Refoss C1O-P24 Smart Wi-Fi Garage Door Opener User Manual

C1O-P24 Smart Wi-Fi
Garage Door Opener
User Manual

Safety Information

1. Keep the device away from water. fire, humidity or hot environments.
2. Please plug in the socket in proper condition and away from children.
3. Do not attempt to disassemble. repair. or modify the device.
4. For indoor use only.
5. This product should not be exposed to direct sunlight.
6. When you leave the product unused for a long time unplug the product fromthe power outlet.

Package Contents

*If you find any part is missing in the package, please contact support@refoss.net, we will provide proper solution for you.

Installation Guide

1. Refoss smart garage door opener is the companion device of Yourexisting garage door openerIts main working principle is as follows.
2. Download the Refoss app and choose Smart Garage Door Opener to get start https://bucket-refoss-static.refoss.net/refoss/production/qrcode/refoss.html
3. Power on the device. Wait about 5 seconds until the status LED blinks amber and green
4. Connect the device to your home WiFi with Refoss app.
5. Connect the sensor cable. Move the sensor to check if it is functional”*Please contact support@refoss.net for help if the sensor s not functiona
6. Find a proper position on the garage door to mount the sensors®. Please make sure the distance between the two sensors is less than 1 inch when the garage door is closed, and the two sensors are well separated when the garage door is open. * You can use the included double-sided adhesive tapes o screws for sensor fixation,
7. Power off your existing garage door opener. Connect the other end of the signal control cable to the two terminals that connects to the wall button. Wire order does not matter here.
8. Deploy the device. We recommend to deploy it on the top of your existing garage door opener. Use the provided double-sided adhesive tapes for the fixation if necessary.
9. Power on both existing garage door opener and smart garage dooropener. The smart garage door opener will reconnect to Refoss cloud service automatically. Congratulations! You have completed all installation steps.

LED and Button Rules

Solid amber: Initialization/ Reset/ Firmware upgrading mode.
Flashing amber and green slowly: Configuration mode.
Flashing green rapidly: Wi-Fi connecting mode.
Solid green: Successfully connected
Solid red: No internet connection.
Flashing green 3 times: Sensors connected or disconnected(Door close or open detected).
Off. Powered OFF.

How to Use

1. General Settings Device name: Change device name.
   LED: Turn on/off LED.
   Operation history: Check operation history.
   User manual: Check user manual

2.  Voice Control Door number: The garage door number, used for voice control function to distinguish different doors, PIN code: After enable this. PIN code verification is needed each time.
   Amazon Alexa & Google Assistant: Check Amazon Alexa & Google Assistant user manual
   Amazon Alexa
   The voice commands are as following:
   ~”Hi Alexa, open/close my garage”
   -“Hi Alexa, lock/unlock my garage.”
   ~”Hi Alexa, is my garage closed/unlocked?”
   Note : Please replace ‘garage’ to the garage door name you set. Amazon Alexa support Security Code. you can enable it via Amazon Alexa app.
   Google Assistant:
   The voice commands are as following: ley Google. open/close garage door.”
   ~”Can I have your security code?”
   ~Hey Google. is garage door opened/closed?”
   Note:
   1. Please replace the ‘garage door’to the garage door name you set.
   2.PIN code is required to set by google for security concern.

3. Door notification
   Open: Send me a notification each time my garage door opens.
   Close: Send me a notification each time my garage door closes,
   Overtime reminder: Send me a notification when my garage door opens for 10-60 mins.
   Overnight reminder: Send me a notification when my garage door is still open after particular time.

4. Special settings Overtime Close: Close the door automatically when the door opens for a period of time.
   Fixed time close: Close the door automatically when the door is still open after particular time.
   Opening time: Choose the proper time duration for your garage door opener. App use it as a timeout parameter to confirm the status of your garage.
   Trigger Duration: Choose the proper trigger duration if you find your Refoss app can’t fully close or open your garage door. The trigger duration is the same time as you press the garage wall button

5. Widgets
   Widgets are the quick access to your Refoss devices and Scenes. To enable it, please go to User -> Widget to add shortcuts first. And then follow below steps on your smartphones to activate them.For iPhones:
   1. Swipe to the right on your Home or Lock screen.
   2. Scroll down to the bottom of your widget list and then tap edit
   3. Scroll down to find Refoss and add it For Android smartphones:
   1.0n the home screen, tap and hold on an available space.
   2. Tap Widgets, find Refoss widget and then add it

FAQ

At Refoss we strive to assure your satisfaction. Any questions about Smart Garage Door Opener please feel free to contact support@refoss.net.

1. Can | manage multiple smart garage door openers within Refoss app?

One smart garage door opener is for one garage door only, you can configure multiple smart garage door openers within the app.

2. What shall | do when my Refoss app is unable to control the added smart garage door opener?

Please check the followings: Check the main Wi-Fi's interet connection. Make sure that main Wi-Fi's password hasn't been changed. Factory reset the device and try to configure its Wi-Fi part again Refoss products are covered by a 12 months limited warranty from the date of its original purchase. If any problems occur. please contact support@refoss.net for help. We can only provide aftersales service for products that are sold by Refoss or Refoss authorized retailers and distributors

FCC Compliance Information Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the ser’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. and if not installed and used in accordance with the instructions. may  cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help, This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimunm distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compli- ance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@refoss.net
Website: www.refoss.net Manufacturer: Chengdu Meross Technology Co.,
Ltd. Address: No. 1312, Building E6-1,
Tianfu Software Park, Chengdu, China
CAN ICES-3 (B)/NMB-3(B) MADE IN
CHINA INDOOR USE ONLY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>