Speakers E6-L Bluetooth Speaker User Manual
- June 9, 2024
- Speakers
Table of Contents
Speakers E6-L Bluetooth Speaker
Warnings
- To ensure proper use and trouble-free operation, please carefully read this user manual first.
- For the first use, a full charge is recommended. Please use and store the product at room temperature.
- Do not throw and drop the product to avoid damages.
- Do not expose the product to fire, high temperature, direct sunlight, etc.
- Do not use organic solvents or other chemicals to clean the product.
- Do not allow small particles to get into the product. Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.
- Do not dissemble the product, or make any moditications to the structure or any parts of it.
- Keep the product out of children’s reach. lf the battery is not properly replaced, there will be an explosion accident, which can only be replaced with the same type of battery.
- Batteries (battery packs) can not be exposed to such conditions as sunshine, fire or similaroverheating conditions
Packing contents
Instructions of buttons
- Press: turn up press and hold: skip to the next track
- Under playback: press to play/pause
- When a call comes in: press to receive, end; press and hold to reject.
- Disconnection : press and hold 2s, disconnect the Blueto oth.
- RGB display: press two times to shift different display modes.
- Press : turn down press and hold: skip to the previous track.
Press to switch standard and bass enhancingmodes
LED indicator
- Power on: Blue LED flickering, it stays once Bluetooth connected.
- MAX/MIN vol.: blue LED quick flashing.
- Power button: press and hold 2s to turn on or turn off/ press two times to check battery capacity.
- Reset: press and hold 8s to reset.
- Modes shifts: press to shift different modes(Bluetooth->Micro SD ->AUX IN) need insert Micro SD card +3.5mm audio cable
Instructions of parts
-
Micro SD playback
Insert a Micro SD card under powered on state, E6-L will play the music from the Micro SD card automatically. -
Indicating LED
the red LED is on during charging, it’s out once fully charged -
Audio cable
Insert an audio cable, E6-L will shift to AUX In mode automatically. -
Charging
Take an adapter of DC 5V-1A(or above) orvia an USB port of computer to charge. -
Data transfering
Power off E6-L, insert a Micro SD card, meanwhile,let a data cable connect E6-L toa computer, press the power button of E6-L to enter card reader mode, then,we can access the data on the Micro SD card through the computer. -
Check the battery’s capacity
Power on E6-L, press two times on power button, check the colors of light. green: capacity is over 65% orange: capacity is 30-60% red: capacity lower than 30%, need charge.
Bluetooth connection
-
Poweron E6-L
Press and hold the power button for 2s, its LED flickers, it means ready to paira Bluetooth device. -
Connect to a Bluetooth device
Go to Bluetooth page of the device, search and connect the paring name”E6-L”, The LED will stay once connected
This BT device and E6-L will reconnect each other in the future use.
TWS
(True Wireless Stereo) function it means we can play two speakers at the same time.
-
How to set the TWS
Prepare 2pcs E6-L, turn on them, and both are under Bluetooth available state; Take either of E6-L, press” “at the same time, the TWS is done with a prompt sound. -
Let the TWS set connect to a Bluetooth device
Go to Bluetooth page of the device, search and connect the paring name” E6-L’, The LED will stay once connected. -
How to disconnect the TWS
Take either of E6-L, just press” “at the same time.
Tips
- the one you took to press*- to set I WS, is the main speaker & left channel and the other one is the following speaker & right channel.
- a TWS set only support 2pcs E6-L.
- TWS set will keep the consistency of main/following speakers, both will reconnect each other automatically when powered on.
- When the TWS set is done, the LED offollowing_E6-L keep staying, and the LED of main_E6-L will indicate the playback/pause/connecting via flickering/stay.
- Press the buttons on either E6-L has same operations.
Specitications
Basic parameters
Speaker Type| Bluetooth speaker
Storage Type| Support Micro SD card within 32GB capacity
Power supply| Built-in 3.7V/5000mAh li-ion battery
DC 5V-1A power, the charging time is around 6 hours
Technical parameters
Drivers| 2pcs 50mm positive drivers+2pcs 60mm bass enhancing radiators.
Frequency response| 60-20KHZ
Bluetooth version| Bluetooth 5.3
USB| USB2.0, compatible with USB1.1
Formats on Micro SD card MP3、WMA、WAV、APE、FLAC
Bit rates| MP3: 8Kbps-320Kbps WMA: 32Kbps-384Kbps MAV: 32Kbps-1414Kbps
Product size: 193x75x75mm
Product weight: 508g(built-in battery)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>