rizoma AZ430 Pair Of Universal Risers User Manual
- June 4, 2024
- rizoma
Table of Contents
rizoma AZ430 Pair Of Universal Risers
User Manual
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding. Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leak-ing, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your safety Rizoma suggests to
always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Consult the website www.rizoma.com, click on the AZ430 page the section “MEDIA”, to download the TUV approval document in PDF format.
Riser kit
Before you start mounting the product please check the completeness of the kit
on the part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components.
Warning: Make sure that your motorbike is standing firmly before you
start work, as a fall may lead to damage to the motorbike or injury to you or
others, also make sure that the temperature of the exhausts and the engine are
similar to the ambient temperature.
WARNING: TO CLEAN YOUR DETAILS OF THE KIT DON’T USE DETERGENT, AGGRESSIVE
PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR DETAILS, BUT USE
ONLY NEUTRAL DETERGENT WITH COLD WATER.
After installation, completely turn handlebars from left to right and back
again, several times. Make sure the handlebars move freely and without
obstruction. Check all the throttle, brake and clutch cables, hydraulic lines
and electrical wires to make sure they are not limiting the movement of the
handlebars, and that they are not binding or becoming kinked or caught in
anything. Make sure that all components of your motorcycle continue to
function properly. Improper handlebar riser installation could lead to
throttle, brake or clutch malfunction and loss of motorcycle control,
resulting in an accident, personal injury or death. Be sure that the nominal
diameters of your handlebar risers and handlebars at the clamping point are
the same. Do not force the handlebars and risers together. The handlebars and
risers should rest together easily and at the clamping point, without any
play. If you have any doubt whatsoever, please see your authorized RIZOMA
dealer. Failure to properly match the diameters of the handlebar risers and
handlebars and clamps could cause the handlebars to fracture, resulting in
loss of motorcycle control, an accident, personal injury or death.
INSTALL FOR YAMAHA XV950 MODELS
Step 1
ATTENTION: TO INSTALL THE RISERS, ON THE YAMAHA XV950 MODELS, INSERT THE FURNISHED BUSHINGS IN THE HOLES OF TRIPLE TREE AND DONT USE THE OEM WASHER.
SOLUTION OF INSTALL
Step 2
ATTENTION: FOR THE CORRECT INSTALLATION OF THE RISERS CHECK THE SUPPORT SURFACE OF THE TRIPLE TREE.
SOLUTION OF INSTALL
Step 3
ATTENTION: FOR THE CORRECT INSTALLATION OF THE RISER RESPECTED THE |MEASURE A OR B. MEASURE A MINIMUM THREADS OF SCREw IN THE RISER; MEASURE B MAXIMUN THREADS OF SCREW IN THE RISER
ADJUSTMENT RISER
Step 4
- Rotate of 180° the bottom part of risers, the handlebar is adjustable 5 mm forward or back in comparison to the axis of rotation.
- Both the bottom parts of risers must be assembled the same offset.
ALIGNING THE RISERS
Step 5
NSTALL HANDLEBAR
Step 6
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
- Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>