Refoss 210902 Smart Thermostat for Combi Boiler Water Underfloor Heating User Manual
- June 16, 2024
- Refoss
Table of Contents
User Manual
7 Things
You Need to Know
About Homekit
Take a picture and save ‘the code Paste Here
Homekit Setup Code
Works with
Apple HomeKit
Wi-Fi request
Connect your iOS device to a 2.4 GHz home Wi-Fi while setting up HomeKit. If you use the same Wi-Fi name for both your 2.4GHz and SGHz Wi-Fi and you fail many times during the setup, you need to turn off the SGHz band for a while. Make sure your smart device is covered by strong Wi-Fi signal during the setup. otherwise it may not respond to the Home app.
iOS version request
iOS 13 or ater is required to set up and manage this smart device with HomeKit. It is highly recommended that you upgrade to iOS atest version.
Read the user manual carefully
Read the user manual carefully to set up HomeKit or you might fail. Since much more useful nformation is covered in Installation Guide, How to Use and FAQ, Refoss user manual will guide you through setting up your device and troubleshooting as needed.
HomeKit remote control
Given the safety design of Apple, you will only be able to control your smart
device while your iOS device s in the same Wi-Fi network. To enable HomeKit
remote control. you need a HomePod, an Apple TV 4K or Apple TV HD, or an iPad.
Set any of these Apple devices in your house as a home hub and connect it to
your home Wi-Fi network. Keep in mind that once your home hub is set up, it
has to be kept online. If it is powered off or disconnected from the Wi-Fi
network, it will fail to respond when you control your smart device remotely.
For more information on how to set up your home hub, check t out at
https://support.apole.com/en-us/HT207057
Share HomeKit with your family
While tapping the icon on the top left of the Home app, you can invite your families to share control of your devices with the use of the Apple ID. Once they accept your invitation, they’ll be able to manage devices in your Home app. You may find that your Scene and Automa tion settings are not visible on the shared iOS device. That means you don’t authorize the user to edit accessories. Enabling the function will solve this issue. For more information, check it out at https://support.apple.com/en-us/HT208709
Homekit Scene and Automation
You can add a Scene by tapping the + icon on the top right of the Home app.
For adding Automation, just find it on the bottom menu bar. It can group your
smart devices and make them perform automatically.
For more information, check it out at https://support.apple.com/en-
us/HT208940
eHomeLife app and Home app
You may think you don’t need the eHomelife app while you are using the Home
app. Well, that’s not the case. The Home app won’t inform you there’s a new
firmware available or upgrade the device while the eHomelife app will. Most
importantly, the eHomelife app can help you find your lost HomeKit setup code
when you need to set up HomeKit again.
Then how to use the eHomelife app? You can set up your smart device in the
eHomelife app and it will be automatically added to Apple Home app. Or, you
can add the smart device to the eHomelife app after pairing it with the Home
app.
Alright. now you are an expert in HomeKit and you can share your knowledge
with your families and friends. May you enjoy your life with Refoss and
HomeKit. Should you need any help. you can contact
support@refoss.net.
SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@refoss.net
Website: www.refoss.net
Manufacturer: Chengdu MerossTe<:hnologyCo .. Ltd
Address: No1312 BuildingE6-1.Tanfu Software Park.Chengdu China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>