Circutor MyConfig Mobile App Installation Guide
- June 4, 2024
- Circutor
Table of Contents
MyConfig Mobile App
Installation Guide
MyConfig Mobile App
Registering a capacitor bank in the MyCircutor VAR Application note
-
Install the capacitor bank and put it in service as per the device’s instruction manual.
-
Once the bank is in service, turn on Bluetooth® on an Android device.
-
Download the MyConfig app from the Google Play Store.
-
Open the MyConfig app and select Computer C Wi-Fi.
-
Once Bluetooth® is on, scan for devices. The list will show a device named ComputerXXXX, where XXXX is the last 4 digits of the serial number of the Computer C Wi-Fi.
-
Pair the device via Bluetooth® by pressing “Start”. The PIN corresponds to the last 6 digits of the serial number (S/N)on the back of the Computer C Wi-Fi.
-
Go back to the application’s home screen and select scan devices. Select the ComputerXXXX that was previously paired via Bluetooth®.
-
Select edit ✎ to activate Wi-Fi on the device: enter the name of the Wi-Fi network (SSID) and its password.
-
Finally, register at www.mycircutor.com. Register the device using the ID or QR code on the back of the Computer C Wi-Fi. The bank is now connected to the VAR.
To download this manual, scan the QR code or go to www.circutor.com
CIRCUTOR SAT: 902 449 459 (SPAIN)
(+34) 937 452 919 (outside Spain)
Vial Sant Jordi, s/n
08232 – Viladecavalls (Barcelona)
Tel: (+34) 937 452 900
Fax: (+34) 937 452 914
e-mail: sat@circutor.com