onninen 2601000 Combination Thermostat Tsense Flat Installation Guide

onninen 2601000 Combination Thermostat Tsense Flat

SPECIFICATIONS

• 16A, IP21
• Floor, room, dual, PWM mode
• Exxact, Elko, Merten compatible
• The best possible ecodesign rating (40%)
• CE certified, Bluetooth

INSTALLATION

• Connect the wires, fix the frame and frame adapter with the screw and push the knob in
• The thermostat automatically selects a mode. If a floor probe is connected at first startup
  • floor mode. Otherwise room thermostat mode.
• The thermostat indicates the mode for 4 seconds at each start-up. Red indicates a floor mode and green any other mode.

USING THE THERMOSTAT

• Select the setpoint with the knob
  • Mid position 21°C, in PWM mode 50% and in snow melting mode according to given parameters
• Switch into Standby mode by turning the knob to OFF

SETTINGS EASILY WITH MOBILE PHONE

IF an installer or user wishes, he can access the advanced functions with the free eco Control app

In Android phones app may ask you permission for Location Services. Please allow them. The app does not collect the location info but the use of Bluetooth requires that

USER PROGRAM

1. Select a thermostat
2. Modify your program
3. Save and accept

User program is ready! Also set AUTO mode from settings!

USER PROGRAM ON (AUTO)

• Comfort hour of user program. Setpoint is indicated and selected by the knob.
• Eco hour of user program. Setpoint is the reduced eco temperature set in the app.
• User can force the thermostat into eco mode with an external setback switch

Internal real time clock has a 2h backup. If the power break is longer, real time will be lost. IF the user program is in AUTO mode the thermostat will use the comfort setpoint until the next App connection, which automatically updates the clock. A corrupted time is indicated by alternately flashing LEDs and error code 10 in the App

IN THE EVENT OF A FAILURE, BOTH LED FLASH

MONITOR TEMPERATURE AND ENERGY COMSUPTION

THERMOSTAT SETTINGS

SNOW MELTING

WIRELESS TEMPERATURE SENSOR

WIRELESS ECO CONTROLS

PUBLIC SPACE LOCKING

HEATING POWER LIMIT

If necessary, the total instantaneous heating power of the thermostats can be limited, i.e. the average power during each hour is below the set limit

1. The system can have 2-20 thermostats
2. Wireless eco-controls must be enabled
3. The network key must be the same for all thermostats involved in the power limitation
4. For each thermostat, the power of the heater it controls and the maximum allowed network power are defined

Thermostats under power limitation are switched on and off randomly but evenly.

NOTE!
The power limiting function is available from version: Software V71 when the hardware is 4.0C Version information can be found on the INFO page of the phone’s application

QR-CODE

SAVE SETTINGS

Documents / Resources

| onninen 2601000 Combination Thermostat Tsense Flat [pdf] Installation Guide
2601000, Combination Thermostat Tsense Flat, Thermostat Tsense Flat, Combination Thermostat, Tsense Flat, Thermostat
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>