RETROFLAG RF Handheld Controller for Switch Instruction Manual
- June 11, 2024
- RETROFLAG
Table of Contents
Handheld Controller for Switch
Instruction Manual
RF Handheld Controller for Switch
- Switch needs to be 3.0.0 or above. Go to System Setting — Controller and Sensors — turn on Pro Controller Wired Communication.
- The USB port can charge only when the Switch console is connected.
Turbo and Swap Buttons
Supported buttons: A. B. X. Y. L. R. ZL, ZR, L3, R3
Turbo
Press and hold TURBO button, then press the button you would like to set
Turbo. The controller vibrates when Turbo is activated.
Auto-Turbo
Press and hold TURBO button, then double press the button you would like to
set Auto-Turbo, Pause/Restart Auto-Turbo function via press the button you
set. The controller vibrates twice when Auto-Turbo is activated.
Swap buttons
Press and hold the two buttons you would like to swap, then press TURBO
button. The controller vibrates when Button Swap is successful.
Deactivate Turbo / Auto-Turbo / Swap functions
Press and hold TURBO button, then press the activated button. The controller vibrates when the cancellation is successful.
- Can’t set Turbo and Swap functions on one button at the same time.