Canon CT1-B012-C Interchangeable Lens Instruction Manual

June 16, 2024
Canon

Canon- logo

CT1-B012-C
© CANON INC. 2016
PRINTED IN MALAYSIA

Canon Interchangeable Lens Instructions

These instructions describe important safety notes for Canon interchangeable lenses and basic instructions on how to handle those lenses. For more detailed information, refer to the instructions for each lens. Instructions for your lens can be downloaded from the Canon website below: EF (EF-S) lenses, EF-M lenses, RF lenses
https://cam.start.canon/ 

Canon CT1 B012 C Interchangeable Lens - qr codehttps://cam.start.canon/

Refer also to the instructions for the camera.
Be sure the latest version firmware is installed in the camera.

Warning Details pertaining to risks that may result in death or serious injury.

  • Do not look directly at the sun or other strong light sources through a lens or a single-lens reflex camera with a lens attached. This may result in loss of sight.
  • Do not leave a lens in the sun without the lens cap attached. The lens may concentrate entering sunlight and cause a malfunction or fire.
  • Do not point a lens at the sun. Even when the sun does not appear on the screen, the lens may concentrate entering sunlight and cause a malfunction or fire.
  • Where the lens is equipped with a fixed tripod mount and the lens is mounted on a camera, make sure to properly support the lens. If you hold only the camera, the lens may fall off the camera and cause a malfunction or injury.
  • Where the lens is equipped with a detachable tripod mount, ensure that the tripod mount is securely attached to the lens body. If the tripod mount is not secure, the lens may fall off the tripod mount and cause a malfunction orinjury.

Caution Details pertaining to risks that may result in injury or damage to other objects.

  • Do not leave the product in places exposed to extremely high or low temperatures. The product may cause burns or injury when touched.
  • Do not insert your hand or fingers into the product. This may result in injury.
  • When using lenses equipped with Macro Lites, do not hold the Macro Lites close to the eyes or stare at them when they are illuminated. Doing so may result in eye damage.
  • Only mount the product on a tripod that is sufficiently sturdy.

Attaching and Detaching a Lens
Attaching the Lens
Align the lens mount indexes on the lens and the camera body and then turn the lens clockwise.
Detaching the Lens
Hold down the lens release button on the camera and turn the lens counterclockwise.
Refer to the camera’s instructions for details on attaching and detaching a lens.
Shooting Using Autofocus (AF)

  • To shoot images using autofocus, set AF as the focus mode.
  • To shoot images using manual focus, set MF as the focus mode and focus by turning the focusing ring.

To set the focus mode, use the focus mode switch on the lens (AF/MF), or set it on the camera ([AF/MF]).
Using the Image Stabilizer

  • To use image stabilization, set the Image Stabilizer to ON.
    To set image stabilization, use the Image Stabilizer switch on the lens (ON/OFF), or set it on the camera ([ON/OFF]).

Canon CT1 B012 C Interchangeable Lens -

Attaching a Lens Hood
Align the hood with the edge of the lens and turn the hood clockwise to attach it.

Using the Control Ring

This only applies to RF lenses equipped with a control ring.
To use the control ring on a lens equipped with a focusing/control ring, set the focusing/control selector switch on the lens to CONTROL, or set it on the camera.
Refer to the camera’s instructions for information on using the control ring.

Nomenclature

  1. Lens mount index

  2.  Focus mode switch

  3.  Focusing ring

  4.  Zoom ring

  5.  Image stabilizer switch

  6.  Image stabilizer mode selector switch
    MODE 1 : Corrects vibrations in all directions.
    MODE 2: When you take a panning shot either horizontally or
    vertically, corrects vibrations at right angles to the
    direction of panning.
    MODE 3: Corrects vibration only during exposure.

  7. Focusing distance range selector switch
    Selects the focusing distance range.

  8. Tripod mount (fixed-mount type)
    Used to attach a tripod or monopod.

  9.  Tripod mount (detachable tripod type)
    Used to attach a tripod or monopod.

  10.  Lens-retraction switch
    Push the switch in the “ ” direction while turning the ring to set
    the lens to the ready position.

  11.  Lock release switch
    Push the switch in the “ ” direction while turning the ring to set
    the lens to the ready position.

  12. Macro Lite ON button
    Used to change the Macro Lites illuminated patterns.

  13.  Macro Lites
    Illuminate the subject

  14. Lens cap

  15. Dust cap

  16. Hood (bayonet type)

  17.  Hood (screw type)

  18.  Control ring

  19.  Focusing/control selector switch

  20. Focusing/control ring

Canon CT1 B012 C Interchangeable Lens - Attaching a Lens
Hood

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  •  Consult the dealer or an experienced radio/TV technician for help.

Specifications

Lens

Focal Length| 10-18 mm (equivalent to 16-29 mm in 35 mm format)
Maximum and Minimum Aperture| f/4.5 – f/32
Lens Mount Type| RF Mount
Compatible Cameras| Canon EOS R-series, full-frame and APS-C
**Minimum Focusing Distance**| AF: 0.14 m / 5.5 in. (at 10-18 mm)

MF: 0.086 m / 3.4 in. (at 10 mm)

**Maximum Magnification| AF: 0.23x (at 18 mm) MF: 0.5x (at 10 mm)
****
Field of View, at Minimum Focus Distance| AF: Approx. 165 × 110 mm / 6.5 x 4.3 in. (at 10 mm) to approx. 96 × 64 mm / 3.8 x 2.5 in. (at 18 mm) MF: Approx. 45 × 30 mm / 1.8 x 1.2 in. (at 10 mm) to approx. 96 × 64 mm / 3.8 x 2.5 in. (at 18 mm)
Angle of View (Diagonal)| Approx. 107° 30’– 74° 20′
Optical Design
Lens Construction| 12 elements in 10 groups
Special Elements| 2 UD lenses and 1 aspheric lenses
Lens Coating| Canon SSC (Super Spectra Coating)
Filter Size Diameter| ø49 mm
Aperture Blades**| 7


Image Stabilization

| 4.0 stops correction with In-lens Optical Image Stabilization (6.0 stops correction with EOS R series in-body coordinated Image stabilization)
Focusing
Focusing Drive System| Canon STM (Leadscrew type STM)


Full-time Manual Focusing

| Yes (Supports both ONE SHOT AF and SERVO AF with compatible EOS R-series cameras)
**Dual Pixel CMOS AF Coverage (Horizontal x Vertical)| • EOS R — Approx. 80% x 80%
• EOS R5 — Approx. 80% x 80%
• EOS R7/R10 — Approx. 100% x 100%
• EOS R100 — Approx. 100% x 100%
Exterior Design
****
Focusing / Control Ring| Yes (Does not have a focusing/control selector switch, camera menus are used to switch between the focusing ring and control ring. On cameras that do not sup- port the above menu-based switching, this ring only operates as a focusing ring — EOS R, RP, Ra, R5, R6)
AF/MF Switch| No
MF / Control Ring Switch**| No
---|---


Distance Scale

| None (Electronic distance scale possible in viewfinder or LCD monitor, with compatible EOS R-series cameras)
Distance Limiter Switch| None
Dust / Weather Resistant Construction| None
Dimensions, Weight
Maximum Outer Diameter x Length| Approx. ø2.7 in. (ø69mm) x 1.8 in. (44.9mm) (retracted)
Weight| Approx. 5.3 oz. / 0.33 lbs. / 150g
Accessories
Lens hood| Canon Lens Hood EW-53B (not bundled, sold separately)
Lens Cap| Canon Lens Cap E-49 (Bundled)
Dust Cap| Canon Lens Dust Cap RF (Bundled)
Lens Case| Canon Lens Case LP814 (not bundled, sold separately)
Extension Tubes| None (No Canon RF mount extension tubes)
Close-up Lenses 250D / 500D| Not compatible
Canon RF Extender 1.4x/2x| Not compatible
Canon Gelatin Filter Holder III/IV| Not compatible

Canon CT1 B012 C Interchangeable Lens - Attaching a Lens
Hood1

Canon CT1 B012 C Interchangeable Lens - Attaching a Lens
Hood2

CANON® EF Lens and Accessories Limited Warranty­
For U.S.A. & Canada Only

The limited warranty set forth below is given by Canon U.S.A ., Inc. (Canon U.S.A.) in the United States or Canon Canada, Inc. (Canon Canada) in Canada with respect to the Canon brand EF Lens. as well as with respect to the accessories packaged with this limited warranty (collectively the “Products”), when purchased and used in the United States or Canada. The Products are the only Products to which this limited warranty applies.
THIS WARRANTY DOES NOT COVER ANY ACCESSORIES NOT MENTIONED ABOVE. This limited warranty shall only apply if the Products are used in conjunction with compatible computer equipment and compatible software, as to which Items Canon U.S.A. or Canon Canada shall have no responsibility. Non-Canon brand equipment and software that may be distributed with the Products are sold “as is” and without warranty of any kind by Canon U.S.A. or Canon Canada, Including any Implied warranty regarding merchantablllty or fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with the respect to such non-Canon brand items is given by the manufacturer or producer thereof.
This limited warranty covers all defects encountered in normal use of the Products, and does not apply in the following cases:
(a) Loss or damage due to neglect and/or abuse causing deterioration, mishandling, accident or failure to follow operating instructions.
(b) If a Product is defective as a result of leaking batteries or damage due to water or other liquid.
(c) Defective materials or workmanship where the defect is due to a Product having been serviced or modified by other than Canon or a Canon authorized service provider.
(d) Malfunction resulting from the use of acC~,SSOries, attachments, supplies, parts or devices (including, without limitation, batteries, film, flash attachments and other accessories) that do not conform to Canon specifications.
(e) Damage resulting during shipment. (Claim must be presented and examined by the shipper).
(f) Damage or service resulting from modifications or alterations to a Product In any way (including any alteration or removal of its serial number or identification marks).
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO A PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE , GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO A PRODUCT SHALL BIND CANON (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU). CANON SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY LOSS OF FILM) CAUSED BY THE USE OR MISUSE OF, OR INABILITY TO USE, A PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL RECOVERY OF ANY KIND AGAINST CANON BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY CANON AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR MISUSE OF, OR INABILITY TO USE, THE PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON (SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU). THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF A PRODUCT, OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT. AND STATES YOUR EXCLUSIVE REMEDY.
This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state (or prov!nce to prov!nce In Canada).
Canon U.S.A., Inc.
Canon Canada, Inc.

Register Now!

Visit www.registercanon.com to register your new EF & EF-S Lenses today and receive the following:

Canon CT1 B012 C Interchangeable Lens - promotions

  • Telephone support*
  • E-mail support*
  • Product protection*
  • Receive information on new products and promotions
    There is no charge to register or for the benefits offered.
    These benefits valid in the U.S. only.
    Please read the Terms and Conditions at www.registercanon.com for complete details.
    | For accessories and other supplies
    visit www.estore.usa.canon.com or
    an Authorized Canon Dealer.
    © 2016 CANON U.S.A., INC.

Expand Your Photographic Knowledge

  • Useful lessons on EOS Digital cameras, printers, software applications, wireless connectivity and more
  • Expanded Tips & Technologies section with improved product and category search capabilities
  • An enhanced Se Mee ee Ce Rm et 4a & PrintMasters Gallery section
  • Improved Educational Events calendar with customizable views
  • Completely FREE access

www.usa.canon.com/dlc

Canon CT1 B012 C Interchangeable Lens - promotions1

Canon Customer Support
Canon Client Soutien

Canon U.S.A.
You may obtain technical support for your Products as follows:

  • Internet support at www.usa.canon.com/support (E-mail support also available)

  • Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666).
    Canon Canada
    You may obtain technical support for your Products as follows:

  •  Internet support for English at www.canon.ca/english/cs (E-mail support also available)

  • Internet support for French at www.canon.ca/francais/cs (E-mail support also available)

  •  Telephone assistance from a Canon Canada Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666).

Technical support program terms are subject to change without notice.
Canon U.S.A., Inc.
Canon Canada, Inc.

Canon- logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals