KOMIGAN KMG-4233 Intelligent LED Stair Lighting System User Guide
- June 2, 2024
- KOMIGAN
Table of Contents
KMG-4233
User Guide
Product Parameters
| O Product Name | Intelligent LED Stair Lighting System |
|---|---|
| O Brand | KOMIGAN |
| O Model No. | KMG-4233 |
| O Controller Voltage | DC 12-24V |
| O Wattage | Each Step < 15W, All Step < 300W |
| O Power Input | 100-240V |
| O Steps Quantity | Max 20 Steps |
| O Light Color | White (3000K/4000K/6000K optional ) |
| O Funtion | Adjust Mode/Step Number/Brightness/Speed/Delay time/Daylight Sensor |
| O Mode | ” Switch Mode” And “Sensor Mode” |
| O Sensing Range | 1.0-1.5m (40-60 inches) |
Controller Operation
Mode Setting
Long Press Controller ” Switch/Sensor” Key To Switch Mode (Or Long Press Wall Switch Panel “ON/OFF” And “Brightness” Key At The Same Time To Switch Mode)
| O Switch Mode | Control by switch panel. Lighting effect: synchronous type |
|---|---|
| O Sensor Mode | Control by sensor. Lighting effect: cascade type (lights turn |
on or off step by step)
Step Number Setting
Long press “Number” to enter step number setting, Press “+” and “-” to
increase/ decrease, long press “Number” to save and exit step number setting
Speed Setting
Short press “Speed” to adjust light turn on speed, 10 levels (Red indicator
light)
| o 1 | 150ms | o 2 | 250ms |
|---|---|---|---|
| o 3 | 350ms | o 4 | 450ms |
| o 5 | 550ms | o 6 | 650ms |
| o 7 | 750ms | o 8 | 850ms |
| o 9 | 1000ms | o 10 | 1200ms |
Time delay Setting
Short press “Time Delay” To Adjust Delay Time, 10 levels (Blue indicator
light)
| o 1 | 4s | o 2 | 6s |
|---|---|---|---|
| o 3 | 8s | o 4 | 10s |
| o 5 | 15s | o 6 | 20s |
| o 7 | 30s | o 8 | 50s |
| o 9 | 80s | o 10 | 120s |
Brightness Setting
Short/Long press “Brightness ” To Adjust Brightness, 10 levels (Green
indicator light) (Or Short/Long Press Wall Switch Panel “Brightness” Key To
Adjust Brightness)
| o 1 | 10% Brightness | o 2 | 20% Brightness |
|---|---|---|---|
| o 3 | 30% Brightness | o 4 | 40% Brightness |
| o 5 | 50% Brightness | o 6 | 60% Brightness |
| o 7 | 70% Brightness | o 8 | 80% Brightness |
| o 9 | 90% Brightness | o 10 | 100% Brightness |
Wireless Wall Switch Panel
ON/OFF Switch
Short Press “ON/OFF” key to turn On/Off led stair lights all the time, Invalid
in Sensor Mode
Brightness Setting Short Press “Brightness” Key To Adjust Brightness,
Total 10 Levels.
Long Press “Brightness” Key Mode Stepless speed regulation.
Stepless speed regulation.
Mode Switching Long Press The Two Key At The Same Time, Switch Between
Switch Mode And Sensor Mode .
Battery Installation
*Note: CR2032 battery for wall switch panel NOT included.
Strong Wireless Signal
Control the lights in the room evenoutside the room
(Outdoor:Suitable for open areas,the scope of use in non-
open areaswill be reducel)
Stick To Any Where You Want
Self powered remote control switch:
It can be placed or moved at will, or it can be fixedto your favorite
position.
Use double-sided stickers on one side to stick to the bottom of the switch.
and the other side to stick it where you like
Daylight sensor
Daylight Sensor OFF
Motion Sensor Work Both Day And Night The Daylight Sensor Must Expose To
Environment Light.
Daylight Sensor ON
6 Levels Lux Adjustable, Motion Sensor Work When Environment Light Is Darker
Than Lux Setting 
Motion sensor Installation
Motion sensor
Input Voltage Switch
Power Wiring Diagram
LED Light Strip Installation
Packing List
Installtion Diagram
|
---|---
https://www.amazon.com/live/video/084e3c744c68470d9c13806c4b6b30ec?ref_=asvh_vdp|
https://www.amazon.com/live/video/004350b101c34c66a70f9540eaede3bf?ref_=asvh_vdp
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance Ocm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>