EVOLVEO Grafico T12 Graphics Tablet Instruction Manual

EVOLVEO Grafico T12 Graphics Tablet

Dear customer, thank you for choosing EVOLVEO Grafico T12. We trust that the product will serve you to your full satisfaction.

Important information

This manual contains the steps for daily operation, setup and installation of the EVOLVEO Grafico T12. The drivers needed to install the device are stored inside the device. Contents of the package

• EVOLVEO Grafico T12, graphic tablet
• Wireless pen
• Spare tips – 30pcs
• USB
• User manual
• Micro-USB OTG adapter
• USB C OTG adapter
• Wireless pen case
• Ring for removing spikes
• Work surface foil
• Gloves size L

Overview

1. Rubber
2. Brush
3. Ctrl-
4. Ctrl+
5. Brush-
6. Brush+
7. Mouse wheel up
8. TAB
9. Mouse wheel down
10. Spacebar
11. Ctrl
12. Alt
13. Work area
14. Work area – telephone

Multimedia key function (PC only)

1. Mute
2. Volume-
3. Volume+
4. Player
5. Start / Pause
6. Previous
7. The following
8. Browser
9. Calculator
10. Plocha

Remark: When the wireless pen touches the graphics tablet’s work area or the wireless pen button is pressed, the LED lights.

Remark: Keys 1-12 can be reconfigured to suit your use. Changing the function cannot be done on Android.

Wireless pen

1. pro key –
2. key for +
3. wireless pen tip

Remark: The key for “-” can be adapted to your needs. See the driver interface for details.

Remark: No need to charge the wireless pen or use the battery.

Replacing the spikes

1. Grasp the nib with the ring and pull it out of the pen
2. Insert and press the new nib into the pen

Connecting
Connect the graphics tablet to the PC USB 2.0/3.0 port. Do not use the front USB ports of your PC to connect.

1. USB connection to PC
2. USB connection to laptop

Connect to your Android phone
Android phone/OTG adapter/USB cable/graphic tablet

Important: Please turn off the screen rotation function on your phone before connecting.

Important: Please make sure that your phone supports OTG and this feature is enabled.

Procedure

1. Connect the OTG adapter to your Android phone
2. Connect the USB cable to the OTG adapter
3. Connect the USB cable to the EVOLVEO Grafico graphics tablet

Wireless pen settings (Windows only)

1. PC and graphics tablet connection status
2. Screen mapping: The ability to set the screen and desktop mapping area of a graphics tablet.
3. Wireless pen pressure: Level from 0 to 8192. The curve shows the level of pressure exerted on the graphics tablet by the wireless pen.
4. Fine-tuning of pressure: It serves to slightly adjust the pressure. Default: 0. The change can be seen to the left of the pressure curve.
5. Wireless pen keys set: Adjustable function of the “-” key. Default: Ctrl+z. The function of the “+” key is set as the right mouse button.
6. Adjustable keys
7. In case of problems, contact technical support.
8. Restore drivers to factory settings
9. Default: not selected

Specifications

Installing drivers

Instalace pro Windows

1. After connecting the graphics tablet to your PC, wait a few minutes. Then open “This computer” and then the CD-ROM (J). Run the ” Grafico Drivers.exe” file to install the drivers
2. Follow the installation instructions step by step.
3. In the last driver installation window you will be asked if you want to download the “Paint Tool SAI” graphics program. Select whether you want to install the program.
4. Select a path to save the download.
5. Once the download is complete, run the “sai.exe” file and follow the steps to install the program.
6. The installation is complete after the icons of the installed programs appear on the desktop.

Remark:

• Do not use a USB HUB or USB extension cable to connect to your PC.
• When not in use, do not allow the pen tip to touch anything, and avoid dropping the pen from a height.
• Avoid disorderly mouse cursor movement or movement without action. Do not use two or more graphics tablets at the same time.
• Please turn off the flicks function in Windows 7.

Installation for MAC OS

1. After connecting the tablet to your Mac device, locate the “Pen Driver” folder and open it.

2. Open TabletDriver.DMG

3. Open MyTablet.pkg

4. Select the installation path and then “Install” to start the installation.

5. Enter your password and continue with the installation.

6. After successful installation, you will be prompted to restart your device.
   Remark: After installing the driver, make the following settings

7. Open your MAC OS settings. Search for “Security & Privacy Option”.

8. Select the unlock option.

9. Check to enable MyTabletDaemon.

The MAC OS drivers have been successfully installed. Please restart the system.

Important: The app is constantly being updated and developed, individual steps may vary after updates. In case of any problems with the procedure, we recommend contacting the service center.

Technical support
Contact EVOLVEO Technical Support www.evolveo.com/helpdesk/

The warranty is NOT valid for:

• sing the device for other purposes
• installing firmware other than that installed in EVOLVEO Grafico T12 or that can be downloaded manually or automatically from the application
• electromechanical or mechanical damage caused by improper use
• damage caused by natural elements such as fire, water, static electricity, surges, etc.
• damage caused by unauthorized repair

Disposal

The crossed-out container symbol on the product, in the literature, or on the packaging means that in the EU all electrical and electronic equipment, batteries, and accumulators must be placed in a separate waste stream at the end of their useful life. Do not dispose of these products in unsorted municipal waste.

DECLARATION OF CONFORMITY

Abacus Electric, s.r.o. hereby declares that the EVOLVEO Grafico T12 complies with the requirements of the notes and regulations applicable to this type of instrument. The full text of the Declaration of Conformity can be found at http://ftp.evolveo.com/CE/  Copyright © Abacus Electric, s.r.o.www.evolveo.com   www.facebook.com/EvolveoCZ Importer

Abacus Electric, s.r.o.

Planá 2, 370 01, Czech Republic Producer

Naya Limited
No.5, 17/F, Strand 50, 50 Bonham Strand, Sheung Wan, Hong Kong Made in China All rights reserved. Design and specifications are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>