KLH Kendall 2S Surround Loudspeaker Owner’s Manual

June 16, 2024
KLH

Kendall mk2 Collection
Kendall 2S Surround Loudspeaker
KLH Kendall 2S Surround Loudspeaker -

WELCOME!
Thank you for purchasing one of the best sounding loudspeakers ever produced. At KLH, we have been making high-quality components since 1957, and we take pride in making your music and movies the best experience possible.

FOR YOUR SAFETY

Important Safety Instructions!

  1. READ these instructions.
  2. KEEP these instructions.
  3. HEED all warnings.
  4. FOLLOW all instructions.
  5. DO NOT use this apparatus near water.
  6. CLEAN with dry cotton cloth. Do not use microfiber.
  7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other heat producing appliances
  9. USE ONLY attachments/accessories specified by the manufacturer.
  10. DO NOT expose to excess moisture or liquids, and do not place containers with liquids on top of speakers.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

EU COMPLIANCE INFORMATION:
Eligible to bear the CE mark, Conforms to European Union EMCDirective 2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/ drivers.dEC; European Union WEEE Directive 2002/96/EC.
KLH and the KLH logo are registered trademarks of Kelley Global Brands Inc., registered in the U.S. and other countries.

WEEE NOTICE
Note: This mark applies only to countries within the European Union (EU) and Norway.
This appliance is labeled in accordance with  European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

UNPACKING

Place package on the floor or table top with the box flaps up. Cut the tape with a utility knife to open the package.
Fold the carton flaps back and carefully slide the speaker and packaging from the box, or turn the box over with flaps open and remove the box. Stand the speaker and packing upright, making sure the speaker is right side up, and remove the packing material.

CONNECTION AND MOUNTING

The mounting hardware functions as a speaker wire connector that completes the connection when the speaker is placed on the mounting cleat. The negative is on the left side of the bracket, and the positive is on the right The 2S surround speakers can be placed behind or to either side of the main listening area. See figure to the right for suggested surround location.
It is extremely important to mount the center of the bracket to a wall stud.

KLH Kendall 2S Surround Loudspeaker - Adhesive rubber2

ALTERNATE CONNECTION

There is also a conventional input cup on the back of the speaker in case an alternative mounting hardware is used.

KLH Kendall 2S Surround Loudspeaker - CONNECTIONKLH Kendall 2S Surround Loudspeaker - Adhesive
rubber

ROOM POSITION

Placement of your loudspeakers is a personal preference, but it is recommended that speakers be placed at least 6 feet apart whether they are being used for a stereo application, or as the main left and right channels for a home theater. For best imaging and separation, listening distance from the speakers should be about 1.5 times the distance the speakers are apart from each other.

KLH Kendall 2S Surround Loudspeaker - ROOM POSITION

WARRANTY

Our 10 year warranty begins from purchase date of the item.
(Receipt Date) Warranty registration must be completed at KLHAUDIO.com/warranty. Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for  proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.
The following is NOT COVERED by the warranty:

  1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
  2. Incorrect use of product.
  3. Altered serial number.
  4. Transportation costs for service call.
  5. Purchase of KLH products from unauthorized reseller.

Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement. KLH toll free number is 1-833-554-8326

SPECIFICATIONS

Kendall 2S Surround Loudspeaker

Enclosure 2-Way
Power Bi-Pole
handling Surround
Peak Power Handling 200 Watts.
Frequency 800 Watts
Response 90Hz-20kHz.+/-3dB
Impedance Crossover 8.
Frequency 2,500Hz
Sensitivity in Room 91dB. 2.83V/1m
Sensitivity Anechoic 88dB. 2.83V/1m
Tweeter Dual 1” Titanium Dome Tweeters
Woofer Dual 5.25” Aluminum Cone Woofers
Finishes English Walnut Wood Veneer or Black Oak Wood Veneer
Dimensions: 8.25” x 11” x 6” (H x W x D).
Weight: 14 lbs.

5520 Pebble Village Lane, Suite 100
Noblesville, IN 46062
klhaudio.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals