rizoma BS211 Quantum End Rearview Mirror User Manual
- June 4, 2024
- rizoma
Table of Contents
BS211 Quantum End Rearview Mirror
User Manual
BS211 Quantum End Rearview Mirror
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you on your excellent choice. Please carefully follow the instructions in this
guide, which will allow you to mount and use the product correctly and enjoy
all the features it has. For your protection and safety, RIZOMA expressly
recommends that you have the installation of the product performed by skilled
personnel. Improper installation, repair or maintenance, can cause accidents.
Keep this user guide as a reference for the future. RIZOMA accepts no
liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or with additional
regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, as to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking,
bent, deformed, cracked, chipped or worn, no matter how slight, immediately
have a RIZOMA dealer inspect the products before you ride again. In any case,
never try to repair
or modify the Rizoma products or their components, always replace them with
Rizoma’s original components. Rizoma products may be not compatible with your
motorcycle or with other aftermarket equipment installed before.
For your safety Rizoma suggests to always contacting your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Specchietto “QUANTUM END”Mirror “QUANTUM END”
PART NUMBER BS211
The Quantum End mirror is made from billet aluminum using 3D precision
machining and it undergoes surface anodization which ensures quality and
durability. Its unmistakable design and convex anti-dazzle mirror help widen
the field of view. This product sets a new standard in mirror design with its
thickness, reduced up to 5 mm. What’s more, its adjustment system has been
designed to maximize versatility.
PART NUMBER BS211 Before you start mounting the product please check
the completeness of the kit on the part list. The difficulty level and the
time of assemblage shown do not include the removal of OEM components.
Warning: Make sure that your motorbike is standing firmly before you
start work, as a fall may lead to damage to the motorbike or injury to you or
others, also make sure that the temperature of the exhausts and the engine is
similar to the ambient temperature.
WARNING: TO CLEAN YOUR DETAILS OF THE KIT DON’T USE DETERGENT, AGGRESSIVE
PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR DETAILS BUT USE
ONLY NEUTRAL DETERGENT WITH COLD WATER.
Some of our products may not be approved for road circulation in the countries
where homologation is required. Thus IZOMA®srl declines any responsibility
for a different
use of its products. MONTAGGIO SPECCHIETTO CON MANUBRIO FILETTATO
Step 1
Aril-747MM: TH THE HANDLEBAR VLITHOUT Mi6 THREADS BUY THE LP200 KI T.
Step 2
MONTAGGIO SPECCHIETTO LATO
WARNING: FOR THE CORRECT MOUNTING OF THE RIGHT SIDE CHECK THAT BETWEEN
THE MIRROR AND THE THROTTLE GRIP THERE IS MINIMUM 1 mm.
Step 4
Find the correct position of the mirror and tighten the screw 1.
REGOLAZIONE SPECCHIETTO ADJUSTMENT MIRROR
Step 5
MONTAGGIO TAPPO IN PLASTICA INSTALL PLASTIC CAP
Step 6
WARNING: USE THE FURNISHED CAPS TO CLOSE THE HOLE FIXING OF THE OEM MIRROR.
Avvertenze Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy. All riders are strongly urged to take a motorcycle rider
safety clinic. Always wear a properly fitted and fastened motorcycle helmet
(RIZOMA recommends a full face helmet), that has been approved by ANSI, SNELL,
CE, or any other relevant authority, and any other safety equipment necessary
for your riding styles, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries
where homologation is required.
Thus RIZOMA® srl declines any responsibility for different use of its
products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>