EVOLVEO Detective DB IP Cameras Instruction Manual
- June 16, 2024
- Evolveo
Table of Contents
- EVOLVEO Detective DB IP Cameras Instruction Manual
- The Detective DB installation box is designed for EVOLVEO
- Detective products only:
- Features:
- Assembly:
- Warning:
- All rights reserved.
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EVOLVEO Detective DB IP Cameras Instruction Manual
The Detective DB installation box is designed for EVOLVEO
Detective products only:
SEA DET-POE8DOM SEA DET-POE8CAM SEA DET-WIP
SEA DET-WNSCAM SEA DET-IP8
SEA DET-WNS
SEA DET-POE8
| EVOLVEO Detective POE8 SMART camera antivandal POE/ IP
EVOLVEO Detective POE8 SMART camera POE/ IP
WiFI IP Camera EVOLVEO Detective WIP 2M
SMART
EVOLVEO Detective WN8 SMART spare wireless bullet camera
NVR security system EVOLVEO Detective IP8
SMART
NVR wireless security system EVOLVEO Detective WN8 SMART
NVR security system EVOLVEO Detective POE8 SMART
---|---
Features:
Material: Aluminium & SECC Dimension: φ94,5x33mm Thread for grommet: M22x1.5
Operating temperature: -40ºC ~60ºC Humidity: 0~90% RH
Max. load: 1.0Kg Weight 0.22Kg Colour: White
Assembly:
-
Disassemble the installation box using the three screws on thelid.
-
There are three pre-prepared holes on the underside of the box for fixing to the base material.
-
Mark the holes to be drilled on the substrate material, the gasket can be used as a template.
-
Insert the self-adhesive gasket between the box and the mounting surface and tighten the screws.
-
Select a suitable grommet and pull the necessary supply wires into the installation box.
-
Pull the camera cabling through the center hole and use the supplied gasket to prevent dirt from entering the installation
-
Place the camera at the most suitable pitch on the box lid and tighten Do not use excessive force and always keep the screw perpendicular to the lid to avoid damaging the threads
-
Finally, screw the lid to the box using the screws provided
Warning:
- Always make sure that the surface on which you screw the box is perfectly flat. If mounting on an uneven surface, the body of the installation box may deform or crack when tightened.
- The box is manufactured to minimize the ingress of dust, liquids or insects, while maintaining proper installation. In case of improper use or modification of the box, the manufacturer is not liable for any damages.
- The installation box is not intended for wiring, it cannot be used as a distribution box or for any other similar use.
Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic
Copyright © Abacus Electric, s.r.o. www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved.
The appearance and technical specifications of the product are subject to change without notice.