ring 169PWRPACK Power Pack Backup Power User Guide

ring 169PWRPACK Power Pack Backup Power

Ring Power Pack

The first time you use your Ring Power Pack, you need to plug it directly into an electrical outlet to charge it.
Note: The Power Pack does not con1e with its own power adapter. Use the Alarm Pro USB-C power adapter.

Installation instructions

1. Plug the power adapter from your Ring Alarm Pro into the Power Pack1s orange Power In port.
2. Wait a few seconds for the Power Pack LED light to turn green. Solid green means ifs charging. When it’s fully charged, the LED turns off.
3. Connect the Power Pack to your Alarm Pro using the short, double-sided USB-C cable Match the blue and orange connector ends to the correct Power In (orange) and
4. Power Out (blue) ports. The Power Pack will finish charging while it’s connected to your Alarm Pro. You can check on the Power Pack battery status using the Ring app. Tap on the Alarm Pro Base Station device page, then tap on the Battery Health tile to see all connected Power Packs.

Powers eero wifi 6 Extenders

You can use these same steps to add a Ring Power Pack to an eero wifi 6 Extender (sold separately).

Battery backup

Link multiple Power Packs to your Alarm Pro for e tended battery backup during a power of age.

Need more information? Visit ring.com/alarm-pro
To download this manual visit ring.com/alarm-manual 2021 Ring LLC or, safe routes. Ring and all related marks are trademarks of ing LLC or its af Alta es. 22-003417

Important Product Information

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
WARNING: Ring Power Pack is suitable for use with Ring Alarm Pro (sold separately) or an eero 6 Wi-Fi extender (sold separately) only. The Ring Power Pack is designed to be charged with either the Ring Alarm Pro Power Adaptor or an eero 6 Extender Power Adaptor. Other charge methods should not be used and are not supported. Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them in again. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the device or adapter appears damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid the risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm. Your Ring Power Pack may get hot during normal use_ To reduce the effect of the warming, place your Ring Power Pack on a heat-resistant surface. If you find the device has become hot to the touch, unplug the power and let 1t cool down for a few minutes before handling.

BATTERY SAFETY

HANDLE WITH CARE. Your device contains a rechargeable lithium-ion battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, immerse or expose it to water or other liquids, or expose it to fire explosion or another hazard. Only use the battery for the system for which 1t is specified. The use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or another hazard. Do not short-circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.
Maintaining Your Ring Power Pack
The use of third-party accessories may impact your device’s performance. In limited circumstances, the use of third-party accessories may void your device’s limited warranty. In addition, the use of incompatible third-party accessories may lead to damage to the device or the accessory. Read all safety instructions for any accessories before using your Ring Power Pack.
Other Safety Considerations
Your device is shipped with a special USB-C cable interconnection cable. This cable is designed only to be used between a Ring Power Pack and Ring Alarm Pro or Ring Power Pack and eero 6 Extender. Do not use it for any other purpose. If the USB·C connector or cable appears damaged, discontinue use immediately. Replacement USB-C interconnection cables are available from ring.com.

PRODUCT SPECIFICATIONS

• Device Name: Ring Power Pack
• Model Number: SC28S2
• Electrical Rating: 12V DC, 3A
• Temperature Rating: 32°F to 104°F (0°C to 40°C)

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated Make sure you dispose of or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport.

References

• Home Security Systems - Cameras, Alarms, Doorbells | Ring
• Get Smart Security With Ring Doorbells, Cams & Security Systems
• Legal Information, Support & Resources | Ring
• Ring: Security Systems, Cameras, Alarms, and Smart Home Automation | Ring

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>