GYMAX SP37743 Outdoor Basketball Hoop Instruction Manual

Basketball Stand
SP37743

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

Before You Start

Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

WARNING: IMPROPER INSTALLATION OR SWINGING ON THE RING MAY CAUSE SERIOUS INJURY OR DEATH
Installation Alert:
*To save your time and ensure your safety, please read the instructions carefully and check all the accessories in the package before installing, weighing, displaying and disassembling the basketball stand, master the installation steps and details before starting to install.

• This product requires at least 2 adult to install, please prepare 2 adjustable wrenches.
  *If there are any problems on the installation and use, please contact our customer service at any time. We will help you in time to reduce your trouble or damage to the product!

Safety instructions for use

To ensure safety, the user must read the instructions carefully before installation and use, and install, use, store, move and disassemble according to the instructions, so as to check the counterweight of the base before use, screw fastening conditions, to avoid causing any damage to the product and users!

1. Suggest two or more adults to install, and forbid children to install and climb.
2. Check the base for water leakage, screw fastening, small flow of water leakage may lead to product collapse.
3. The product is suitable for recreation and fitness, not for fierce competition. Do not dunk or hang vigorously.

After installation, the base must be filled with water or sand immediately to prevent collapse. Before use, the base must be laid flat on the ground to prevent collapse or sharp objects from damaging the base.
Warning

1. Do not climb or hang from hoops, backboards, or nets.
2. Do not use products with potential safety problems. If any parts need to be repaired or replaced, please contact our customer service.
3. Be very careful when moving on uneven ground, which may cause the product to roll over.
4. To avoid ice damage to the base, water in the base must be poured out or filled with sand when the temperature is below 0℃ (32℉).
5. If the product is used outdoors for a long time, please make sure the top of the main pole and elevator pole is covered with plastic to prevent rain from affecting the life of the product.
6. Please do not wear watches, necklaces, earrings and other jewelry, to prevent hanging hoops or lost in sports.
7. When adjusting height, keep your fingers away from moving parts.
8. Children are not allowed to move products or adjust their height.

Altitude control
Adjust 2 bolts (E) in the top pole (W) hole position to adjust the basketball frame height

Parts list

1. Install bottom pole, wheel shaft and wheel:
   As shown, place the base (O) on a chosen playing ground, the surface beneath the base should be horizontal. Insert the wheel shaft (J) into wheel (I), base (O) and end of bottom pole (Y) orderly. 

2. Install bottom pole, base and base support:
   As shown, fix one end of the pole braces (H) on bottom pole (Y) by bolt (G). Then fix another end of the pole braces (H) on base (O) by bolt (C).

3. Install ring and board bracket on the backboard:
   As shown, please bend the board bracket (K) into a Y shape before installation. Fix ring (L) and board bracket (K) on backboard (N) by spring screws (A) and bolts (B).

4. Install top pole to the board bracket:
   As shown, use bolts (D) to fix the top of board bracket (K) on the back of backboard (N) tightly. After that, insert top pole (W) into board bracket (K), fix them by bolts (E). Note: Angle screw mounting hole

5. Mounting to the base bracket:
   As shown, fix top pole (W) and middle pole (X) together by 2 pcs of bolt (F) . After that, fix middle pole (X) and bottom pole (Y) together by 2 pcs bolt (F).

6. Install the ball net

If the product does not need to be moved frequently, we recommend filling the base with sand instead of water. Because water freezes below 0℃ (32℉), it can damage the base. Note: however, that the sand can not be poured out after being loaded into the base.

Return / Damage Claim Instructions

DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box. Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

USA office: Fontana
AUS office: Truganina
GBR office: Ipswich
I TA office: Milano
POL office: Gdańsk
DEU office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FRA office: Saint Vigor d’Ymonville

Documents / Resources

| GYMAX SP37743 Outdoor Basketball Hoop [pdf] Instruction Manual
SP37743, SP37743 Outdoor Basketball Hoop, Outdoor Basketball Hoop, Basketball Hoop, Hoop
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>