Oilsky M7 90 Hours Playback MP3 Player Built in 32GB Bluetooth User Manual

Oilsky M7 90 Hours Playback MP3 Player Built in 32GB Bluetooth

Product Information:

• Product Name: MP3 Player M7
• Manufacturer: Oilsky
• Manufacturer Website: www.oilsky.com.cn
• After Sales Service Email: oilskyservice@hotmail.com

Product Usage Instructions:

Charge the Player:

1. Use 5V 1A Charger: Only use the 5V 1A charger provided for charging to prevent product failure. After fully charged, disconnect the cable from your device by pulling it straight outward.
2. Charge by Computer: Connect the device to a running computer using the included charging cable.

Note: If the player is not used for a long time, it is recommended to charge the battery at least once every 2 months.

Quick Guide:

• Power On/Off: Hold the power button for about 3 seconds to turn the player on. Repeat the same action to turn it off.
• Return to Music Playing Interface: On any other interface, press the button labeled “One button returning to music playing interface” to get back to the music playing interface.
• Return: While on the playing interface, press the button labeled “Return” to exit.
• Volume Adjustment: Click the +/- buttons on the right side to increase or decrease the volume.
• Data Transfer: Use the supplied charging cable to connect your computer and copy media files as if it was a flash drive.
  Alternatively, you can use music management software such as Windows Media Player to transfer files (not compatible with iTunes).

Main Functions:

To access the music function, press the button with “Music” on the main interface. Then use the button labeled “Next/Forward” to choose different functions including All songs, Now Playing/Last played, Artists, Albums, Genres, Playlists, and Update Playlist.

Operations on Music Playing Interface:

prefer
Press the button| Return to the previous menu
Press the button| Play the previous song
Press the button| Play the next song
Press the button| Pause/Play the music
Hold the button| Rewind the current playing song
Hold the button| Fast forward the current playing song

Music Format:

Steps to Set A-B Repeat Mode:

1. On the music playing interface, press the button labeled “Next/Forward”. Select Play mode > Repeat settings > Repeat mode. Letter “A” will start flashing at the bottom of the screen.
2. Press the button labeled “Next/Forward” to choose the start position. Letter “B” will start flashing. Press the same button again to stop letter “B” from flashing. The AB repeat mode is now set successfully. The player will only play the sound you just set  until you press the button again to cancel the repeat mode andresume normal playback.

Attention:

1. Only 4000 music tracks can be displayed in the music lists.
   Please go to the folders to find the complete tracks.

2. If your computer cannot detect the MP3 Player, please update your USB driver to version 2.0 or try using another cable. If the issue persists, please contact Oilsky Technical Support for assistance.

3. To better organize your music or audio, it is recommended to create folders on your PC/Mac and sort them instead of relying on the default playlists. Once done, you can play music from the respective folders.

Instruction of Buttons

1. Earphone jack
2. Type-C port
3. TF card slot
4. Return
5. Return
6. Menu button
7. Previous/Rewind
8. Next/Forward
9. Play/Pause
10. External speaker
11. Power ON / OFF
12. Volume up
13. Volume down
14. Hanging hole

Charge the Player

1. Use 5V 1A Charger
   Use only the 5V 1A charger for charging or it may lead to product failure. After fully charged, disconnect the cable from your device by pulling it straight outward.

2. Charge by Computer
   Connect the device to a running computer via the included charging cable.
   Note: If not used for a long time, you are supposed to charge the battery at least once every 2 months.

Quick Guide

• Power on, off
  Hold the power button for about 3s to turn the player on. Repeat to turn it off.

• One button returning to music playing interface
  On any other interface, press this button to get back to the music playing interface.

• Return
  While on playing interface, Press the button to exit.

• Volume Adjustment
  Click the button +/- on the right side to increase/decrease the volume.

• Data Transfer
  Using the supplied charging cable, connect your computer and copy over media files as if it was a flash driver or use music management software such as Windows Media Player to transfer the files (not work for iTunes).

Main Functions

Music
Press the button with “Music” on the main interface to access its function, then press button to choose each functions including All songs, Now Playing/Last played, Artists, Albums, Genres, Playlists, and Update Playlist.

Operations on music playing interface

function you preferred
| Press the button| Return to previous menu

| Press the button| Play the previous song

| Press the button| Play the next song
**| Press the button| Pause/Play the music

| Hold the button| Rewind the current playing song
**| Hold the button| Fast forward the current playing song

Music format

Steps to set A-B Repeat mode:

1. On the music playing interface, press the button Select Play mode > Repeat settings > Repeat mode. Letter A now starts flashing on the bottom of the screen.
2. Press the button to choose the start position, Now letter B starts flashing, press the button and letter B stop flashing. Now AB repeat mode set successfully. And the player will only play the sound you just set until you press the button ****again to cancel the repeat mode and resume normal playback.

Attention:

1. ONLY 4000 music tracks can be displayed in the music lists, please go to the folders to find the complete tracks.
2. If your computer cannot detect the MP3 Player, please update your USB driver to 2.0 version or try another cable. If still won’t work please get in touch with Oilsky Technical Support for help. (See cover)
3. To better sort your music or audio we recommend you create some folders on your PC/Mac to sort them instead of the 3 default playlists. After it’s done. Play music from “ Folder ”.

Bluetooth
How to pair M7 with Bluetooth speaker or Bluetooth headset?

1. Turn on the Bluetooth speaker or Bluetooth headset and turn on the bluetooth mode.
2. Turn on the Bluetooth mode of M7, then choose “searching for device” to find available Bluetooth device around.
3. Go “Device List” and choose the Bluetooth device you want to pair, press the button to confirm to pair.
4. Once the bluetooth connection is done, you will find a green Blutooth icon on the screen.

Attention:

1. The M7 cannot pair with Smart Phones.
2. Must select Bluetooth to reconnect with your Bluetooth device if you turned off the MP3 Player last time.
3. If you have connected your Bluetooth earphone with your mobile phone , please disconnect them before pairing with the M7, or the connection would be a failure.
4. When listen to radio by Bluetooth, wired headphones are needed as radio antenna

FM Radio
Press the button with “ FM radio ” on the main interface to access to the radio playing interface, press to its sub menu:
Steps to start FM radio recording:

1. On the radio playing interface, press the button and choose “ Start FM radio recording, press the button enter to the recording interface, press the button to exit and confirm whether to save the recording or not.
2. On radio playing interface, press the button and choose “FM recording file” to select each file to play as you wish.

Steps to select different FM band：
On the radio playing interface, press the button and choose “ Tuner Region ” to set each FM band as you wish:

• Common Band：87.5 MHz ~ 108.0 MHz
• European Band：87.5 MHz ~ 108.0 MHz
• Japan Band：76 MHz ~ 90 MHz

Attention:

1. Wired headphones are required as antenna for FM radio function.
2. Plug in wired headphones when play FM radio in Bluetooth Mode.

Recorder
Press the button with “Recorder” on the main interface, then press buttons to select each function.

Record format & bitrate

768kbps
1024kbps
1536kbps
3072kbpsc

How to record from Line-in?

1. Connect the mp3 player with smartphone or audio device by 3.5 mm AUX cable
2. Select Recorder > Record from > Line in
3. Press the button to go back, then select Start voice recording
4. After saved the file, you can play it from Recording library.

Settings

Press the button with “Settings” on the main interface, then choose or set each function here. Points need to know below:
Sleep timer:
1 to 99 Minutes: Regardless of whether it is operated or not, the machine auto- shutdown when the time reaches the specified time you set. Press the button to save the setting.
Power management:
1 to 99 Minutes: No music being played, the machine automatically shut down when there is no operation in the time you set. Press the button to save the setting.
Date and time:

• Time settings: Set the time format you want (12-hours / 24-hours).
  Press the button to save the settings.

• Date settings: Set the date format you want ( MM DD YYYY) etc.
  Press the button to save the settings.

Format device:
Before you choose to format the device, please remember to back up all your files, otherwise, you will no longer get them back.

Folder
MP3 and micro SD card’s memory will be sorted by edit time, the first file be dropped in will be listed at the top. If you renamed the file or do some other modifications, the file goes to the bottom of the list. This trick only works for “Folder” , not “Music” .
Ways to sort audio in alphabetic order.

1. Prepare your audio book files on PC/MAC.
2. Make sure these files are in correct order by file name. Such as “01 xxx”, “02 xxx”…”50 xxx”.
3. Now plug in your mp3 player and ready to transfer.
4. Create a folder in mp3 player and name it as you wish.
5. Select all audio files and do not copy or cut.(Important)
6. When all files are being selected, move your mouse above the first audio file (ie “01 xxx”) and then right click and copy. (Important)
7. Paste these files to your mp3 player folder, make sure all files are pasted in right order. Otherwise delete them all and redo step 5.
8. Unplug the mp3 player, and go to the folder with files, they should be in correct order.

Tools

• Stopwatch
• Clock
• Calendar
• Pedometer

Support and Troubleshooting

How to transfer music to the mp3 player?
A: Download music to your computer first, and then connect mp3 player with your computer thru charging cable. A new disk will pop on as flash driver, and drop all your musics to the disk. You can create folders in the disk to sort your music.
Q: Why my computer can’t recognize the MP3 player?
A: Oilsky Mp3 Player can be paired with latest USB driver for all computer system. Please update your USB driver to 2.0 version before connecting the MP3 player or try another charging cable. If you still cannot connect the player to your computer, please contact Oilsky customer service for further help (see cover).
Q: How to insert the SD card into the card slot successfully?
A: Push it in with your fingernail tip till you hear a “Click! “, Push again and the card will pop back out of the SD card slot.
Q: How the key lock turns on and off ?

1. A: 1. Long press the menu button for 3 seconds to open the protection lock .
2. 2. When the protection lock icon appears on the screen, you can unlock the device by long pressing the menu button for 3 seconds.
   

Specifications

References

• Oilsky

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>