm), 4000 K (4800 lm)
- Luminous Flux: Not specified
- Color Rendering Index: Not specified
- Degree of Protection: Not specified
- Impact Strength: Not specified
- Housing Color: Not specified
- Dimensions: Not specified
- Weight: Not specified
- Working Temperature: Not specified
- Storing Temperature: Not specified
- Max. Number of Luminaires per Miniature Circuit Breaker: Not specified
- Lumen Output: Not specified
Product Usage Instructions
- Safety Precautions
- Before using the Pole Mounted Luminaire Onnpark City, please read and follow these important safety instructions:
- Switch off the power supply before installation.
- Switch on the power supply only after complete installation and examination of the circuit.
- Installation and maintenance should be done by a professional electrician.
- Installation Instructions
- To install the Pole Mounted Luminaire Onnpark City, follow these steps:
- Turn off the power supply.
- Refer to the provided installation instructions for specific wiring and mounting details.
- Connect the brown wire to the appropriate terminal.
- Connect the blue wire to the appropriate terminal.
- Connect the yellow/green wire to the appropriate terminal.
- Make sure all connections are secure.
- Turn on the power supply and test the luminaire.
- Frequently Asked Questions (FAQ)
- Q: What is the power consumption of the Pole Mounted Luminaire Onnpark City?
- A: The power consumption is 40 W.
- Q: What is the colour temperature of the luminaire?
- A: The colour temperature is 3000 K (4600 lm) and 4000 K (4800 lm).
- Q: Can I install the luminaire myself?
- A: No, installation and maintenance should be done by a professional electrician.
- Q: What is the maximum number of luminaires per miniature circuit breaker?
- A: The maximum number of luminaires per miniature circuit breaker is not specified.
SPECIFICATION PARAMETER
| Model number | CZL542 / 4548174 |
|---|---|
| Supply Voltage | 100-240V~, 50/60 Hz |
| Protection class | Class I |
| Type of wiring | Cable 6.0 m H07RN-F 3 x 1.5 mm2 |
| Power consumption | 40 W |
| Color temperature | 2CCT: 3000 K / 4000 K |
| Luminous flux | 3000 K: 4600 Im |
4000 K: 4800 Im
Color rendering index| CRI > 80
Degree of protection| IP66
Impact strength| IK08
Housing color| Black (RAL9017)
Dimensions| Ø450 x 526mm
Weight| 8.3 kg
Working Temperature| -30°C… +50°C
Storing Temperature| -40°C…+70°C
Max. number of luminaires per
miniature circuit breaker
| B10: 13
C16: 36
| Lumen output | 3000 K | 4000 K |
|---|---|---|
| CZL542 | 40 W | 4600 lm |
Important safety instruction
To ensure correct function and safety, please read and follow all instructions carefully before using the product, Basic safety precautions should always be followed when installing, including the following:
- Turn off the power supply before installation or before doing any maintenance, cleaning, changing the globe or adjustment to the fitting.
- Do not install any luminaire near the heat source.
- IP grade please refer to the product label, only IP54 can be used in wet locations.
- Do not exceed the nominal supply voltage or amperage ratings.
- All wiring and installation of the light fitting must adhere to local and national wiring rules.
- Take care not to pull any electrical wires during unpacking as this may damage the connection.
- Lay out all the components on a smooth surface and make sure no components are missing before assembling.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.
- The light source or driver contained in this luminaire shall only be replaced by the manufacturer or other qualified person.
- Please keep instructions for future reference.
Warning:
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only.
Installation instructions
- This symbol on products and or accompanying documents indicates that used and end-of-life electrical and electronic equipment should not be disposed of in household waste.
- For the proper disposal, treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free-of-charge basis.
- Alternatively, in some countries, you may be able to return your products to your retailer upon the purchase of an equivalent new product.
- Disposing of this product correctly will help to save valuable resources and prevent any potential adverse effects on human health and the environment that could otherwise arise from inappropriate waste disposal and handling.
- Please contact your local authority for further details of your nearest designated collection point.
- Penalties may be applicable for incorrect disposal of this waste per national legislation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>