Jumbo 1110100010 Dessineo Sticker Studio Instruction Manual
- June 12, 2024
- JUMBO
Table of Contents
Jumbo 1110100010 Dessineo Sticker Studio Instruction Manual
Descriptions
Installations
-
Take the sticker sheets out of the drawer.
-
Refill the water compartment.
a. Take out the water compartment.
b. Remove the lid.
c. Add water up to the MAX line.
d. Put the lid back on
(e) -
Choose a sticker, colour it in, wait for the felt-tip pen to dry, pass it through the roller, with the drawing facing upwards (e) and stick it wherever you want.
Create scenes!
- Choose the stickers to create your scene.
- Decide on the layout first.
- Colour them in and wait for the felt-tip pen to dry.
- Pass them through the roller one by one and stick the bottom ones first.
Troubleshooting
If the roller does not pick up the sticker.| Gently push the sticker in a
little further with your fingers while turning the roller towards you.
---|---
If the sticker does not stick.| Check that the water in the water compartment
is up to the MAX line and pass it back through the roller.
If the sticker comes out wet on the drawing side.| Check that there is not too
much water in the water compartment.
If the colour runs| Check that there is not too much water in the water
compartment. Wait for the felt-tip pen to dry completely before passing the
sticker through the roller.
NOTE: We recommend emptying and drying all parts completely before storing the toy.
Keep these instructions for future reference. Close the caps after use. Always protect clothing and work area. It is recommended to be used under an adult’s supervision.
Published by Koninklijke Jumbo B.V.
Westzijde 184, 1506 EK Zaandam,
The Netherlands
James Galt & Co. Ltd.,
Cheadle, Cheshire, England, SK8 2EA.
© 2023 Koninklijke Jumbo B.V.
Jumbodiset Group. All rights reserved.
Game concept © Fun-damental consulting Ltd
jumbo.eu
Illustrations: Purificación Hernández
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>