Lorelli Toy Scooter DRAXTER PLUS Instruction Manual

June 4, 2024
lorelli

Lorelli Toy Scooter DRAXTER PLUS

Scan the QR code to get more product information and manual instruction in more languages. ownload QR Scanner App onto your device

PACKAGE CONTENT

  1. Handlebar stem – 1 pc
  2. Seat with support leg – 1 pc.
  3. Scooter body set -1 pc
  4. Plate -1 pc.; Hexagon bolt M5x14 – 2 pcs.
  5. Screw M5x60/24 – 1 pc,; Square nut M5 for the seat – 1 pc
  6. Combined Tool (Allen key and X Screwdriver) -1 pc.
  7. Foot rest-1pc.
  8. Bracket -1 pc.; Hexagon bolt M5x14 for mounting a backrest- 2pcs.
  9. Backrest – 1 pc.
  10. Support plate-1pc.; Hexagon bolt M5x14 for mounting -2pcs.
  11. Stem for pushing and control -1pc.

ASSEMBLY INSTRUCTIONS



IMPORTANT- READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!

WARNING

  • WARNING! Read and follow all the warnings and instructions written in this manual before using the scooter!

  • WARNING! You shall read, follow or understand all the basic operational instructions and warnings stated in this manual, otherwise there is a serious risk of injures as a result of collisions, falls or loss of control.

  • WARNING! The common sense and the good judgement are very important to avoid any accident or injury!

  • WARNING! The product should be properly assembled by an adult!

  • WARNING! Never leave the child unattended! :

  • WARNING! To be used only under the direct adult supervision!

  • WARNING! Keep your fingers and toes away from all moving parts of the scooter!

  • WARNING! Do not modify the product!

  • WARNING! Protective equipment should be worn (helmets, gloves, knee-pads, elbow-pads).
    Not to be used in traffic. 20 kg max.

  • WARNING! Maximum weight : 20 kg., Recommended Age: 3+ years!

  • WARNING! The scooter shall be used with caution, since skill is required to avoid falls or collisions causing injury to the user or third parties.

  • WARNING! Before each use please inspect the suspension, the fastening and the fixing of the components and of the locking devices, because in the course of time they may lose their effectiveness.

  • WARNING! Do not ride in darkness !

  • WARNING! Not suitable for children under 36 months. Small parts. Risk of falling.

  • WARNING!lmages on the title page and in the instruction manual are only illustrative and may differ from the real product.

IMPORTANT NOTE AND ADVICES

  • Use the product on suitable surfaces: flat, clean, dry and where possible away from other road users.
  • Be very careful when riding on wet surfaces due to reduced wheels traction and braking action!
  • Keep away from roads or where there is incoming traffic.
  • Do not ride on slippery surface.
  • Avoid riding on stairs as the scooter might overturn causing serious injuries.
  • Use at least the following protective equipment: hand/wrist, knee, head and elbow protection.
  • Please check that the steering system is correctly adjusted and that all connection components are firmly secured and not broken.
  • Make sure that you are ready for use in order to avoid pitching or entrapment.
  • Always wear shoes.
  • Mechanism to reduce speed will get hot from continuous use, do not touch after braking!
  • The product shall be use from only 1 person!
  • The product is not intended for extreme sports!
  • Please keep your feet on the scooter plate and never ride whit one single hand!

SERVICING AND MAINTENECE

PLEASE NOTE, THE REGULAR MAINTENANCE ENHANCES THE SAFETY OF THE TOY SCOOTER.

  • Please check and tighten periodically the self-locking nuts and other self-locking fixings as they may lose their effectiveness.
  • Replace the bearing if they are outworn! WARNING! – Bearings and wheels are consumable and will not be warranted!
  • No modification other than to the manufacturer’s inotructions ohall be made.
  • It is advioed to inopect and maintain the scooter before use.
  • Do not keep the ocooter under direct ounlight or in wet places for a long time. The scooter may be damaged.
  • Clean the scooter periodically and keep it dry.
  • It is advised to use periodically oil for lubrication.
  • You may use damp cloth and a mild detergent for cleaning the product.

SAFETY RIDING

  • This scooter shall not be used on public highways. Otherwise you can cause a traffic accident. Death or serious injury can occur!
  • Do not ride the product under the influence of alcohol, drugs or medicines.
  • Avoid uneven pavements or pot-holes, as this may cause you to lose control ol the scooter.
  • Do not ride the scooter in bad weather conditions, like strong wind, heavy rain or snow.
  • Please do not use the scooter or slow down the speed ii the surface are poor.
  • Don’t carry anything in your hand while riding the scooter. Always ride it with both hands.
  • Avoid the using of earphones/ headphones as they may restrict your hearing.
  • Do not wear loose/ hanging clothing or scarves, as they may get caught in the wheels.
  • When you are riding near palied vehicle, look out for car doors which can be opened.
  • Ensure that there are no broken components and that the locking devices are engaged.
  • The product is intended for users 3+ years old , 20 kg max

BREAKING

Picture A 18 . The rear wheel cover functions as a brake , apply the brake by stepping on the brake pedal (rear wheel cover).Before the first riding of your scooter it is recommended to train the applying of the brake at various speeds and in an open area, free from people and objects.IMPORTANT! Faster speeds require longer braking distances.
press the brake mechanism with your foot. Sudden braking on low-traction surfaces ( wet ,sandy ) may cause wheel slips or falls. When the seat is mounted, the braking is by feel.

CHILD SAFETY

  • Never leave the child unattended.
  • Always check the product for any loose screws, nuts and bolts before letting your child ride it.
  • Instruct your child how to ride the scooter safety and make sure your child is capable of riding it.
  • Make sure your child wear protective equipment to avoid injuries incl. helmets, gloves, knee pads, elbow-pads.
  • Never let your child ride the scooter on the road.

ASSEMBLY

Assembling the scooter with a seat and a stem for pushing and control:

Important! You have the opportunity to choose from 6 heiuht adjustment options ol !he seat The following combinations are possible: C+2, C+3, B+2, B+3A+2, A+3 (see Photo A14).

  • Put the handlebar stem (B1) through the hole in the foot rest (B7). (Picture A1)
  • Insert the handlebar stem in the provided hole on the scooter’s body (B3), press the locking button and press down the stem until you hear a “Click” sound (Picture A2)
  • By mounting the seal (B2) you have the option to choose from lhe three height adjustment positions (Picture A3). Select one of the options accordinu to the combinations described above and insert the support leg in the relevant position under the seat, mount the plate with the bolts (Picture A4) using the tool provided (B6).
  • Install the support plate (B10) under the rear end of the seat with 2 pcs. hexagon bolts. (Photo A5) Please note Iha! if you have chosen to insert the support leg in position 3, you shell insert al first !he support leg in position 3 and after that you hall start with the mounting of the support plate, because in this case the support plate serves as a mounting plate (Photo A 14)!
  • Insert by pressing the front of the seal in the desired height position (Picture A6, A7) and then mount the seal lo the handlebar stem with a bolt and nut ( B5).
  • Put the stem for pushing and control (B11) through the support plate (Picture AS). Insert the stem into the provided hole on the scooter’s body, press the lock button and press down lhe stem until you hear a “Click” sound (picture A9).
  • Install the backrest (B9) using the bracket (BS) and 2 pea. hexagon bolts (Picture A 10)

Assembling the scooter with a seat and without a stem for pushing and control:

Assembling the scooter with a seat and without a stem for pushing and control:
Important! You have the opportunity to choose from 5 height adjustment options of the seat. The following combinations are possible: C+2, 8+1 , 8+2 A+1 , A+2 (see Photo A14).

  • Put the handlebar stem through the provided hole on the scooter’s body, press the locking button and press down the stem until you hear a “Click” sound (Picture A 11)

  • Disassemble the support leg from the scooter’s body together with its plastic bases (Photo A 12).

  • Remove the base of the stem for pushing and control and install on its place the support leg with its plastic bases. (Picture A 13)

  • Please note. that after the removing of the base for the stem. you cannot use this base again, because it will be damaged during the removing process!

  • Insert by pressing the front of the seat on the desired height position (P’icture A 15) and then mount the seat to the handlebar stem with a bolt and nut ( 85). Insert the support leg on the desired position under the seat, mount the plate with the bolts (picture A 16) using the tool provided (86).
    Assembling the scooter without seat and without a stem for pushing and control:

  • Put the handlebar stem through the provided hole on the scooter’s body, press the locking button and press down the stem until you hear a “Click” sound (Picture A 11)

HEIGHT ADJUSTMENT OF THE HANDLEBAR STEM AND OF THE STEM FOR PUSHING AND

CONTROL

Step 1 – Release the locking mechanism. (Picture A 17-1)
Step 2 – Press the button (Photo A 17-2) and select from the 3 positions by moving up or down.
Step 3 – Close the locking mechanism.

Didis LTD, Bulgaria
Shumen 9700, N2 6 Trakia-iztok street
Tel.: +359 54 850 830
e-mail: home.market@didis-ltd.com
e-mail: export@didis-ltd.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals