onninen OPAL CNH790 Sealed Industrial luminaire User Manual
- June 10, 2024
- onninen
Table of Contents
onninen OPAL CNH790 Sealed Industrial luminaire
Product Information
- The Sealed Industrial Luminaire is available in two variants:
- 1100 LM, 558 MM, IP65, CNH790
- 2160 LM, 1158 MM, IP65, CNH791
- The product is designed for industrial use and has a protection class of 2, which means that no protective conductor is necessary for safe operation. The light source and control gear are non-replaceable and operate on 230V. The lamp and its connecting cable should not be changed or modified in any way. The product should only be cleaned when turned off, and any cleaning agents should be kept away from current-carrying parts to avoid staining.
Product Usage Instructions
- Electrical installations should only be carried out by qualified electricians. Before proceeding with installation, the mains connecting cable must be de-energized (fuse turned off). The luminaire should not be operated if it or its connecting cable show visible signs of damage.
- To dispose of the product, do not dispose of it along with household waste. Instead, take it to a proper disposal facility. Information on waste disposal depots and their opening times can be obtained from your local authority. Faulty or used batteries must be recycled in accordance with Directive 2006/66/EC. Please return batteries and/or device to the specified collection points.
General Safety Information
Electrical installations may only be carried out by qualified electricians. Please note! Before proceeding with installation mains connecting cable must be de-energized (fuse turned off). Please note the following symbols and safety instructions, in order to avoid damage caused by incorrect assembly or use:
- Protection class 2: for lamps with this symbol no protective conductor necessary for safe operation.
- Changes: Do not make any changes to the lamp or its connecting cable.
- Commissioning: Do not operate the lamp if it or its connecting cable show visible signs of damage.
- Care advice: Only clean lights when turned off, do not allow any moisture into connecting areas or on current-carrying parts. Cleaning agents can cause staining.
Disposal
Do not dispose of the waste electric appliances together with household waste. In conformity with the directive 2012/19/EN on waste electrical and electronic equipment and its implementation in the national laws, waste electrical and electronic equipment should be collected separately and transferred for environmentally safe reuse. Recycling as an alternative to the requirement of return: the owner of the electrical and electronic equipment parting with the ownership is obliged to return it or to cooperate in the appropriate utilization of the equipment. For this purpose, the waste appliance may also be brought to a take-back station for disposal in accordance with the national recycling requirements and the legal acts concerning waste handling.This does not apply to the accessory parts and auxiliaries of the waste appliances, except for the electric components.
ADVICE ON DISPOSAL
- In the interests of environmental protection, when you have no further use for your product, do not dispose of it along with household waste, but take it to a proper disposal facility. Information on waste disposal depots and their opening times can be obtained from your local authority. Faulty or used batteries must be recycled in accordance with Directive 2006/66/EC. Please return batteries and/or device to the specified collection points.
INSTALLATION INSTRUCTION
ABOUT COMPANY
- Manufacturer: Onninen Oy, Työpajankatu 12, FI- 00580 Helsinki. Made in China. Dystrybucja w Polsce;
- Onninen sp. z o.o., Ul. Emaliowa 28, 02-295 Warszawa,
- www.onninen.pl
- Onninen sp. z o.o.
- jest częścią Grupy Kesko Oyj.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>