E-Klasse W213 Complete Set Active Parking Assistant Parktronic

Product Information

Specifications

• Product Name: Complete Set Active Parking Assistant
  Parktronic

• Version: v1.0 (01.02.2023)

• Manufacturer: Kufatec GmbH & Co. KG

• Address: Dahlienstr. 15, 23795 Bad Segeberg

• Email: info@kufatec.de

General Notes

Please read the following instructions carefully before
installing the Complete Set Active Parking Assistant
Parktronic.

Safety Instructions

Ensure to follow these safety instructions during
installation:

1. Disconnect the vehicle’s battery before starting the
   installation process.

2. Wear protective gloves and goggles while handling the
   components.

3. Do not install the product in wet or damp conditions.

4. Avoid direct contact with electrical components.

Requirements for the Intended Use

In order to use the Complete Set Active Parking Assistant
Parktronic, the following requirements must be met:

• Compatible vehicle model and year (refer to the product
  manual).

• Basic understanding of vehicle wiring and assembly.

• Standard toolset for automotive installation.

Product Usage Instructions

Assembly Instructions

To assemble the Complete Set Active Parking Assistant
Parktronic, follow these steps:

1. Refer to Figure 3: Vehicle Overview for cable routing and
   component positions.

2. Lay the cable set in the most convenient and shortest way
   possible.

3. Refer to the relevant sections of the manual for detailed cable
   routing instructions.

Disassembly Instructions

To disassemble specific parts of the vehicle, follow these
steps:

1. Disassembly front bumper:

   • Follow the instructions provided in section 10 of the
     manual.

2. Disassembly covering engine compartment:

   • Follow the instructions provided in section 11 of the
     manual.

3. Disassembly sill trim front driver’s side:

   • Follow the instructions provided in section 12 of the
     manual.

4. Disassembly center console:

   • Follow the instructions provided in section 13 of the
     manual.

5. Disassembly main unit:

   • Follow the instructions provided in section 14 of the
     manual.

6. Disassembly back seat:

   • Follow the instructions provided in section 15 of the
     manual.

7. Disassembly covering rear driver’s side:

   • Follow the instructions provided in section 16 of the
     manual.

8. Disassembly rear bumper:

   • Follow the instructions provided in section 18 of the
     manual.

Assembly Instructions

To assemble specific parts of the vehicle, follow these
steps:

1. Assembly rear sensors:

   • Refer to section 19 of the manual for detailed
     instructions.

2. Assembly front sensors:

   • Refer to section 20 of the manual for detailed
     instructions.

3. Assembly sensor holders with adhesive pads:

   • Refer to section 21 of the manual for detailed
     instructions.

4. Assembly/Connection control unit:

   • Refer to section 22 of the manual for detailed
     instructions.

5. Cable routing to the rear:

   • Refer to section 23 of the manual for detailed
     instructions.

6. Cable routing to the front:

   • Refer to section 24 of the manual for detailed
     instructions.

7. Connection main unit:

   • Refer to section 25 of the manual for detailed
     instructions.

8. Connection EZS/EIS control unit:

   • Refer to section 26 of the manual for detailed
     instructions.

9. Assembly/Connection warning buzzer:

   • Refer to section 27 of the manual for detailed
     instructions.

10. Connection ground:

    • Refer to section 28 of the manual for detailed
      instructions.

11. Connection bridge Parktronic control unit:

    • Refer to section 29 of the manual for detailed
      instructions.

12. Connection fuse box:

    • Refer to section 30 of the manual for detailed
      instructions.

13. Note exchange rear view camera (if a rear view camera is
    installed):

    • Refer to section 31 of the manual for detailed
      instructions.

14. Cable routing rear view camera:

    • Refer to section 33 of the manual for detailed
      instructions.

15. Exchange rear view camera:

    • Refer to section 34 of the manual for detailed
      instructions.

16. Assembling the vehicle:

    • Refer to section 35 of the manual for detailed
      instructions.

Coding and Additional Functions

To code and access additional functions, follow these steps:

1. Coding interface:

   • Refer to section 37 of the manual for detailed
     instructions.

2. Additional vehicle function:

   • Refer to section 38 of the manual for detailed
     instructions.

FAQ (Frequently Asked Questions)

1. Q: What should I do if I encounter any issues during the
   installation process?

A: If you face any difficulties or have questions during
installation, please contact Kufatec GmbH & Co. KG at
info@kufatec.de for assistance.

Installation Instructions
Complete Set Active Parking Assistant Parktronic
v1.0 (01.02.2023)

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de

1

Contents

1 Liability Exclusion

3

2 Copyright

4

3 General notes

4

4 Safety Instructions

5

5 Requirements for the intended use

5

6 How to connect a cable to another

6

7 Note Cable Inscription/Color

7

8 Assembly Instructions

8

9 Assembly Note

9

10 Disassembly front bumper

10

11 Disassembly covering engine compartment

12

12 Disassembly sill trim front driver’s side

13

13 Disassembly center console

14

14 Disassembly main unit

15

15 Disassembly back seat

16

16 Disassembly covering rear driver’s side

17

17 Disassembly fuse box trunk – Coup´e

18

18 Disassembly rear bumper

19

19 Assembly rear sensors

20

20 Assembly front sensors

21

21 Assembly sensor holders with adhesive pads

23

22 Assembly/Connection control unit

24

23 Cable routing to the rear

25

24 Cable routing to the front

26

25 Connection main unit

28

26 Connection EZS/EIS control unit

29

27 Assembly/Connection warning buzzer

30

28 Connection ground

31

29 Connection bridge Parktronic control unit

32

30 Connection fuse box

33

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de

2

31 Note exchange rear view camera (if a rear view camera is installed)

34

32 Disassembly tailgate covering – Coup´e

35

33 Cable routing rear view camera

37

34 Exchange rear view camera

38

35 Assembling the vehicle

39

36 Important Note: Assembly Park Assist Sensors

39

37 Coding interface

39

38 Additional vehicle function

39

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de

3

8 Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.

3

12

4

7

5,6

8

2 1 1
3

8 8
68
7

1

1

2

4

8

5

8

8

Figure 3: Vehicle overview
· 1 Front Park Pilot sensors · 2 Park Assist sensors (brown) · 3 Main unit · 4 EZS (German abbreviation for electronic ignition switch, EIS) · 5 Parktronic control unit, ground connection, warning buzzer · 6 Fuse box (steady plus Kl.30) · 7 Rear view camera (if installed) · 8 Rear Park Pilot sensors
Please be aware that this overview is only for illustration purposes. Always lay the cable set in the most convenient and shortest way possible. For a detailed description of the cable routing, please refer to the relevant sections of the following manual.

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de

9

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>