EVOLVEO ACSALMMSTS Alarmex Pro Sensor User Manual
- June 3, 2024
- Evolveo
Table of Contents
MANUAL
MODEL VERSION / DATE
ACSALMMSTS l. / 25. 3. 2022
ACSALMMSTS Alarmex Pro Sensor
EVOLVEO Alarmex Pro, wireless door/gate/gate detector
Thank you for choosing our product. Please read these instructions
carefully before use.
This product is only compatible with EVOLVEO Alarmex Pro, a smart wireless
WiFi/GSM alarm. Pair with the control panel according to the instructions in
the EVOLVEO Alarmex PRO user manual.
Installation
The door sensor consists of one magnetic strip and one transmitter, which is attached to the door (window) frame with either double-sided tape or screws.
Remark:
- The transmitter should be parallel to the magnetic strip and the two parts should be as close together as possible, the distance should not exceed 10 mm.
- We recommend using screws or a high quality adhesive for attachment.
- The gap between the magnetic strip and the transmitter should not exceed 10 mm and attach the magnetic strip to the right side of the transmitter. Only when a gap is created between them will the door sensor send an alarm signal.
- Open the door or window. If the indicator on the transmitter flashes, it means that the sensor is working normally.
Technical parameters
| Model | ACSALMMSTS |
|---|---|
| Working voltage | 12V (1* 23A battery) |
| Standby current | <5uA |
| Current on activation | 15mA |
| Transmission distance | <80m (without obstacles) |
| Wireless connection parameters | 433MHz |
| Dimensions | Transmitter: 642414mm |
Sensor: 105379mm
Magnet: 10515*15mm
Armoured hose: 360mm
Warranty and post-warranty service
Repairs and servicing can only be carried out at an authorized service point
for EVOLVEO products (more at www.evolveo.com ),
otherwise you may damage your mobile phone and lose your warranty.
Disposal: The crossed -out container symbol on the product, in the
accompanying documentation or on the packaging means that in EU countries, all
electrical and electronic equipment, batteries and accumulators must be
disposed of separately at the end of their useful life as separated waste. Do
not dispose of these products in unsorted municipal waste.
DECLARATION OF CONFORMITY
** The company Abacus Electric, s.r.o. hereby declares that the EVOLVEO
ACSALMMSTS telephone meets the requirements of the standards and regulations
that are relevant for the given type of equipment.
The full text of the Declaration of Conformity can be found at
http://ftp.evolveo.com/ce/
Importer**
Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic
Producer / Producer / Manufacturer / Gyártó
Naxya Limited No. 5, 17/F, Strand 50, 50 Bonham Strand, Sheung Wan, Hong Kong
Made in China
Copyright © Abacus Electric, s.r.o. www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved.
The appearance and technical specifications of the product are subject to
change without notice.